Last week, GN Solids Control provided three well -known drilling companies with three anti -splash drilling liquid shale shakers and a mud cleaner. Meet the requirements for environmental protection treatment of mud.

1. GN drilling liquid shale shaker

     GN shale shaker use OLI or Martin motor in Italy, and Electric components use Siemens Schneid. The negative load design, the overall heat treatment of the sieve box, the maximum vibration strength can reach 8.0g, which meets the use of various operating conditions. Shale shaker is mainly used for first -class separation, separated solid particles with more than 100um, and at the same time, the number of sieved particles can be adjusted by regulating the number of mesons of the shale shaker. The assignor allocates the mud to the two shale shakers at the same time to increase the processing amount. The shale shaker of this supply has an anti -splash design to effectively prevent the material splashing, reduce the waste of mud, and protect the on -site operating environment and meet the needs of the owner.

2. GN mud cleaners

     The GN mud cleaners is a tight processing device. It is equipped with a sand removal and mud device on the shale shaker to form a compact integrated module. Compared with the use of shale shakers, sand removal and mud device, it saves a lot Use space and facilitate transportation. The mud cleaning device provided to customers is equipped with a 10-inch sand removal and a 4-inch mud removal flow. The sand removal can be separated from 40-60um solid particles. The above solid particles provide guarantee for subsequent mud recovery or the use of centrifuge.

      GN Solids Control is a professional solid liquid separation processing equipment supplier. The main parts of its production such as shale shaker, mud cleaners, centrifugal pumps, and snail centrifugal machines are widely used in drilling solution treatment. GN Solids Control also provides other solid -liquid separation devices in addition to providing shale shakers and mud cleaners. If you have this need, you are welcome to contact GN Solids Control.

Last week, GN Solids Control provided a sludge pit to clean the vacuum pump and the residential snail centrifuge for a certain Asian customer for sludge dehydration treatment.

GN Solids Control Solid Vacuum Pump can transport materials with high transportation content and high density, such as pot mud, drilling rock crumbs, refinery waste, oil sludge treatment, etc. The valves, control boxes and other components of the GN mini solid vacuum pump are driven by pneumatic driving, which is safe and reliable in a non -explosion -proof environment. The vacuum pump provided to customers this time is used for the transportation of sludge in the sludge pit and replaced the excavators for conventional use. This can maintain the operating environment of the scene, reduce pollution, and improve efficiency.

The sludge drawn out by the GN vacuum pump is added with water and entered the rescuer of the Decanter Centrifuge for dehydration. It can get clean water and relatively dry sludge. This sludge can be directly treated in the next step. The horizontal screw pusher of the horizontal snail uses double -phase stainless steel 2205, which improves wear resistance and service life. The outlets are protected by carbonized wear -resistant alloy sets, and the continuous operation and use capabilities are stronger. GN Solids Control cooperates closely with world -renowned suppliers. For example, we use SKF brands in the main bearing, and we use Electric components to use Siemens, Schneider, ABB and other brands. Ensure the experience of the customer and meet the needs of customers.

If you are in the need for solid -liquid separation equipment or transportation equipment, please contact the GN Solids Control.

In the oil industry, soil pollution is mainly derived from three parts of the landing crude oil and oil -containing sludge, drilling waste mud, and waste residue generated by oil -containing sludge in oil and gas production and processing. A large amount of pollution soil is generated. The GN Solids Control Environmental R & D team adopts the treatment of soil thermal leaching+ centrifugal separation for different types of oil -containing soil. It has the characteristics of large processing volume and significant effects. While ensuring the treatment of the standard Treatment has greatly reduced the total amount of oil -containing and reduced the cost of completely harmless treatment.

Last week, GN Solids Control provided a set of oil -free soil -free scrubbing equipment for Middle East customers. The main configuration is as follows:

Mine shale shaker module

Because the materials that need to be processed may contain large sundries such as large rocks and plastic breaking plastic, first use the crown energy mining shale shaker for rough sieve, eliminating these foreign objects that may affect the crushing effect or cause the crusher failure.

