Aug 29

Oilfield drilling Poor boy degasser that removes air or gases (methane, H2S, CO2 and others) from drilling liquids. There are two generic types that work by both expanding the size of the gas bubbles entrained in the mud (by pulling a vacuum on the mud) and by increasing the surface area available to the mud so that bubbles escape (through the use of various cascading baffle plates). If the gas content in the mud is high, a mud gas separator or “poor boy degasser” is used, because it has a higher capacity than standard degassers and routes the evolved gases away from the rig to a flaring area complete with an ignition source.

State International Engineering can design and manufacture mud gas separators, either as standalone units or supplied with choke and kill manifolds.It is used before shale shakers.

Based upon your predicted operating conditions and your required gas handling capacity we will be able to calculate the optimal size of your mud gas separator. All our mud gas separators are supplied with a complete calculation package; this will include mechanical strength calculations, theoretical separation capacities and safe working pressures etc.

All State’s poor boy degassers are fabricated to ASME VIII div 1 or PD 5500. The vessels are then hydrostatically tested with a 3rd party classification society witness. Our mud gas separators are supplied with a product certificate and design review.

Poor boy degasser

Poor boy degasser

State International Engineering poor boy degasser are supplied with top quality temperature and pressure sensing equipment where requested. These instruments can provide local displays at the separator, a display at the choke and kill control system and give repeated signals for the drilling control system. State can also provide loop seal pressure monitors and alarms. All this can be achieved through an State Int. Eng. hazardous area certified, control system.

Oilfield drilling Poor Boy degasser is professional equipment to treat the gas invade mud. When the drilling mud result gas invade, the proportion of its weight and viscosity have a greater deviation not to meet the requirements of drilling. The serious situation is that would cause Chung well, and even blowout accident occurred, if not to treat it timely. ZYQ series Gas-liquid Separator combined with the (Company site: Solids Control System

Electric Ignition Device can be used to ensure the drilling process smooth. It is devided into the normal pressure gas-liquid separator and pressure auto-control gas-liquid separator, according to the pressure.Ga-Liquid Separator is your best choice to prevent drilling fluids invasion.

If you enjoyed this post, make sure you subscribe to my RSS feed!

written by GN solids Control \\ tags: , , ,

8 Pings to “Oilfield Drilling Poor boy degasser”

  1. oil gas drilling torch unit Says:

    [...] Drilling mud gas drilling torch unit. for poor boy degasser. [...]

  2. Oilfield Flare Ignitors Systems Says:

    [...] more about  Poor boy degasser ,GN oil gas drilling flare ignition [...]

  3. Mud Gas Separator Sizing & Design Says:

    [...] gas and returning the mud to the mud pits. Small amounts of entrained gas can then be handled by a vacuum-type degasser located in the mud pits. The mud/gas separator controls gas cutting during kick situations, during [...]

  4. Offshore drilling rig mud degasser Says:

    [...] model ZYQ1000 mud gas separator  or ZYQ1200 poor boy degasser is of interest to the vessel, please advise if a larger inlet can be fitted to these units IE  8” [...]

  5. Mud gas separator vent lines Says:

    [...] Hazardous Gas Threat – The separated gas is carried by vent lines to a remote location and flared. Fail-safe gas [...]

  6. How to evaluate a Mud gas separator Says:

    [...] gas separator also called poor boy degasser, Gus buster, which is designed to provide effective separation of the drilling mud and invaded gas from the [...]

  7. Flare stack/gas flare Says:

    [...] in oil and gas drilling sites. The pipe diameter of flare stack is usually 8” for GN ZYQ series poor boy degasser. flare [...]

  8. Poor boy degasser in stock Says:

    [...] poor boy degasser model in [...]


7 Responses to “Oilfield Drilling Poor boy degasser”

  1. 1. steve Says:

    You can get more information about separator at http://www.process-facility.com

  2. 2. satellite tv on pc Says:

    I totally love your blog! Thank you for the post, very informative. wty1d8

  3. 3. ron cothren Says:

    poorboy degasser operating psi is controlled by what

  4. 4. asme standards Says:

    I delight in, cause I found just what I was taking a look for. You’ve ended my four day lengthy hunt! God Bless you man. Have a nice day. Bye

  5. 5. Moore rlx Says:

    |

  6. 6. atlantic city escorts Says:

    I just could not go away your web site prior to suggesting that I really enjoyed the standard info a person provide on your guests?

    Is going to be back incessantly in order to check up on new posts

  7. 7. westchester escorts Says:

    Thanks in support of sharing such a fastidious idea, piece of
    writing is good, thats why i have read it fully

Leave a Reply