Author Archives: GN solids Control

Drilling fluids Decanter Centrifuge in Mexico

GN exported our drilling fluids decanter centrifuge to Mexico, Except for traditional model decanter centrifuge, GNLW452S middle speed decanter centrifuge, GNLW363G high speed decanter centrifuge, We also have 4 new model drilling fluids decanter centrifuge.

drilling fluids decanter centrifuge

drilling fluids decanter centrifuge

GNLW452S is developed based on our traditional model LW450x1000, after improvement on the design and performance, now its bowl length reach 1100mm(100mm larger than previous one) ,actual treating capacity can reach 40m3/h, and max bowl speed can reach 2200rpm, with all other features of middle speed decanter centrifuge.

GNLW363G is developed from GLW355x1250 model, after improvement, the bowl diameter is 5mm larger and bowl length is 20mm larger than before. Now the actual treating capacity can reach 30m3/h, and the bowl speed can be choose by using various size pulleys. The max bowl speed it can make is 3900rpm. Different with other suppliers, GN showed the actual treating capacity( process rate) on the paper, not the nominal processing rate 40m3/h.

GN new model drilling fluids decanter centrifuge compared with MI-SWACO drilling fluids decanter centrifuge:

GNLW364VFD is similar and large than SWACO 518. The bowl size of 518 is 356 x 1422mm, the bowl size of GNLW364G is 356x1510mm, the bowl length is more than 518 centrifuge. And the centrifuge is precision-balanced for smooth operation over long periods at speed of 1800 to 3900rpm, generating centrifugal forces up to 3000G.

Continue reading

Geotechnical drilling equipments

Geotechnical drilling is drilling which is often related to the construction of a structure such as a building or an oil rig. It can be part of the construction process as well as part of the investigation process conducted on site before the structure is built.

drilling fluids processing system

drilling fluids processing system

 It includes drilling to remove rock and soil samples, along with drilling to evaluate soil stability and other topics of interest. As part of the construction process, geotechnical drilling includes drilling to prepare for foundations, caissons, and various supports. Drilling of this kind is overseen by an engineer who confirms the placement of the drill and makes sure that the drilling is conducted properly.

What is geotechnical investigation?

Before the construction starts it is good to know your conditions.Investigating the soil is a good way to map the challenges ahead.

Commonly used methods

Depending on ground conditions and required drilling depth, core drilling or RC drilling can be the methods of choice. SPT or Standard Penetration Tests are performed by recording the number of hammer blows needed to drive up a sample tube to certain depth in to the ground. This would indicate the relative density of the soil.

 How to process the mud produced by Geotechnical drilling?

The mud produced by Geotechnical drilling is very less, it depends on the length and the core diameter. Usually its treating capacity is only 5m3/h or less, but it can not be discharge away directly to the environment because of strict environment protection regulation. If you have such problem, pls contact with GN solids control.

Continue reading

Offshore drilling waste management

When water-based muds (WBMs) were used, only limited environmental harm was likely to occur, but when operators employed oil-based muds (OBMs) on deeper sections of wells, the resulting cuttings piles created impaired zones beneath and adjacent to the platforms. So it is necessary to process drilling waste by GN drilling waste management system.

offshore drilling waste manaegement

offshore drilling waste manaegement

Many offshore rigs do not process the drilling waste or even drilling mud at site, because there are professional facilities who can recycle the drilling mud and process the drilling waste. Then the rig can re-use the recycled drilling mud. Unlike onshore drilling rigs, there are complete solids control systems in onshore drilling site.

The drilling waste produced by onshore drilling are mainly drilling cuttings and less water, which can be transferred by screw conveyor to hi-G shaker or vertical cutting dryer for further process.

The drilling waste produced by offshore drilling usually is not produced by solids control equipments, they are collected by containers then transport to the drilling waste management facilities for process. Firstly they are pumped to shale shaker( drying shaker), then desander, desilter cone, the clean fluids can be processed by decanter centrifuge directly. The cuttings are transferred to vertical cutting dryer, then to decanter centrifuge, the clean fluids are collected and re-used in offshore drilling rig.