 Soil leaching module

The materials after the mining shaker were transmitted to the crusher through the spiral conveyor, and the feed port or the outlet is equipped with a strong magnet in the spiral conveyor to remove the iron impurities and protect the crusher. The crusher crushes and screens the large particles in the oil -containing soil, so that the solid particles in the material are not greater than 70mm.

After the material is crushed, the material is provided to the premature jar through the vacuum pump.

The material of the vibration sieve is transmitted to the two -phase horizontal decanter centrifuge to separate the solid fluid through the screw pump. Separate, so as to obtain pure oil and water and store them in the oil compartment and waterfront, respectively.

Chemical medicine module

During the work of the entire system, in order to achieve a better separation effect, special chemical agents need to be added to premature tanks, vibration sieve tanks or centrifuge imports to improve the separation effect of the equipment.

If you are related to the technology or related equipment in soil -cleaning, please contact GN Solids Control.

The oil -containing sludge treatment system produced by GN SOLIDS Control is mainly used to handle the mud from the drilling platform, refinery and oil tank at the bottom of the oil. It is designed for processing high viscosity and high -quality solid amounts of mud. After the GN oil -content sludge treatment system is treated, it can be obtained from three products: oil, water and solid.

Last week, GN Solids Control provided overseas project customers with a complete set of oil -containing processing equipment. The main configuration included:

1. Material pumping vacuum pump module

This module mainly includes air compressors, gas tanks and vacuum pumps. The GN vacuum pump is a pump with air as the power source. The air compressor in the module generates the power to provide power to the vacuum pump through the air tank. The vacuum pump can be used to transport drilling waste, industrial slurry, chemical powder, building aggregate, sludge, kitchen waste and other materials. Its powerful transportation capabilities make it perform well in terms of mud transportation and can complete the transportation task well. Provide a guarantee for the following premixing hot washing module.

2. Premier hot cleaning module

Due to the high solid content, large viscosity, and poor liquidity that customers need to deal with, GN Solids Control has set up premium hot washing modules, mixed with tanks with mixers to prevent the sludge from precipitation. At the same time, the mixed tank has heating function. By stirring heating and dilution, the material has better liquidity, so that the vibration screening module can be transported through the submersible pump.

3. Shale Shaker screening module

The Shale Shaker produced by GN SOLIDS Control can separate a larger solid particles from the diluted clay, creating more suitable conditions for the separation of the snail centrifugal. GN SOLIDS Control can also produce Shaker Screen at the same time, and the screen network meets the API RP 13C standard.

4. The separation module of the solid liquid solid liquid in the reclining snail

After the shacking of the Shale Shaker, the sludge pump was split into the Decanter Centrifuge for two phases. The solid oil content after isolated is ≤5%, and the liquid phase is mainly oil and water. The solid phase can be treated in the next step, and the liquid phase is transported to the disc separator through the screw pump.

The oil -containing sludge treatment system designed by GN SOLIDS Control is of great significance for waste treatment. It can be used to reduce quantitative treatment and recycle a large amount of oil. Energy -saving and emission reduction, waste use, and efficient recycling, in line with the global trend of the global environmental protection industry.

If you have any need for oil -containing sludge treatment equipment and schemes, please contact GN Solids Control.

Recently, in three months, GN completed the project of 5 sets of drilling oil-based mud non-landing complete sets of equipment exported to Africa. The customer arranged for a third-party inspection DNV to conduct factory testing and equipment acceptance of the product. The 5 sets of drilling oil-based mud non-falling equipment have passed the third-party acceptance of the customer.

The 5 sets of drilling rig mud non-falling equipment mainly include the following equipment:

1. 5 sets of vertical cuttings dryer and skid-mounted lifting bracket

   The core equipment for drying and processing of oil-based cuttings that do not fall to the ground, its model is GNCD930G. It can meet the requirements of large-scale 2000HP (80 type drilling rig) oil-based cuttings without falling to the ground.

2. 10 sets of decanter centrifuges and skid-mounted brackets

   Among them, 5 sets of decanter centrifuges are used for the customer’s drilling rig solid control mud treatment, and the other 5 sets of decanter centrifuges are used for the separation of fine particles of drilling fluid discharged from the supporting dryer, so as to meet the reuse of oil-based mud that does not fall to the ground. This time the customer purchased GN’s best-selling model: GNLW363D, including 5 power frequency centrifuges and 5 variable frequency centrifuges.

