GN Solids is a professional oifield drilling mud vacuum degasser manufacturer and supplier in China oil drilling mud solids control industry. As the pioneer in this industry, GN Solids is capable of providing customers with series products ,such as oil & gas drilling fluid solids control equipment, drilling decanter centrifuge, drilling waste management equipment and drilling security equipment.

Application of drilling mud vacuum degasser

To recomve invading gas from drilling mud, it is necessary to install a vacuum degasser. So that the invading gases may not impact mud properties. This invading gases can lead to risks and affect the lifespan of solids control equipment.

Vacuum degasser is a special-purpose oil drilling mud solids control equipment and a new type one for the drilling fluids system. Drilling mud vacuum degasser can get rid of various gases invading drilling quickly. Drilling mud vacuum degasser is very important for keeping mud gravity, stabilizing mud viscosity and reducing drilling cost. At the same time, drilling mud vacuum degasser can be used as a heavy-power mud agitator and supported applicable to all types of drilling mud purification system. The drilling mud vacuum degasser design of the structure is scientific and rational. So we are able to achieve an effective gas-liquid separation, filter out impurities and to ensure that the exhaust pipe is always smooth.

Continue reading →

The shale shaker is the first stage of solids control equipment in drilling mud purification system. It can remove cuttings above 75 μm brought from the drilling well to leave the liquid with smaller particles into the tanks below, which will flow into next grade solids control equipment for further treatment.

The economy of GN Solids Linear Motion Drilling Mud Shale Shaker

GN Solids drilling fluid linear motion shale shaker is especially effective while drilling top-hole sections where heavy and high-volume solids are usually encountered. In these intervals, drilling shale shakers may generate powerful G-forces and its effective vibrating motion can quickly remove the dense solids from screens and particles from wells.

Continue reading →

GN Solids is professional manufacturer for complete sets of drilling mud separation and recycling equipment. The conventional equipment like shale shaker, mud cleaner, desander, desilter, vacuum degasser, decanter centrifuge, mud agitator, mud gun, centrifugal pump, screw pump, etc. Here, let’s learn more about desander and desilter.

1. The general installation type and function of desander and desilter

Desander and desilter are solids control equipment with a set of hydrocyclones that separate sand and silt from the drilling mud used on drilling rigs.

They can be installed separately: Desander is installed on top of the mud tank following shale shaker and vacuum degasser, but before the desilter. Desilter is installed on top of the mud tank following Desander. They also can be installed completely: in this case, they are installed on one deck shaker and called mud cleaner or mud conditioner.

Desander removes the abrasive solids from drilling mud which cannot be removed by shale shakers. Normally the solids diameter for desander to be separated would be 45~74μm, and 15~44μm for desilter

Continue reading →

GN Solids is professional solids control equipment manufacturer. We can offer shale shaker, mud cleaner, de-sander, de-silter, decanter centrifuge, centrifugal pump, mud agitator, mud tanks etc. Regarding shale shaker, shaker screen is the most important spare parts. The shaker screen should be chosen by mud engineer who is in charge of test the property of drilling mud.

Continue reading →

On oil drilling rig site, Hi-G dryer shaker and double deck shaker is widely used for drilling cuttings treatment and recycling. They are both linear motion shale shaker. Some customer do not know the difference of Double deck shale shaker and High-G dryer shaker. As world top solids control and waste management equipment manufacturer, GN Solids can tell you the difference of the 2 types of shale shaker and choose the suitable model for your drilling rig.

Hi-G Dryer Shaker ( recommended model GNZS594, linear motion)

Compared with traditional shale shaker, this model with a Higher G force, can get better vibration screen separation. This model with 4 panel Mongoose shaker screen, can get bigger treating capacity. And the shaker screen is interchangeable with Swaco Mongoose screen, you can get the shaker screen from local Swaco distributor easily.

As it is single deck, relative easy to change shaker screen compared with double deck shale shaker.

Continue reading →

Nigeria, as the  world sixth-largest producer of crude oil, the oil exporation and drilling business is very hot. This lead to large demand on equipment used for oil drilling. GN Solids is  China manufacturer focus on solid control and drilling waste management equipment. During the year of 2013, Nigeria market imported 15 sets of decanter centrifuge from GN Solids.

The most popular centrifuge model for Nigeria oil drilling market is GNLW363VFD. Almost every customer like this model because of big treating capacity, higher G-Force, variable frequency drive. So far we have many successful maketing cases to proof GN Solids Centrifuge with reliable working performance.

Hereunder, pls see below chart of different brand comparison.

Any requirement or questions on centrifuge or other solid control equipment , pls contact GN Solids. We will offer you best support and reliable equipment.

Or send email to : roy@gnsolidcontrol.com   0086-156 0305 4293

Decanter Centrifuge has different functions when it works in different conditions.  As for oil and energy field, we usually use decanter centrifuge for mud system and drilling waste management. GN Solids has many years experience in manufacturering and sales. We have exported many decanter centrifuge to over 60 countries and areas. So far, GN Solids has established some branches to support the prosperous areas, like branches in USA, UAE, Australia, Russia.

Continue reading →

The drilling contractor usually buy different drill equipment from professional manufacturer separately. The equipment generally includes: drill rig, mud pump, Mud Cleaning System, Camping house etc. GN Solids Control is a manufacturer for Mud Cleaning System. Recently, we just offer a solution for Africa customer, 2000hp drill rig Mud Cleaning System. The system includes four parts as below.

Continue reading →

GN Solids Control can manufacture many kinds of shaker screen for replacement. They have control the core technology of the production. The screen model includes the replacement shaker screens for  Derrick 500/2000 PMD/PWP screen, Swaco Mongoose PT screen and also NOV Brandt king cobra shaker screen. These models are mostly popular around the world.

Continue reading →

Separating solids from liquids plays a key role in oil drilling mud recycling. Decanter centrifugal separator from GN Solids Control plays this crucial function exceptionally well. The working performance is strongly related with the working principle. So how it works?

In order to understand this, we need to define what is decanter centrifugal separator.  Decanter centrifugal separator also can be named short as Decanter centrifuge or centrifuge. The most common model is vertical, horizontal and conveyor centrifuges. The principle behind a decanter centrifuge is based on the theory of gravitational separation. For example, if you fill a glass with a mixture of mud and water, over time the weight of the mud will cause it to settle down at the base of the glass. With the mud congealed at the bottom, the water will be forced upwards, creating a clear separation between the two. However, unlike the glass mixture, the process is expedited through the use of continuous rotation. In fact, rotation provides anywhere from 1000 to 4000 times the normal gravitational force, reducing the time required for separation from hours to seconds.

Continue reading →