Not only for drilling application( oil & gas drilling, HDD, geothermal, CBM, water well drilling), GN equipments can be also used for mining slurry separation, dredging slurry management, piling and tunneling.

Dredging and Dewatering equipments

GN dredging and dewatering equipments are designed to feed slurry directly from the dredge. GN dredging slurry separation system separates solids from dredging slurry through a three phase system.

In addition, the solids that are removed are dewatered to a stackable “press filter” state, which can be readily moved with front end loader, conveyor and/or dump trucks. The effluent is pumped off by a centrifugal pump.

The separation process is continuous and operates completely mechanically without any chemical enhancement. The dredging slurry separation system is designed as a three phase separation system, 1^st separation is shale shaker, 2^nd separation is desander, 3^rd separation is desilter. Sometimes as the client’s requirement, we only design 2 phase shale shaker and desander. The desander and desilter are made into separate mud cleaner with large screen area.

Continue reading →

GN solids control designed a standard mud system for mine slurry solids separation, which includes GNLW223 decanter centrifuge, GNZS752 shale shaker and a compact size mud tank, which is installed on top of the trailer. The total system capacity is 100L/min for the slurry.

Mine Slurry Solids Separation

Mineral exploration methods vary at different stages of the process depending on size of the area being explored, as well as the density and type of information sought. The most common drilling for mine is diamond drilling. Exploration diamond drilling is used in the mining industry to probe the contents of known ore deposits and potential sites.

GNLW223 mini decanter centrifuge specs:

If you require mine slurry solids separation system, pls contact GN sales.

What is dredging?

Dredging is an excavation activity or operation usually carried out at least partly underwater, in shallow seas or fresh water areas with the purpose of gathering up bottom sediments and disposing of them at a different location. This technique is often used to keep waterways navigable.

Dredging equipments in Colombia

What is dredger?

dredgers is a piece of equipment which can dig,transport and dump acertain amount of under water laying soil in a certain time.

In a dredging slurry separation project, dredge equipments include but not limit to dredger( dredge boat), dredge pumps, Flocculants mixing tower , slurry concentration tower, belt press filtration, sedimentation tank, dredging slurry separation system(DSS), etc. 

Continue reading →

The mud cleaning system produced by GN solids control is widely used for horizontal directional drilling , water welling drilling ,coal bed methane, geothermal hole and mining diamond core drilling , it is used to separate the drill cuttings from the mud, so that the clean mud can be re-circulated to continue the drilling process.

As the Geothermal drilling usually close or inside the downtown, this requires the mud system to be compact with less footprint and user friendly with less noisy. Also Geothermal well drilling sometimes require high capacity performance for deep wells. Below is the jobsite photo of mud cleaning system for geothermal drilling, which is produced and commissioning by GN solids control.              

Geothermal mud cleaning system

Like water well drilling, mud rotary drilling is also the desired method for installing geothermal loops. As the bit penetrates the soil, it creates smaller fragmented pieces that are called drill cuttings. The mud carries these cuttings to surface to create an open hole from the top down to the bottom. The drill cuttings are collected into a mud pan or settling pit on surface and then the mud is re-circulated to continue the drilling process.

Continue reading →

GN solids control design and manufacture linear motion shale shaker, and we produce shale shaker screens by our own factory. GN shaker screen factory Is located in the largest wire mesh center of Asia, we also supply replacement shale shaker screen for Swaco Mongoose( both in steel frame material and composite material) and Derrick FLC500 shale shaker, FLC2000 shale shaker.

shale shaker screens

By shaker screen frame, the screens type we can produce as

Hookstrip shale shaker screen, steel frame screen, composite material screen

By API mesh, we can produce from API40 to API 325. For special API mesh, pls confirm with GN. Our shale shaker screen is produced according to API RP13C.

By shale shaker brand & model, we can produce replacement shale shaker screens for

Derrick FLC500,FLC2000, Brandt Cobra, MI-SWACO Mongoose PT,BEM600, GN solids control, Kemtron, Fluids system, etc

By screen mesh layer, we usually supply shaker screens with 2 layers or 3 layers.

Continue reading →

Drill solids are the main contaminant of all drilling fluids and therefore their control is of the utmost importance. There are 3 main ways of controlling solids:

• Dilution

• Mechanical removal

• Gravity Settling

shale shaker for solids control

I ever saw in the water well drilling site in Mongolia that they do not use any solids control equipments but only dig several mud pits, by this way, it is very low efficiency and Environmental Pollution.

Solids control system is a way for mechanical removal the drill solids. Mainly it includes screen devices & Centrifugal Separation Devices. Screen devices is the most important equipment called shale shaker. In the future of solids control system, shale shaker will become the only solids control equipment which will be used instead of desander, desilter, mud cleaner, decanter centrifuge by improvement of its design. At present, linear motion shale shaker is the most popular vibration mode shale shaker.