3. Auxiliary equipment for drilling oil-based mud without landing

    Auxiliary equipment includes 40 GNSC series screw conveyors, some of which are used to feed the dryer, and some of the screw conveyors are used to convey the slag material to the centrifuge and the dryer. The screw conveyor is also equipped with a mechanical speed regulation function and an electric control start control cabinet. In addition, the auxiliary equipment purchased by the customer also includes 15 screw pumps, of which 5 are used to flush the cuttings dryer and 10 are used to feed the decanter centrifuge.

The user of this project is a large local oil development company with its own oil field and drilling team, as well as a mud service company. Working with GN Solids Control since ten years ago, there is a business collaboration with GN every year. This time, the purchase of 5 sets of 2000HP large-scale drilling rigs solids control centrifuges and oil-based mud non-drop processing equipment is a continuous trust and recognition of GN products and services. GN will also create value for customers with high-quality products, reasonable prices, and timely and professional services.

Recently, GN Solids Control provided African customers with 1500HP oil drilling rig solids control equipment, mainly including 3 sets of drilling fluid shaker, 1 set of drilling fluid cleaner, one drilling fluid high-speed centrifuge and one drilling fluid medium-speed centrifuge.

1. GN drilling fluid shale shaker

GN shale shaker uses Italian OLI or American Martin motor, and Siemens Schneider is used for electrical components. Heavy-duty design, the overall heat treatment of the screen box, the vibration intensity can reach 8.0G, which can meet the use of various working conditions. The shale shaker is mainly used for first-level screening to separate solid particles above 100um. At the same time, the size of the screened particles can be adjusted by adjusting the mesh of the shale shaker. At the same time, it can be made into a double screen according to customer requirements. The distributor distributes the mud to two shale shakers for simultaneous processing, increasing the processing capacity.

2. GN mud cleaner

The GN Slurry Cleaner is a compact treatment unit that incorporates a desander and desilter on the shaker to form a compact all-in-one module that saves a lot of money compared to using the shaker, desander and desilter alone Use space and facilitate transportation. The mud cleaner provided to customers is equipped with a 10-inch desilting cyclone and a 4-inch desilting cyclone. The desilting cyclone can separate solid particles above 40-60um, and the desilting cyclone can separate 20-40um. The above solid particles provide guarantee for subsequent mud recovery and centrifuge use.

3. GN Solids Control Centrifuge

     GN Solids Control decanter centrifuge are widely used for drilling fluid control and barite recovery. The price of drilling fluid is very expensive, because it usually needs to add chemicals to make it have a certain specific gravity and viscosity before it can be reused, so it is very important to recover more drilling fluid. GN solids control centrifuges process drilling fluid under the action of high speed and high gravity, so that the drilling fluid can be separated from solid and liquid, more drilling fluid can be recovered, and useless solid phase can be separated at the same time, which saves a lot of cost and improves efficiency. GN Solids Control centrifuges are available in a variety of sizes including 14″, 18″ and 22″. GN Solids Control centrifuges are used worldwide.

GN Solids Control has been committed to the design and equipment manufacturing of solid-liquid separation processing systems for many years. Since its establishment, it has reached long-term cooperative relations with many well-known drilling companies, providing various solid-liquid separation processing equipment for domestic and foreign customers every year with quality and quantity, and also provides complete sets of petroleum solids control systems. If you have any questions or needs about solids control equipment, you are welcome to call.

GN Solids Control has recently produced a batch of miniature solids vacuum pumps and miniature vibrating screens for sale to customers in South America. GN Solids Control not only produces solid-liquid separation equipment, but also produces matching conveying or liquid supply equipment, such as decanter centrifuges, and can also supply matching submerged slurry pumps or screw pumps for slurry supply. GN Solids Control vibrating screen can be supplied with GN centrifugal sand pump or vacuum pump. That is to say, GN Solids Control can provide a complete processing solution and a complete set of processing equipment to meet the needs of customers.

