GN oilfield flare ignitor system is also called Electric Ignition Device.The flare ignitor used for igniting gases from mud gas separator.

An Flare ignition system for flares is described particularly suitable for use in remote areas with limited facilities and which includes as components a power source and specifically storage batteries with a solar battery for recharging and having an associated gasoline engine driven blower for supplying air for ignition, together with an ignition panel

oilfield flare Ignitors system

adapted for ready connection to a source of fuel gas, to the blower, to the power source, to the stack pilot, to the pilot ignitor and if desired to the flare header for purge gas supply. The panel preferably includes a manually oprable push button for an ignition spark plug, has indicators of pilot operation and has manual control of the delivery of fuel gas for ignition, for use as pilot gas and for use as purge gas. A thermocouple is provided at the pilot for control of indicating lamps indicative of pilot operation or non-operation as well as purge failure.

Flare Ignitor is also called oilfield torch unit.

Flare Ignitors ffshore exploration and well testing. Our models are available in 12 volt solar or 110 volt electric, each comes with a standard manual flame detection, and if requested can be fitted with a thermocouple for detection and monitoring. Continue reading →

Both horizontal sand pump and vertical sand pumps are used in HDD(horizontal directional drilling) and oil gas drilling fluids system.

Horizontal sand pump

• Horizontal sand pumps

Horizontal sand pump is an important equipment in oil rig mud cycling system, be able to deliver corrodive drilling fluid(with suspended particulates) or other liquid media under similar work condition, are the best optional pumos of sand removers, mud recovers and mixing hoppers as well as perfect perfusion pumps of mud pumps. For design of their parameters, that equipment with which such pumps are used together can operate under the best work condition has been fully considered. These pumps are mainly characterized by good versatility and exchangeability of parts, less leakage of shaft seal, reliable operation, long service life and convenient maintenance.

Horizontal sand pump are used for feeding drilling fluids mud cleaners,mud desander,desilters.And provide the force for particle separation of drilling fluids.

• Vertical Sand pump Application Instruction

Vetical sand pump in drilling mud circulation system is usually submersible pump,it usually used to feed drilling mud decanter centrifuge,and sometimes also used to feed mud cleaners,desanders,desiters. Continue reading →

Drilling mud vacuum tank degasser is one type of degasser in oil gas drilling fluids system.Another type of degasser is called Atmospheric Degasser.

Both of the vacuum degasser are devices that removes air or gases (methane, H2S, CO2 and others) from drilling fluids. There are two generic types that work by both expanding the size of the gas bubbles entrained in the mud (by pulling a vacuum on the mud) and by increasing the surface area available to the mud so that bubbles escape (through the use of various cascading baffle plates). If the gas content in the mud is high, a mud gas separator or “poor boy degasser” is used, because it has a higher capacity than standard degassers and routes the evolved gases away from the rig to a flaring area complete with an ignition source.

GN Drilling mud vacuum degasser.

ZCQ240 Degasser

Vacuum tank degasser

ZCQ270  Degasser

ZCQ300 Degasser

ZCQ360 Degasser.

Vacuum Tank Degasser

Vacuum Type is the most common form of degasser. It can be horizontal, vertical or round vessel. A vacuum action is created to pull in the gas cut mud. When the liquid enters the tank it will flow and be distributed to a layer of internal baffle plates designed for the mud to flow in thin laminar film and is exposed to a vacuum that forces the gas to escape and break out of the mud.The vacuum pump moves the escaping gas from the vessel discharging it to the rig’s flare or environmental control system.

Derrick mud vacuum tank degasser.

Continue reading →

A client from Korean need us to re-design his present mud storage tank and existing shale shaker to be a complete mud recycling system.

See more :Drilling mud  systems

GN Drilling Mud system design as following:

• 1, About mud tanks capacity and numbers:

The mud system needs 2 tanks,1 recycling tank,1 storage tank. We design and make the recycling tank for you.
Recycling tank Dimensions: 8×2.2×1.8m , Capacity: 36m3
Storage tank: Your present container. We offer you drawing to redesign your container. It’s much easier to re-make your container to be a storage tank then to be a recycling tank.

• 2.    IS Mud pump included in one mud tank ?

No. Please review our quotation for all equipments for a total mud system.

• 4.    Is mud tank existed or will make newly?

• 5.    If it make newly, I wonder how it takes period

Answer: Recycling tank is customized for you, we will make the recycling tank newly, but the recycling tank and other equipments are manufactured by different workforce at the same time. So totally, so it only takes 25 days to make the total mud system for you.

• 6.    I ask full set last price including container Continue reading →

Drilling fluid(mud) is an important component in the drilling process. The drilling fluids(mud) performance very important functions in oil gas drilling,and HDD(Horizontal directional drillling).

Drilling fluids(mud) Function

• Remove cuttings from well

• Suspend and release cuttings

• Control formation pressures

• Seal permeable formations

• Maintain wellbore stability

• Cool, lubricate and support the bit and drilling assembly

• Transmit hydraulic energy to tools and bit

• Ensure adequate formation evaluation

• Control corrosion (in acceptable level)

• Facilitate cementing and completion

• Minimize impact on environment

Drilling fluids(mud) system function is for cleaning drilling mud,and recycling drilling fluids.

Drilling Fluid(mud) Types

There are several types of drilling fluids used depending on the drilling conditions encountered:

* Water-based muds are used most frequently. The base may be either:

o fresh water, or

o salt water.

* Oil-based muds. Continue reading →

Drilling fluids system for trenchless equipment /HDD applications from GN are cusomized,cost-effective,and reliable spare parts are guaranteed.

