Last week GN solids control shipped a unit of decanter centrifuge and feeding pump to Europe. Our equipments can meet the requirement of the clients who need high quality and more strict operation status.

bowl decanter

The bowl decanter can meet the following features:

1 Electric motor and control panel are explosion proof and have ATEX certificate.

2 The decanter centrifuge can work both in 400V/50HZ and 440V/60HZ. When you finished the drilling operation in one site, you can only change pulley belts to use it in different electric ratings.

3 The control panel utilized in zone 1,exp standard is Eex deⅡBT6.

4 The centrifuge used in ATEX EX zone 2(CAT 3G), TEMP T3 hazardous area.

5 Erosion affected area to be protected with abrasion protection –Tungsten Carbide coated stainless steel parts.

6 Include a signal line, with equipment fitted for a local/remote switch and a signal stating to the remote locatation(SPDT contact) LOCAL status which shall block any remote functionality and a similar stating remote status which likewise shall block any local actions.

7 Nominal treating capacity is 40m3/h,actual treating capacity is 30m3/h.

8 The max rotary speed can reach 3200rpm in 60HZ.

9 Painting: NORSOK M-501

Continue reading →

Last week we shipped another set of decanter centrifuge to South America. GN solids control is a new star for South America market, there are several sets of centrifuge working in site in Colombia. Our improved high speed centrifuge GLW360x1250 has been proved in good performance in solids liquid separation.

solid liquid separation centrifuge

GN improved decanter centrifuge has the following features:

G-force 2035G, separation point 2~5μm, differential torque 4000N/m max, bowl speed( during working) 3200rpm, differential ratio 57:1.

Bowl

The bowl has a cylindrical/conical shape and rotates at a pre-set speed optimal for the application. The slurry rotates with a different scroll design or by modifying an existing scroll. Scroll pitch and single or multiple flight configurations are important design variables.

Scroll

The scroll rotates at a slightly different speed than the bowl and conveys the deposited solids toward the conical end of the bowl.

Materials of construction

GN solids control uses high-quality stainless steel for all wetted areas. Bowl and scroll castings are made from centrifugal cast high strength and corrosion resistant stainless steel.

Continue reading →

Coal Bed Methane (CBM) is natural gas contained primarily (about 90% -100%) of methane (CH4) found in coal seams. Methane is also the major component in petroleum natural gas (about 70% – 90%) that is widely used today. CBM is generated from the microbiological process or thermal process in the coal seam and recognized as one of the cleanest fossil fuels. Indonesia has one of the largest CBM reserves in the world with a potential 453 trillion cubic feet (“Tcf”), more than double the country’s natural gas reserves. The South Sumatra Basin, the largest CBM basin in Indonesia, is estimated to contain in-place resources of approximately 183 Tcf; and the Kutai Basin, the third largest CBM basin in Indonesia, is estimated to contain in-place resources of approximately 80 Tcf (SPE, 2004).

CBM shale shaker

GN has exported many sets of mud tank system to Indonesia for CBM project. The technique to exploit CBM is different with that applied to the fossil natural gas, while both share the common in terms of marketing and utilization. Simply, CBM is exploited by drilling shallow wells into coal seams, dewatering the seams, extracting the methane from the seams and finally compressing the methane.

When design the CBM mud tank system, you should consider the following points:

1 shale shaker inlet method, usually the CBM well is lower than oil drilling well, maybe they will not use overhead manifold, but they have a mud pit and a submersible slurry pump to shale shaker.

2 fine particles, CBM drilling may contain much fine particles, most of clients will use high speed centrifuge.

3 Mud tank height, it should be a little lower than oil well drilling mud tank system.

Continue reading →

Producing oil and natural gas wells occasionally requires major repairs or modifications, called “workovers.” Workover services are carried out with the same type of rig used to perform maintenance services, although the rig often is outfitted with specialized equipment including rotary drilling equipment, mud pumps, mud tanks and blowout preventers. A workover may last anywhere from a few days to several weeks to accomplish.

workover rig mud tank

Many oil wells rely on artificial lift methods to make the oil surface. Oil can be lifted by different techniques , which require specialized equipment operating under dificult conditions for long periods of times. These equipments are assigned to the wells as long as their use is economically rentable. Failures of these equipments over the time require maintenance services such as cleaning, reinstatement, stimulation and others, which are essential to the exploitation of the wells. These services are performed by workover rigs.

GN solids control provides related solids control equipments and consultant service for workover rig operation. The most common workover model clients may require is XJ550HP, 450HP, 350HP, 650HP. GN solids control owns standard design of solids control equipments for these workover rig models.

Continue reading →

Top 550HP workover rig manufacturers in the world

1 New Oil Rigs based in international market

They fabricate and manufacture custom oil and gas rigs for vertical and horizontal well drilling and oilfield work over service.  We have experience in customizing rigs for both desert and arctic service.  Rigs are from 450 to 3000hp and include carrier based, self-elevating, and box-on-box rigs.

550HP workover rig mud tank system

2 XQ PACIFIC GROUP CORPORATION

XQ Pacific Group Corporation is incorporated in Ontario province Canada by Canadian law on Jan 17, 2005. It is an integrated service group. Workover rig Products including Heavy-duty workover rig, special environment workover rig, Light-duty onshore workover rig, slant-well workover rig, except these, they also have onshore& offshore drilling rig, etc.

3 GN solids control design and manufacture mud tank system for workover rig and oil & gas drilling rig. We have a standard 550HP workover rig mud tank system, but we can make some changes according to client’s using habit and special requirement.