When it comes to shale shaker, GN Solids Control produces different types of shale shaker with different capacities, such as GNZS752 vibrating screen, with a capacity of 40m³/h; GNZS703 vibrating screen, with a capacity of 120m³/h; GNZS594 vibrating screen, with a capacity of 140m³/h; It can also produce double-layer vibrating screen GNZS706, with two layers up and down, each layer has 3 screens, which has a larger processing capacity and better processing effect. With the continuous development and innovation of technology, GN has launched a new mine vibrating screen for a wider range of fields. The vibrating screen produced by GN Solids Control uses imported motors, and the explosion-proof electronic control is equipped with Siemens Schneider and other electrical components. Use a pre-tensioned composite frame screen with a quick-release ratchet tool for easy screen replacement and long service life. The screen box is heat treated as a whole, and the bottom frame of the screen box is made of stainless steel, which has strong corrosion resistance and long service life. The angle of the screen box is adjusted synchronously on one side, which can be adjusted without stopping the screen box, and the operation is stable. The micro vibrating screen supplied to South American customers is the GNZS752 vibrating screen mentioned above, with a processing capacity of 40m³/h, compact structure, occupying The land area is small and economical.

About GN Solids Control vacuum pump, it is a pneumatic pump powered by air, which can be used to transport mine tailings, drilling waste, industrial slurry, chemical powder, construction aggregate, sludge, kitchen waste and other materials. GN Solids Control vacuum pumps are available in a variety of models including the GNSP-40B, GNSP-20B, GNSP-10B and GNSP-05B.

The vacuum pump model supplied to customers in South America this time is GNSP-05B. Its unique structural design enables it to work in harsh environments with low maintenance rate, and can transport solid, liquid or solid-liquid mixture and high specific gravity materials with good fluidity at high speed. Its working principle is that the high-efficiency Venturi device generates up to 25 inches of HG vacuum to suck the material under strong airflow. It is a pure pneumatic device and meets various explosion-proof requirements.

If you have any needs for solid-liquid separation equipment or distribution equipment, you are welcome to call GN Solids Control.

With the increasing difficulty of oil drilling development, more and more oil-based muds are used in drilling, but oil-containing drilling cuttings will be generated during the use of oil-based muds, which will cause great harm to the environment. Most countries in the world have strict restrictions on the discharge standards of oily drill cuttings. The cuttings dryer, centrifuge, screw conveyor and screw pump sold to customers in the Middle East will be used in the treatment of oil-based drilling mud to meet customer requirements.

1. GN Solids Control oil-based vertical cuttings dryer

The cuttings dryer uses the centrifugal force generated by mechanical rotation to realize the separation of solid-liquid mixture, and can recover the liquid phase in the cuttings. Drill cuttings pass through the feeding port and enter the space between the screen basket and the screw through the distribution plate. The rotating speed of the GN cuttings dryer is up to 900RPM and the separation factor is 420G. Under the action of centrifugal force, the liquid phase and small particles (centrifugal liquid) pass through the material layer, pass through the screen basket, and flow along the upper cover into the upper part of the machine base. The solid part of the drill cuttings is kept inside the screen basket, because there is a speed difference between the rotor scraper and the screen basket, the rotor scraper will remove the drill cuttings from the screen. The screen basket is scraped off and pushed to the bottom of the screen basket, so that the dehydrated drill cuttings are discharged into the collecting funnel under the machine or the bottom screw conveyor.

2. Waste treatment decanter centrifuge

The decanter centrifuge can further process the liquid phase separated by the cuttings dryer to reduce the density, so that the oil-based mud can be reused. The finishing of the GN Solids Control centrifuge is all processed by numerical control equipment, with high processing precision and good consistency. After the main rotor parts are processed by high-precision CNC equipment, the centrifuge goes through three dynamic balancing processes, including the 1800RPM medium-speed dynamic balance of the main rotor components, the high-speed dynamic balance of the actual working speed of the screw rotor, and the overall dynamic balance to ensure centrifugal The machine runs stably under high-speed conditions.