Continue reading

Hi-G dryer for Waste Management

GN new products hi-G dryer GNZS85-3 is designed to replace the old model hi-G dryer GNZS63-4. GN Hi-G dryer shaker is with long shaker deck big capacity which is used for waste management to treat the drilling cuttings from the primary solids control equipments, like shale shaker, desander, desilter to dry the solids for transportation, and make the fluids easier for future treatment. To know more info of primary solids control equipments, pls check GN website.

GN hi-G dryer

GN hi-G dryer

What is the features of GNZS853 compared with GNZS63-4?

1 Even it is 3 –panel hi-G dryer, its screen area is larger than 4-panel hi-G dryer. The larger the screen area is, the dryer the cutting is. Total deck screen length is 2550mm, the total deck screen length of GNZS63-4 is 2520mm. Total screen area of GNZS85-3 is 3.2m2, but the total screen area of GNZS63-4 is only 3.15m2. And GNZS85-3’s screen area and total deck length is larger than Derrick 4-panle shale shaker/mud cleaner.

So 4-panel shaker is not must be better than 3-panel shaker.

2 3-panel shaker screen can enlarge the effective screen area, the waste screen area is less compared with 4 screen panel. It can improve the performance of hi-G dryer.

3 Mechanical deck adjustable while operation for reliable performance.

Continue reading

Mud motor recycler for HDD rig

The majority of Mud Motor use is in the drilling of Directional Holes. Many of our HDD contractor clients asked if we have mud motor for sale, they prefer a complete solution for triplex mud pump, mud motor, recycler, mixing unit, GN can provide mud recycler and mixing unit as a package.

HDD mud motor recycler

HDD mud motor recycler

Mud motor also called Drilling Motor refers to a Progressive Cavity Positive Displacement Pump placed in the Drill string to provide additional power to the bit while drilling. The PCPD Pump uses Drilling Fluid to create eccentric motion in the power section of the motor which is transferred as concentric power to the drill bit. The Mud Motor uses different rotor and stator configurations to provide optimum performance for the desired drilling operation, typically increasing the number of lobes and length of power assembly for greater horsepower. In certain applications, compressed air, or other gas, can be used for Mud Motor input power. Normal rotation of the bit while using a Mud Motor can be from 60 rpm, to over 100 rpm.

GN mud recycler and mixing unit can match with Ditch Witch HDD rig and Vermeer rig according to their required mud flow capacity. The recycled drilling fluids by GN mud recycler and mixing unit are provided to mud motor for charging.

Mud motors are powered by drilling fluid ,the fluid consists of water mixed with bentonite or polymer additives designed to match various soil conditions. The fluid is pumped down through the drill string to the downhole motor, which converts the flow to rotary speed and torque.

Continue reading

Mining exploration drilling mud separation equipments

Mining exploration is the process of finding ore to mine. Mining exploration methods vary at different stages of the process depending on size of the area being explored, as well as the density and type of information sought.

Diamond drilling is a kind of mining exploration drilling, used in the mining industry to probe the contents of known ore deposits and potential sites. Early diamond drilling opened up many new areas for mining, and was related to a boom in mining exploration in remote locations. Before the invention of the portable diamond drill, most mineral prospecting was limited to finding outcrops at the surface and hand digging.

drilling mud separation equipments

drilling mud separation equipments

 

At the 1st stage of mining exploration, sometimes you only drill a small hole like 100~150mm, not so deep. Because of strict regulation of environment protection, you will have to process the drilling mud flowed from the hole. GN solids control can provide a proper solution for your drilling effluents.

GN mini shale shaker GNZS752 is a good solution for such small treating capacity drilling, its nominal treating capacity is 35m3/h at API60 mesh screen. If you need 10~15m3/h process rate, you can use API100 mesh screen. They can perfectly meet your requirement. You do not need a hydrocyclone because the treating capacity is too small, fine mesh screen can finish the job of hydrocyclone.

Continue reading

Directional drilling machines for sale

Directional drilling (DD) is seen as a marriage of conventional road boring and the directional drilling of oil wells.