But the arrangement of vibration motor various by different shale shaker manufacturer. Sometimes it is vertical installed, sometimes it is horizontal installed, it doesnot mean that horizontal installed shale shaker must be balanced elliptical motion shale shaker, it might be linear motion shaker.

Continue reading →

As a part of rig package, mud system is a separate but an essential part, the handling of drilling fluids can save huge cost of drilling. In the early oil industry open earthen pits were used as settling area to separate solids and mud thereby acting as a solids control equipment.

mud system for a rig

Now, with the stringent environmental regulations and high mud costs, the economics of an effective mud system come into consideration. Different solids control companies introduce zero-discharge systems, closed-loop systems, “quick move” technology, screening technology, disposal options etc. No reserve-mud pit is used in a truly closed mud system. Mud is continually processed primarily by mechanical means, such as screening, hydrocyclone and centrifuging to remove solids initially. A second stage to remove colloidal solids is by wastewater cleanup techniques.

Major components of a mud system, including:

Mud gas separator, flare ignition device

Shale shaker, mud cleaner(or desander, desilter), vacuum degasser, decanter centrifuge , centrifugal pump, mud hopper,  mud agitator, mud gun, mud tank and others, such as cutting dryer, screw auger, mud cooling unit,etc.

Continue reading →

GNZYQ1000 mud gas separator is capable of handling 1000~1400gpm drilling fluids. We have 6 units of mud gas separator in stock which are all ready for shipment with painting &　package, welcome to contact with our sales. Except for mud gas separator, we also have flare ignition device in stock, which usually worked together with mud gas separator for oilfield. Mud gas separator is used to separate the harmful gas from the drilling mud, then flare ignition device is used to connect to the gas discharge line of mud gas separator, and burned it , they work together to avoid “kick” situation.

According to base type , the mud gas separator can be divided into :

mud gas separator

• Fixed type
• Elevating type

According to the bracket type, it can be divided into horizontal type and vertical type. Most of Chinese mud gas separator is vertical installed, when you need to transport it, you can lay it down , and there is lifting pad hotizontally. MI-SWACO mud gas separator is horizontal type with a skid, it is for simplifies transport, spotting and installation. Unit can lay down during over-the-road transport

Continue reading →

GNZS703 shale shaker produced by GN solids control has been widely used in oil & gas drilling. GNZS853 shale shaker is normally used for drilling cuttings treatment.

Below is the photo taken in South America oilfield drilling site. They use GN shale shaker to separate the large solids from the drilling fluids and get clean mud for reuse. Also they user GN shale shaker as a underflow shaker to help the performance of desander cone & desilter cone. 

shale shaker for sale

To know how to operate GN shale shaker is much more important, also the maintenance. Only if you operate and maintain it according to the manual, you will use it same with some famous brand  shale shakers.

1 Angle adjustment

The angle can be adjusted both under running and off condition.When delivered ,the deck is horizontal(0°) 。While operating with the same shaker screen, according to the worksite mud property, and feeding capacity ,by adjusting the deck angle in order to improve the treatment result .When the drilling mud run off, enlarge the deck angle to solve the problem. Angle adjustment range -1°~+5°，rated angle 0°~3°。

2 Pool configuration

A better pool configuration can maximize the screen area and such achieve better result. It is hard to set the deck angle at one time ,it needs the operation personnel adjusting several times according to the flow of the mud .The best pool configuration is when the mud covers the first and second shaker screen.

3 Screen tention

Continue reading →

GN will show a 14 inch bowl decanter centrifuga at OTC, after the show, it will be sold out to South America. To length the service life of decanter centrifuga in drilling fluids separation, proper installation & maintenance is necessary.

At present, GN provide the decanter centrifuga below:

decanter centrifuga

By bowl speed: high speed decanter centrifuga, middle speed decanter centrifuga y VFD decanter centrifuga

By bowl diameter: 14inch bowl, 8.7 inch bowl, 18inch bowl y 22 inch bowl decanter centrifuga

By speed adjustable o no: fixed speed decanter centrifuga y VFD decanter centrifuga

By screw propeller protection method:　coating with tungsten alloy o welding with tungsten carbide tiles

Totally we have GNLW223, GNLW363, GNLW452, GNLW453, GNLW553 series centrifuga. The main components of GN decanter centrifuga are as below:

1 bowl drive motor 2 screw conveyor drive motor 3 gear box 4 screw conveyor 5 bowl 6 hydraulic coupling 7 skid 8 vibration isolator 9 collection box 10 solids discharge chute 11 feed tube 12 fluids discharge churt 13support bracket

Among them, gear box, feed tube and screw conveyor is the most wearable parts, you need regular maintenance on them.

Continue reading →