Non-excavation mud clean system is an important part of the GN Solids Control system. Based on its compact structure, small footprint and high efficiency, it is widely used in mud treatment in urban infrastructure construction. As a country with rapid development of infrastructure construction, the construction of underground pipeline networks in urban infrastructure construction in India has also become very busy. Underground pipeline network construction is carried out by non-excavation companies after winning the bid, so non-excavation companies generally have multiple rigs and purification systems. Generally, each drilling rig needs to be equipped with a mud recovery system, corresponding to the processing capacity of the related drilling rig. GN Solids Control has exported multiple HDD mud recovery systems to India.

The standard non-excavation mud recovery machine system consists of mud recovery equipment, mud mixing equipment and mud collection tanks. Unlike the mud recovery device in the oil and gas drilling industry, non-excavation drilling first discharges the mud back to the mud pit on the ground, and then uses a vertically installed submerged slurry pump to transfer the mud to the mud recovery system. Purification system, Shale Shaker, Desander, Desilter, and progressive removal of rock cuttings and solid waste. This is a standard configuration. If there are higher separation requirements, we will add a centrifuge to the system as a fourth-stage processing equipment to control the solid particle diameter of the slurry at 5-10 microns.

The size of the mud tank usually depends on the size of the rig and the volume of mud that needs to be stored. On the mud tank, a stirrer and a mud gun are needed to stir the mud to suspend the solids in the mud. To configure the proper mud, a jet mixing system is needed to add chemicals to maintain the properties of the mud.

GN Solids Control high-profile mud recovery bears have different sizes and design schemes and are widely used in oil and gas drilling, non-excavation drilling, piling, TBM and other separation projects. GN Solids Control is pleased to provide you with professional products and configuration information about mud recovery systems, please feel free to contact us if you are interested.

For more information on GN Solids Control, please feel free to contact us.

GN Solids Control drill cutting dryer is widely used in oil-based mud drilling sites around the world. Recently, our after-sales engineers conducted customer return visits to several sets of drill chip dryers sold to Xinjiang. Received good reviews from customers.

The drill cuttings dryer is designed to further process the cuttings discharged from the shale shaker of the solid control system to recover more drilling mud and reduce waste emissions. Greatly reduce waste disposal costs and save consumption of drilling fluid base fluid. GN Solids Control vertical cuttings dryer can reduce the oil content of cuttings(OOC) to less than 5%.

GN Solids Control can provide screw conveyors for receiving and feeding, or drill cutting conveying pumps. Drilling cutting dryer, decanter centrifuge, slurry feed screw pump, installation tank and bracket, discharge screw conveyor and corresponding quick-mount bracket. Meet the requirements of customers’ overall solutions.

1: Screw Conveyor——According to the layout of the on-site mud recovery system, GN Solids Control provides lifting support legs for screw conveyor installation, which are used to collect drilling debris from the mud system, especially the first-level shale shaker, and transport it to the rock cuttings. Dry machine. If more flexible equipment layout is needed on site, GN Solids Control recommends replacing the screw conveyor with a sludge vacuum pump.

2: Rock cuttings dryer-Rock cuttings dryer is the key equipment of the system. It is used to shake off the oil and liquid in the cuttings by centrifugal force, thereby reducing the oil content of the cuttings by less than 5%. GN Solids Control’s cuttings dryer is equipped with an air knife and flushing system to ensure that the dryer runs for a long time without blocking the screen basket. Speeds of up to 900 rpm ensure the dryness of the cuttings discharged from the cuttings dryer.

3: High-speed Decanter centrifuge—The liquid discharged from the drill cuttings dryer is pumped to the Decanter centrifuge for processing, removing ultra-fine solids, so that the drilling fluid can continue to be used for drilling.

In addition to the integrated drilling drying system, GN Solids Control can also provide a modular design, that is, each equipment is equipped with a corresponding installation tank or bracket, which is convenient for customers to make different combinations or use equipment individually according to the working conditions.

For more information on GN Solids Control, please feel free to contact us.

This week, at the GN Solids Control workshop, a drilling rig mud recycling system is in the factory trial assembly, and the system will be shipped to a drilling company from Hebei.China, GN Solids Control has more than 10 years of experience in customizing mud circulation systems.

This mud recycling system contains four levels of solid control equipment. The main supporting equipment is as follows:

1: Two drilling fluid shale shakers GNZS703F are used for the first-level solid control treatment. A mud distribution pipe is provided between the two shaker screens, which can evenly distribute drilling mud to the two shaker screens. GN Solids Control drilling fluid shaker screen has a simple structure and uses patented net sealing technology to ensure stable performance.