It is also known as directional boring, horizontal drilling, slant drilling, or deviated drilling, is a method of trenchless technology that involves drilling a non-vertical well or borehole. It can be broken down into three main groups: Oilfield Directional Drilling, Utility Installation Directional Drilling (or H.D.D. or Horizontal Directional Drilling) Directional boring, and in-seam directional drilling to extract coal bed methane.

directional drilling machine

directional drilling machine

Many directional boring machines also use a drilling fluid or slurry called mud. Other machines use foam or air, or both. The drilling fluid or mud is composed of bentonite clay and water with additives for enhancing performance. The higher-pressure jet of fluid is used in soft ground to cut through the soil. The cuttings then get suspended in the fluid. As more fluid is pumped down into the hole, the cuttings are brought back up to surface where they settle in a pit or are removed mechanically.
GN solids control equipments are used to handle the drilling mud with cuttings, to separate the big cutting out of the drilling fluids, so that the mud can be used for drilling again.

For oilfield directional drilling, we provide a complete solids control system, including 4-class cleaning of mud, shale shaker – desander – desilter – centrifuge, sometimes vacuum degasser is applied.

Continue reading

Directional boring equipments in Brazil

Directional boring has evolved steadily over the last 20 years and is now the preferred method on many installations due to its low cost and low impact on surroundings.

GN solids control will ship a complete directional boring mud recycling system to Brazil for application. The directional boring equipments we produce including HDD mud system, shale shaker, mini mud cleaner, desander, mixing pump, jet mud mixer, etc.

directional boring mud system

directional boring mud system

Directional boring, commonly called horizontal directional drilling or HDD, is a method of installing underground pipes and conduits along a prescribed bore path from the surface, with minimal impact to the surrounding area.

GN direction boring equipments application

The process is used for installing telecommunications & power cable conduits, water lines, sewer lines, gas lines, oil lines, product pipelines and environmental remediation casings. It is used for crossing waterways, roadways, shore approaches, congested areas, environmentally sensitive areas and any area where other methods are more expensive.

They have been used in Australia, Indonesia, Brazil, France, Singapore, application including HDD, diamond drilling, water well drilling. Our directional boring equipments have been showed in Australia no-dig show, and it is approved by many HDD operators. We will take another set of HDD mud cleaning system in CIPPE ( world’s largest oil show) held in Beijing, if you want to check its performance, pls visit us in CIPPE.

Continue reading

BEM Mini Mud cleaner GNPJ752

GN new designed BEM mini mud cleaner, it is special for small handling capacity mud system, such as HDD(horizontal directional drilling), water well drilling, desanding unit and small workover rig mud tank system.

GN BEM mini mud cleaner GNPJ752 Features:

mini mud cleaner

mini mud cleaner

1 with 2 panel shaker screens at API 60~80 mesh size, total screen area 1.35m2

2 vibration motion: BEM( balanced elliptical motion), which is the lastest technology, BEM shaker’s treating effect is better than traditional linear motion shaker.

3 With 4” desilter cone to separate 20 microns solids, cone qty is optional, 4pcs, 6pcs, 8pcs, 12pcs, depends on the handling capacity you required.

Or with 10” desander cone to separate 75 microns solids, cone qty is optional, 1pc or 2pcs, depends on treating capacity.

4 2ea Italy Oli vibration motor 0.7HP

5 Pretentioned shaker screens are locked by wedge, which is very convenient to replace shaker screen

Continue reading

2-Panel Mini shale shaker for sale

GN solids control developed a new product- mini shale shaker, model GNZS752. It can meet the requirement for the clients who do not need so large treating capacity, but want to find an economic way to separate big solids from the drilling fluids.

mini shale shaker

mini shale shaker

GNZS752 shale shaker with unit treating capacity 264gpm, 2 screen panels with total screen area 1.35m2, G-force 6.3G adjustable, total power of this shaker is only 1.0KW, and total weight 800 kgs. Based on these parameters, we called it mini shale shaker.

This linear motion shale shaker GNZS752 can be widely used in HDD, water well drilling , shadow drilling and other drillings which need small treating capacity. After the new mini shaker is developed, there are many clients showed their interests. Before they have to use bigger shaker 2-panel GNZS852 or even 3-panel GNZS703. These shakers can treat the drilling mud better because of their large treating capacity, but it is a waste of money.

Comparison between GNZS752 and Brandt mini Cobra 2-panel shaker

Motor power: Brandt mini Cobra is 1.1KW x 2 , GN mini shaker is 0.5KW x 2

Screen area: Brandt mini Cobra is 1.6m2, GN mini shaker is 1.35m2

Screen panel: Both of them are 2 panel

Screen type: pretension, repairable

Continue reading