GN 550HP workover rig mud tank system including:

2 ea GNZS703 shale shaker

1 ea GNZJ703 mud cleaner

1ea GLW355x1250N decanter centrifuge for option

15HP mud agitator

Mechanical seal centrifugal pump

Container suitable mud tank for easy transportation

Continue reading →

Natural gas drilling rigs can be used not only to identify geologic reservoirs but also to create holes that allow the extraction of natural gas from those reservoirs. Primarily in onshore gas fields once a well has been drilled, the drilling rig will be moved off of the well and a service rig (a smaller rig) that is purpose-built for completions will be moved on to the well to get the well on line. This frees up the drilling rig to drill another hole and streamlines the operation as well as allowing for specialization of certain services, i.e., completions vs. drilling.

natural gas drilling mud system

Natural gas is a naturally occurring gas mixture consisting primarily of methane, typically with 0–20% higher hydrocarbons. It is found associated with other hydrocarbon fuel, in coal beds, as methane clathrates, and is an important fuel source and a major feedstock for fertilizers.

Hydraulic fracturing, or fracking, uses huge volumes of water, chemicals and sand injected into rock at high pressure to release natural gas. Its development has unleashed a natural gas boom in the US and around the world. US has developed such method to drill for natural gas.

GN solids control provide mud cleaning system for directional drilling and fracking for natural gas, we are thinking to design such mud system for US market. All the electric motors and control panels will use IECex certified or US motors.

To design a system, we need to clarify the following questions:

1 What kind of drilling you are doing？

2 What is your required active capacity of the mud pits？

3 What equipments you used before?　If you have no experience, we will provide our standard design.

Continue reading →

Chile has the world’s largest copper reserves and is also the largest producer and exporter of the metal. In 2011, Chile expects global copper output will reach 16.5 million tonnes, an increase of 345,000 tonnes over 2010. Of the 16.5 million tonnes of output, Chile expects to supply 5.7 million, roughly one-third of the total demand.

mining rig mud recycling system

Copper mining has played a significant role in the Chilean economy since at least 1825 when foreign investors were actively competing to control the country’s rich copper and silver deposits. By 1835, Chile was exporting 12,700 tonnes of copper per year, mostly to the United States. By 1860 copper accounted for fifty-five percent of the economy.

Mining rig drilling also needs mud recycling system, consider environment protection and drilling requirement. Since mining rig is usually very small, so the mud system should be portable and compact, the production cost will be lower than HDD and oil drilling.

Continue reading →

Last week we exported a mud mixing plant to Spain. Every year we design and manufactured hundreds of mud mixing plant for international clients, especially for developed countries, like UK, Australia, USA, New Zealand, Singapore, etc.

mud mixing plant to Spain

The mud mixing plant is with mud hopper, slurry pump, mud agitator, mud tank, control system, and the painting color can be customized. The mud tank dimension is designed by the active capacity clients required. And we should consider the container shipment when design, freight charge is one of the factor clients may care.

Except for skid-mounted mud mixing plant, we can also make it portable mud mixing plant, and connected with truck head for convenient transportation.

During shipment, we put mud hopper inside the tank by remove the Galvanized Steel Grating, and put the hand rail, stairs on top of the tank.

Except for mud mixing plant, we can also produce mud recycling system plant, including shaker tank, suction tank, reserve tank, water tank, trip tank, pill tank and related solids control equipment. We can also add dewatering unit if clients required.

Continue reading →

Shale shaker, mud cleaner, decanter centrifuge, centrifugal pump, mud agitator are basic and important equipments for land rig solids control system. GN solids control is specialist for these equipments, and we are trying to put them into mass production to improve the production ability and keep the quality stable.

1000HP land rig equipments for sale

This month we shiped 4 sets of 1000HP land rig equipments to Russia. After we came back from Moscow oil & gas exhibition 2011,we get many orders from this region.

If you have any inquiry of shale shaker, mud clenaer, desander, desilter , decanter centrifuge, centrifugal pump, mud agitator, pls contact GN solids control.

Solids control service include but not limit to a list of service regarding to oil & gas drilling, such as

• Data reporting
• custom developed software (compatible with operators statuatory reporting obligations)
• monitor mud use and loss
  

  solids control service company

• monitor gauge hole drilling
• monitor waste movements
• Drill cuttings project management
• cuttings skips logistics
• waste movements monitoring and reconciliation
• solids treatment and disposal
• Mud recovery (sludge gulper / liquid recovery unit / pressure washer)
• Pit cleaning (transfer pumps and pit cleaning squads)

Here is a list of solids control service companies in the world.

1 Baker Hughes Incorporated

Enhance drilling rig efficiency and improve fluid performance

Effectively removing solids from returned drilling fluid is vital to your drilling rig’s performance and, ultimately, the ability to achieve your drilling objectives. Having the right equipment to handle these solids is critical, if you want to enhance drilling rig efficiency and improve fluid performance.

2 Solids Control Services (SCS), specialises in the supply of high quality decanter-centrifuge based systems and associated contracting services, applicable to a broad spectrum of solids control and separation applications on a worldwide basis.

New and ever increasing environmental legislation increases the importance of employing efficient and reliable methods to meet waste reduction and minimisation targets.

Using SCS systems for the treatment of waste streams, whether from drilling operations or industrial processes, can render the constituents of those waste streams suitable for refuse, thereby reducing adverse environmental impact and the costs associated with waste disposal.

3 GN solids control just provide solids control equipments and technical support for solids control industry.

Continue reading →