GN Solids Control is a professional manufacturer of solids control equipment. After more than ten years of continuous development and innovation, GN Solids Control has accumulated rich experience in solids control equipment design and manufacturing. In the past few weeks, GN Solids Control has completed 4 sets of mud-water separation system for pipe jacking with 1000 GPM capacity, 1 set of 240 m3/h three-stage purification mud-water separation system and 3 sets of mud-water separation system for pipe jacking with 1500 GPM capacity for a customer in Southeast Asia .

1. 4 sets of GNMS-1000D pipe jacking mud-water separation systems include a double-layer shale shaker and 2 sets of 10-inch sand removal cyclones. The clean slurry treated by the bottom vibrating screen is equipped with a collection tank under the shale shaker. The slurry is sucked by a centrifugal pump and pumped into a desilting cyclone for secondary separation.

2. GNTBM-240 three-stage purification mud-water separation system, it is mainly composed of shale shaker, desander, desilter and 2 mud pumps. The three-stage purification mud-water separation system can handle large-particle mud. Most of the solids are first removed in the bottom coarse screen. In order to meet the requirements of high wear resistance, GN Solids Control engineers have made many special designs, such as the vibrating screen receiving bins are covered with wear-resistant PU, and the connection ports are also effectively protected.

3. In addition to the above separation systems, this project also includes 3 sets of GNMS-1500D pipe jacking mud-water separation systems. Similar to the 1000 GPM pipe jacking mud-water separation system, the GNMS-1500D also includes a double-layer shale shaker, 2 large 14-inch cyclones and a 75kw centrifugal pump.

4.GN Solids Control can provide standard mud treatment equipment as well as customized mud treatment system, welcome to consult.

GN Solids Control is a professional supplier of solid-liquid separation processing equipment. Most of the equipment it produces, such as vibrating screens, mud cleaners, decanters, and cuttings dryers, are widely used in the drilling industry.

Today we mainly introduce primary purification equipment shale shaker and secondary purification equipment mud cleaner

1. Shale shaker

GN shale shaker uses Italian OLI or American Martin motor, and Siemens Schneider is used for electrical components. Heavy-duty design, the overall heat treatment of the screen box, the vibration strength can reach 8.0G, which can meet the use of various working conditions. The shale shaker is mainly used for primary screening to separate solid particles above 100um. At the same time, the size of the screened particles can be adjusted by adjusting the mesh number of the shale shaker. The distributor distributes the mud to two shale shaker for simultaneous processing, increasing the processing capacity

2. Mud cleaner

The GN Slurry Cleaner is a compact treatment unit with a desander and desilter on the shaker to form a compact all-in-one module, which saves a lot of money compared to using the shaker, desander and desilter alone Use space and facilitate transportation. The mud cleaner provided to customers is equipped with a 10-inch desilting cyclone and a 4-inch desilting cyclone. The desilting cyclone can separate solid particles above 40-60um, and the desilting cyclone can separate 20-40um. The above solid particles provide guarantee for subsequent mud recovery or use of centrifuges.

In addition to shale shaker and mud cleaners, GN Solids Control can also provide various other solids control equipment, including centrifuges, cuttings dryers, mud transfer pumps and other equipment.

Feel free to contact the GN team.

GN Solids Control’s shale shaker is mainly used in projects such as the mud circulation system in the mud solids control system. Shale shaker with different numbers of screens can be used in different working conditions. With other equipment such as centrifuge and Mud Cleaner, it can fully meet the requirements of drilling. The high-performance drilling fluid shaker can directly or indirectly generate more economic benefits for our customers. The customers of this offshore platform drilling project ordered It is the mud vibrating screen and mud tank produced by our company.

Features and Benefits of GN Solids Control Drilling Fluid Shakers

1 Steel screen box bottom frame.

2 brand motor OLI, durable

3 The patented product of mechanical and electric synchronous lifting is both stable and reliable, and easy to operate, and can be operated without stopping

4 High excitation intensity up to 7.5G and adjustable

5 Quickly disassembled pre-tensioned design shaker screen, the screen is made of composite material, with longer life and better effect

6 The electronic control adopts Siemens Schneider electric components

7 Overall heat treatment of the screen box, high-quality anti-corrosion paint spraying

8 Unique screen box sealing design, can be used for high mesh screening

Features of GN Solids Control Screens

The screens used by GN Solids Control shale shaker are produced in strict accordance with API standards, and the replacement screens for shale shaker on sale can be ordered from our company. GN Solids Control provides different types of mud shale shaker including but not limited to the following content:

Composite plastic frame vibrating screen is made of composite plastic material cast frame and stainless steel wire mesh bonding, because the composite plastic material itself has high toughness and strong plasticity, so this product has a longer service life and a more beautiful appearance.