GN solids Control mud system is divided into three divisions now:

• Oil & Gas Drilling mud equipments.

• HDD (Trenchless) mud recycling system.

• Slurry separation and more.

The oil & Gas drilling fluids system is usually multi-tanks with explosion proof drilling mud equipments.

oil drilling mud system

The HDD (Trenchless) mud recycling system is usually small unit,signle-tank mud system.

Features of GN Trenchless mud equipment.

Fetures of GN HDD mud Equipments

• Customized System Type:From single tank mud system to multi-tanks system
• Effective Equipments integration:Complete drilling mud equipments from a single source-GN Factory.
• Cost-Effective Solution:China leading horizontal directional drilling mud system technology.

• Assured customer service:We can send our experienced engineers for installation,and training up customer engineers.
  

  Trencheless mud system

The small signle-tank system is made with multi-fuctions:Bentonite jet mixing system,mud treatment equipment, and mud tank for recycling and storage.

Learn more about trenchless rig drilling fluids system.

The torch unit is also called electric ignition device,which is used for igniting gas in oil gas drilling.It marches the mud gas separator in oil gas drilling.

Learn more:Electric Ignition Device

Drilling mud gas torch

Working procedure of drilling mud torch.

1. Have the flammable gas conveyed to the air intake of gas burner (torch) through the pipeline installed at the safe area.
2. Connect and start current transformation of electric ignition device and electric circuit of voltage amplification.
3. Open the liquefied gas pot and ignite fire-leading tube through operating electric ignite (ignition at first stage), or with the fire-leading gas valve of emptying gas directly opened, ignite fire-leading tube through electric igniter (ignition at first stage).
4. Open gas blown down valve and ignite the blown down gas through the flaming fire-leading tube (ignition at second stage).
5. Have the liquefied gas pot closed with fire-leading tube put out, letting the blown down flammable gas to freely burning.

Drilling mud gas drilling torch unit. for poor boy degasser.

An Indonesia clients ask us to contact Vermeer Beijing Manufacturer for HDD rig spare parts,they want to buy new HDD mud system from us,and want to replace some spare parts for their HDD Vemeer rig.

Vemeer China VBM Company,  is Balama VBM : Vermeer Beijing Manufacture Joint venture Vermeer USA with Balama China

HDD rig

As per our comunication before I want to inform below :
Now we have Vermeer HDD D130X150, this rig made from Vermeer Beijing Manufacture (VBM), joint venture vermeer and balama china, (www.balama.com). We use drill pipe : vermeer Firestick One Piece Drill Rods 88.90 mm x 6.09 meters.

I want to buy DCI Eclipse SST complate, but some of pieces equipment and tooling must be required for operation of the SST. Such as :
1. Non-magnetic housing for SST transmitter
2. Monel (non-magnetic drill rod) approximately 15 ft (3 m) long for use between the nonmag housing and the first drill rod. A second monel may be required if you are using a mud motor.
3. Mud Motor and Tricone Drill Head

Kindly you help me for check the spare parts and pricing in China by Vermeer Beijing Manufacturer?

HDD mud system and equipments are becoming a very important market for GN Solids Control, China  leading manufacturer  specializing  in complete line of  equipments for drilling mud system.GN Drilling mud equipments are widely used in oil & gas drilling,and HDD mud system.

HDD mud system

Australian HDD drilling company inquiry for mud system

:
Can you please supply me pricing on your HDD horizontal directional drilling mud tank systems.
I am looking for small units that will clean 130 gal and larger units to clean up to 1000 gal per minute.

Indonesia HDD drilling contractor for mud system:

My Company is Contractor Horizontal Directional Drilling(HDD).I Am interesting with MUD Cleaner ZQJ250×100B.Please quote me and send information about this product to my Email.

Nice to hear your voice in phone. Thankyou for your quotation. As per our inquiry, I want to order completed this Solid system. Here, I attached the system from Mud Tech. The system consist of, mud shale shaker, desander, desilter, mud tank, mixing system, generator set, hopper etc. I hope you have the equivalent product, with the same capasity, realibility and performance. But I dont want skid mounted, and the system can do disassembly.

I hope you can submitted to me your quotation that equivalent product and performance.

After two days discussion,the Indonesia clients are going to order a complete HDD mud system from us in next week.

Today,A client inquired us for Drilling rig 750 HP  Mud handling equipment

Drilling mud handling equipment

Mud gas separator (poor boy  degasser)

Capacity :  1.56 M3.

Mud Degasser handling gas in mud
1 EA. ZCQ1.5/5 Vacuum degasse
Type/size centrifugal pump: 2″X1.1/2″
Driven by electric motor
50 HZ.   –   22 KW.   –    380/660 V.

Drilling Mud system
Mud pumps
1 EA. Mud pump  –  SI PETRO.  –  CHINA.
3NB-500 mud pump
Max. flow rate: 4000 PSI.

2 EA. Mud Mixing pumps
Driven by motor : 73 HP.

1EA. Transfer pumps

SIZE : 2.1/2″ SHAFT. – 4″X3″X13″ CASING.
Driven by motor: 50 HP.

Mud tanks system
3 EA.  mud tankS
TOTAL VALUME : 167m3
DIMEN.: 12500×3200×3100mm

ACTIVE MUD TANK
Total capacity : 133 BBL.

Reserve
Total capacity  : 400 BBL.
W./MISSION PUMP 2500 4″X3″X13″ – 2.1/2″ SHAFT.

Sand trap
1 EA. sand pump
capacity : 40 BBL. Continue reading →