3. Screw conveyor

Screw conveyors are widely used in the transportation of solid waste in the treatment of drilling waste mud. The GN Solids Control screw conveyor has a support frame, which better protects the motor reducer, and at the same time improves the rigidity of the conveyor to meet the installation requirements of different working conditions. The upper cover of the screw conveyor can be protected by a detachable sealing plate or steel grating to improve the safety of use. The screw conveyors supplied to customers are mainly used for conveying cuttings processed by drilling cuttings dryer and cuttings processed by centrifuge.

4. Screw pump

The requirement of the centrifuge for the liquid supply pump is that the liquid supply is stable, and the screw pump has a stable liquid supply and can be metered, which is exactly matched to the use of the centrifuge. The icing on the cake for centrifuge processing.

If you have any questions about oil-based cuttings handling, you are welcome to consult GN Solids Control.

GN Solids Control is a manufacturer of drilling mud solids control equipment, of which Africa is one of GN’s main markets, especially with the high oil price this year, the African market is becoming more and more important.

Last week, GN Solids Control delivered a batch of drilling mud solids control centrifuges to an African drilling rig contractor. Centrifuge is the key processing equipment for solid phase control of drilling mud. Usually, after the drilling mud is returned from the drilling rig, the harmful air is removed by the liquid-gas separator, and then sent to the shale shaker, and then further removed by the desander or desilter. The pellets are finally sent to a decanter centrifuge.

The GN Solids Control decanter centrifuge can remove solid particles larger than 2-5 microns, no matter light gravity drilling mud or heavy gravity drilling mud, the rotor and the augers operate at different speeds to realize the solid phase control of the drilling fluid. GN decanters can also run at low speed to recover barite from drilling mud.

If sorted by drum diameter, GN Solids Control decanters are available in 220mm, 360mm, 450mm, 550mm and 760mm models. The rotating shares of all decanter centrifuges are centrifugally cast, the solid discharge port is protected by a tungsten carbide alloy sleeve, and the screw pusher is inlaid with tungsten carbide hard alloy sheets, which are more wear-resistant and have a longer service life and have been repaired and replaced.

This project GN Solids Control provides 6 sets of 360mm diameter decanter centrifuges, all of which are controlled by frequency conversion cabinets and fixed by HMI touch screen, which can easily change the operating parameters such as speed and differential speed. The centrifuge is fixed with a temperature sensor and a vibration sensor to monitor the operation of the two main bearings, which can ensure the normal operation of the equipment without overheating and the abnormal vibration of the entire rotating assembly.

GN Solids Control has been committed to the design and equipment manufacturing of solid-liquid separation processing systems for many years. Since its establishment, GN Solids Control has reached long-term cooperative relations with many well-known drilling companies, providing customers with various solid-liquid separation and treatment equipment with high quality and quantity every year.

Last week, a well-known petrochemical company purchased two sets of trenchless HDD mud purification and treatment systems.

One of them is a 240m3/h (1000GPM) trenchless mud purification system, including:

a. 2 shale shaker GNZS703F

b. 1 set of mud cleaner GNZS70F-2S12N

c. 1 large drum dewatering decanter centrifuge GNLW554EP-VFD

d. 4 sets of mud tanks

e. 1 set of jet mixing device

The other is a 120m3/h (500GPM) trenchless mud purification system, including:

a. 1 shale shaker GNZS703F

b. 1 set of mud cleaner GNZS70F-1S8N

c, 1 large drum dewatering centrifuge GNLW452D

d. 2 sets of mud tanks

e. 1 set of jet mixing device

GN Solids Control trenchless mud purification systems have the following features:

1. The shaker motor adopts Italian brand motor or American brand motor

2. The cyclone is made of 100% high-quality polyurethane and has a long service life

3. The centrifuge pusher is made of duplex stainless steel 2205 or 2304, and the discharge port is protected by a tungsten carbide wear-resistant alloy sleeve, which has a long service life

4. The centrifugal pumps in the jet device all use mechanical seals, which have a long service life and are easy to maintain.

5. Adopt Japanese Kansai brand epoxy zinc-rich marine heavy anti-corrosion paint

6. The multi-functional integrated design can meet the needs of mud purification and recycling, mixing and storage.

If you have any requirements for solid-liquid separation equipment or need consultation, please contact us for consultation.