The screen is made up of the bottom frame and 2 layers and 3 layers of 304 or 316 stainless steel mesh cloth. Due to the different mesh numbers and punching holes, the screening effect of the screen is more fine. The lower layer of high-strength frame and support ribs and the upper layer of moderately tensioned screen cloth are closely combined, which greatly enhances the strength and durability of the screen, and achieves better screen filtering effect. The range of screen mesh is generally 20 Head to 325 head.

If you are interested in such products, please contact GN Solids Control

GN Solids Control is a supplier and manufacturer of solid-liquid separation equipment. With the use of more and more mud separation systems, GN Solids Control has been recognized by more and more users. In the past few weeks, GN Solids Control has completed 4 sets of 1000 GPM pipe jacking mud separation desander, 1 set of 240 m3/h shield mud treatment system and 3 sets of 1500 GPM pipe jacking mud separation equipment for Asian customers Production.

1.4 sets of GNMS-1000D mud separation system includes a double-layer shale shaker, which is equipped with 2 sets of 10-inch sand removal cyclones. After the bottom shale shaker treatment, there is a collection tank under the shale shaker. The slurry is sucked by a centrifugal pump and sent to a large cyclone for secondary separation.

2. The GNTBM-240 shield mud separation system is a compact processing device specially designed for the shield industry. It is mainly composed of shale shaker, desander, desilter and 2 mud pumps. The GNTBM-240 is capable of handling 240 m3/h of high solids percentage and large particle slurries. Most of the solids are first removed in the bottom coarse screen. In order to meet the requirements of high wear resistance, GN engineers have made many special designs, such as all shale shaker feed boxes are covered with wear-resistant PU, and all connection ports are also thoroughly protected.

3. In addition to the above mud separation system, the Asian customer also purchased 3 sets of GNMS-1500D pipe jacking mud treatment equipment. Similar to the 1000 GPM system, the GNMS-1500D also includes a double-deck shaker, 2 large 14-inch desander cyclones and a 75kw centrifugal pump.

GN Solids Control can provide standard mud treatment equipment as well as customized mud treatment systems, and customers are welcome to inquire.

After more than ten years of development, GN Solids Control’s products have been successfully sold to many countries and regions around the world, and a branch has been established in the United States to provide advanced solid-liquid separation equipment for North American customers. Recently, our company has successfully provided Canadian customers with Provide a set of river dredging solid-liquid separation equipment, which mainly includes the following modules.

1. Double-layer shale shaker

GNZS706 vibrating screen adopts double-layer treatment design. The upper and lower layers are screened twice with different sizes and meshes to obtain better screening effect. The vibration motor of the vibrating screen adopts the famous brand Martin or Oli.

2. Sand removal cleaner GNZJ703F-2S

GNZJ703F-2S desander cleaner is a combination of desander and vibrating screen, with a compact structure. The desander adopts two 10-inch desander cyclones, which are used to deal with the solid phase of large particles treated by the vibrating screen. .

3. Desilting cleaner GNZJ703F-12N

The desilter cleaner is composed of a vibrating screen and a desilter. The desilter is composed of 12 4-inch desilter cyclones, which are mainly used to remove solid particles larger than 25 microns in the mud.

4. Sludge dewatering large drum centrifuge GNLW764A-VFD

GNLW764A-VFD centrifuge is a large drum centrifuge independently developed by GN Solids Control. The length-diameter ratio of the centrifuge is 4.2:1. It is mainly used in shield mud treatment, river dredging and other industries. Stable performance and so on. The centrifuge is also equipped with a circulating oil lubrication system, which can effectively reduce the bearing temperature and improve the bearing service life. It is also equipped with a temperature sensor, which can be monitored and controlled in the control system.

5, screw conveyor

In order to facilitate the transportation of the treated solid phase mud, our company has provided 8 sets of screw conveyors for customers. The design length of the GN Solids Control screw conveyor is 12 feet, so that each section can be replaced as a standard unit.

6. Centrifugal pump

Centrifugal pump is mainly used to supply slurry to desander cleaner and deslimer cleaner in the system. The pump adopts mechanical seal, which has long service life and reliable performance.

7. Solid-liquid separation mud tank

The system is equipped with three sets of mud tanks for the customer, which are mainly used to install vibrating screen, de-sand cleaner, de-sludge cleaner and store the treated mud.

GN Solids Control is a professional manufacturer of mud solids control equipment. After more than ten years of development and innovation, GN Solids Control has accumulated rich experience in mud solids control system design and manufacturing. The customer customized two sets of drilling mud solids control systems and sent them to the customer site to complete the customer acceptance.

1. Mud purification and recovery module

The GN Solids Control mud purification and recovery module is mainly composed of two sets of 12000*24000*25000mm mud recovery tanks. There are four sets of GN Solids Control GNZS703F-SHBF shale shaker installed on the tank surface, and customized professional mud according to customer requirements. Spray anti-splash system; 2 GNZJ703F-S2S12NF mud cleaners are also equipped with spray anti-splash system for customers, and equipped with sand pump, mixer, mud gun and explosion-proof lighting according to the tank equipment.

2. Mud mixing module

The mud mixing module mainly includes two sets of mud storage tanks and mud mixing tanks. Each mud mixing module is equipped with a set of jet mud mixing device for the mixing of drilling mud, and is equipped with corresponding agitators, mud guns, explosion-proof lighting and other equipment.

3. Slurry tank module

The mud storage tank module is similar in function to the mud mixing module. It is used to store the purified mud of the purification module and the new mud produced by the mud mixing module. It is mainly composed of a 12000x2400x2500mm mud tank and supporting agitators, mud guns, explosion-proof lighting and other equipment. composition.

4. Other supporting equipment

In order to ensure the normal operation of the mud treatment system, GN Solids Control also provided customers with corresponding auxiliary equipment, including 2 submersible pumps, 2 centrifugal pumps and pump filters and other equipment.

GN Solids Control has rich experience in solid-liquid separation systems, and provides a large number of solids control equipment for oil drilling customers, including centrifugal pumps, decanters, etc.

1. Centrifugal pump

Centrifugal pumps are mainly used to transport drilling mud. They can be used as slurry supply pumps for desanders, desilters, and centrifuges, as slurry mixing pumps for jet mixing, and as filling pumps for replenishment pumps and mud pumps. All models of GN Solids Control centrifugal pumps feature mechanical seals for long service life and reliable performance. Parts can be interchanged with pumps of internationally renowned brands, so that customers can more easily find wearing parts.

2. Decanter centrifuge

Decanter centrifuge is one of the key equipments for drilling mud solid phase control and drilling waste treatment. The decanter centrifuge produced by GN Solids Control has a variety of drum sizes to choose from, including 9 inches, 14 inches, 18 inches, 22 inches and 30 inches, and each model has different aspect ratios, and fixed frequency , frequency conversion and hydraulic drive three ways to adapt to different processing capacity requirements.

This time, the GNLW363CG centrifuge is provided to the customer, which is driven by a fixed frequency and can meet the requirements of on-site mud treatment. The drum is made of two-way stainless steel SS2205 by centrifugal casting, which has better performance. The wear-resistant sleeve of the slag discharge port is a special tungsten carbide hard alloy sleeve, which has extremely high wear resistance and is not easy to break. At the same time, the pusher is protected by a replaceable wear-resistant alloy sheet, which has a long service life and is easy to maintain.

If you have a demand for solids control separation equipment or a solution request, please call GN Solids Control.

GN Solids Control is a professional manufacturer of solids control equipment and drilling rig waste treatment equipment. After more than ten years of development and innovation, GN Solids Control has successfully supplied several sets of solids control and waste treatment to many countries and regions around the world. Equipment, recently, our company has successfully supplied a number of drilling dryers and solids control centrifuges to foreign drilling companies, and sent them to the customer site to complete the installation and commissioning.

1. Centrifuge

GN Solids Control GNLW363C decanter centrifuge is the best-selling high-speed centrifuge in the petroleum industry and is widely used in drilling mud treatment. Solid-liquid separation in the chemical industry.

2. Vertical cutting dryer

GN Solids Control GNCD930 Vertical Cuttings Dryer is a machine specially developed by our company for processing drilling cuttings. It is mainly used to remove large particle cuttings in drilling waste slurry and can effectively reduce the liquid phase in drilling cuttings. content, to ensure that drilling cuttings can meet transportation and environmental protection requirements. And according to the different working conditions of customers, our company also provides customers with sieve blues with different gaps to control the solid particles to be screened.

3. Screw conveyor

Screw conveyors are widely used in drilling waste disposal sites, mainly used to feed the cuttings dryer and transport the waste cuttings separated by the cuttings dryer to the designated location.

4. Centrifuge feeding screw pump

The screw pump is an ideal equipment for feeding the centrifuge. It does not shear and stir the material to ensure the material characteristics. Therefore, our company matches the screw pump as the slurry feeding pump for the centrifuge.

Recently, the large-scale drilling mud station processing system equipment produced by GN Solids Control has undergone rigorous testing in the factory, and is ready to be loaded and shipped to the customer site of an international drilling fluid service company;

The system mainly includes equipment:

1. Mud solids control system module: 1 set of drilling fluid shale shaker GNZS594F, 1 set of medium speed centrifuge GNLW452D, 1 set of high speed centrifuge GNLW363C;

2. Mixing tank module: 4 mixing sand pumps and 4 mixing hoppers;

3. Vertical mud storage tank module: 70 500BBL (80m³) mud tanks.

Many of GN Solids Control’s orders are not the first orders. For example, this order is a repeat order from the customer. For example, the customer’s construction site not only has GN Solids Control centrifuges, shale shaker and other solid-liquid separation equipment, but also GN Solids Control vacuum pumps and other related requirements. I believe that with the support of the GN Solids Control team, we will reach more cooperation.

So what are the characteristics of GN Solids Control equipment that can stand out among many domestic solid control counterparts? The following highlights the unique features of GN Solids Control products:

Centrifuge:

1. The rotating drum and the screw of the decanter centrifuge rotate at a high speed in the same direction at a certain differential speed. The material is continuously introduced into the inner cylinder of the conveying screw from the feeding pipe, and then enters the rotating drum after being accelerated.

2. Under the action of the centrifugal force field, the heavier solids are deposited on the drum wall to form a sediment layer. The conveying screw continuously pushes the deposited solid phase to the cone end of the drum, and discharges it out of the machine through the slag discharge port.

3. The lighter liquid phase forms an inner liquid ring, which continuously overflows the drum from the overflow port at the large end of the drum, and is discharged out of the machine through the liquid discharge port.

4. The straight section of the drum belongs to the clarification zone, and the cone section of the drum belongs to the extrusion drying zone.

In addition to the mud solids control system module, mixing tank module, vertical storage tank module and other equipment introduced above, GN Solids Control also produces a complete set of oil drilling solids control systems, non-excavation and coal bed methane drilling rig mud recovery systems, piling and Shield mud purification system, drilling waste treatment system, industrial environmental protection mining and other solid-liquid separation systems.

If you are interested in this project, please contact us

So what are the characteristics of GN Solids Control equipment that can stand out among many domestic solid control counterparts? The following focuses on the unique features of GN Solids Control vertical cutting dryer products:

Features:

1. It has a wide range of applications. The drill vertical cuttings dryer is specially used to process the drill cuttings discharged from the drilling fluid shaker. It is suitable for oil machine mud (OBM) and composite base mud (SBM). It has been obtained in domestic and foreign drilling projects widely used.

2. The separation factor is high. There is a 900RPM vertical cutting dryer that meets the requirements of conventional use, with a separation factor of 420G, or variable frequency control can be selected to achieve the expected use effect by adjusting the speed.

3. Bearing brand, use FAG brand bearings.

4. The discharge scraper on the rotor is sprayed with a high wear resistance coating with a hardness of up to: HRC65, which greatly extends the service life. The scraper rotor assembly has undergone strict dynamic balancing treatment, which can facilitate future replacement of parts without affecting the balance of the whole machine.

5. The specially designed high-precision stainless steel split screen basket ensures the separation effect, and has a long service life and is easy to replace. The screen basket body has undergone strict dynamic balancing treatment, which can facilitate the replacement of the screen basket in the future without affecting the balance of the whole machine.

6. The unique high-pressure air knife design has applied for a national patent, which can effectively prevent the screen basket from clogging, especially in the treatment of water-based drill cuttings and high-viscosity oil-based drill cuttings. The omni-directional liquid phase flushing system, combined with a unique nozzle, can effectively prevent sand accumulation and blockage of the liquid outlet.

7. Circulating oil circuit cooling system, equipped with stainless steel oil tank with heat sink, can meet the operation in high temperature environment.

In addition to the above-mentioned shale shaker, vertical cutting dryer and screw conveyor equipment, our company also produces a complete set of oil drilling solids control systems, non-excavation and coal bed methane drilling rig mud recovery systems, piling and shield mud purification systems, and drilling waste Treatment system, industrial environmental protection mining and other solid-liquid separation systems.

Welcome customers to visit our company for inspection.