Two: GNZJ752-2S desilter and GNZJ752F-12N desilter are designed as small cleaners, and the area of ​​underflow screen is 1.4m2, which is about the same as that of conventional desilter and desilter underflow screens, and it also reduces the area reasonably . With this small shaker, the sludge discharged from the cyclone will be dried again to recover more drilling fluid and reduce waste emissions. All GN Solids Control shaker screens use composite screens for long life and good rust resistance.

Three: GNLW452 decanter centrifuge, can be used for heavy stone recovery or fine particle separation. All GN Solids Control decanter centrifuges use hard alloy plates to protect the screw blades and solid exhaust wear-resistant sleeves, which can ensure stable operation at low cost for a long time.

All mud recycling solid control equipment is installed on 3 mud tanks, including mud circulation and mud mixing. This mud system is equipped with a total of 3 sand pumps, 2 of which are used to feed the slurry to the cyclone, and the other is connected to the mud bucket for mud mixing.

Prior to shipment, all mud recycling systems at the GN Solids Control plant will be tested for installation, equipment will be tested for water, and leak tests will be performed on storage tanks to ensure stable work on site.

For more information on GN Solids Control, please feel free to contact us.

The screen is the most vulnerable part of the vibrating screen in drilling engineering work. The quality of the screen affects the efficiency of drilling operations and the cost of drilling engineering to a certain extent. Since its inception, GN Solids Control has been providing customers with high quality screens, providing distributors with long-term profitable business.

The screens produced by the GN Solids Control screen production line include almost all popular screens on the market:

1. GN Solids Control provides replacement screens for almost all of the well-known drilling fluid shaker brands in the drilling industry. For GN Solids Control’s RFQ, customers have several ways to get advice. Method 1, providing the brand and API number of the screen. Method 2, providing the original manufacturer part number of the screen. GN Solids Control sales staff will make recommendations based on the information provided.

2. GN Solids Control can provide screens with frame and hook stripes, which can be flat or wavy.

3. GN Solids Control now offers composite frame screens as more and more users prefer to use this type of screen. This type of screen extends the life of the screen and is easy to store.

GN Solids Control is the only manufacturer of drilling mud screens with a complete API series of screens that have been tested by authorized third parties and have declared API pass rates in accordance with API RP 13C.

1. GN Solids Control uses a robot to weld the internal steel frame to ensure consistent quality.

2. The plastic material covered by the outer layer is 100% new and clean and not recycled.

3. GN Solids Control screen uses 3-layer design for API 60

4. The wire mesh makes the surface of the screen stronger.

5. If less than 10% of the screen is broken, the screened rubber plug can be used to repair the broken screen.

The drilling fluid shaker is the first stage of drilling mud separation. Qualified and efficient vibrating screens not only reduce drilling costs, but also reduce the load on subsequent equipment in the mud recovery system.

For more information on GN Solids Control conveyors, please feel free to contact us.

Last week, a batch of vertical cutting dryers and centrifuges were commissioned at the first GN Solids Control plant and shipped to a large mud service company in Russia. Vertical cuttings dryers and settling centrifuges are among the key equipment in oil drilling mud service engineering.

The vertical cuttings dryer is a separation device primarily used in drilling cuttings processing systems. The cuttings discharged from the shale shaker of the solid control system can be transported to the cuttings drying device for further processing to recover more drilling fluid.

The GN Solids Control vertical cuttings dryer has the following features:

The mesh size of the device is available in 250, 350 and 500 micron sizes for different separation sizes.

The air knife system prevents material blockage during operation.

The exclusive drain ring rinsing system prevents fine solids from depositing inside the unit.

The lubricating oil pump is interlocked with the main motor to ensure smooth running of the bearing.

The vertical cuttings dryer can be used for further processing of OWM and SWM mud cuttings. After treatment by the dryer, the cuttings oil content can be less than 5%.

In the mud service industry, decanter centrifuges have a wide range of applications. First, it can be used for barite recovery and separation of ultrafine solids in drilling fluid solids control systems. Second, the liquid phase discharged from the vertical cuttings dryer will be pumped to a decanter centrifuge for further solid-liquid separation to recover more drilling fluid. The sedimentation centrifuge is an important device to maintain the performance of the drilling fluid.

The GN Solids Control centrifuge has the following features:

Drum diameters are available in 9, 14, 18, 22, 25 and 30 inches.

The drum material is made of 2304 duplex stainless steel.

Centrifugal casting technology makes the drum material distribution more dense during the manufacturing process of the drum to achieve better dynamic balance.

The screw thruster and the slag discharge port are protected by tungsten carbide bushings, which have long working hours and small maintenance.

The programmable controller and variable frequency speed control system can meet the higher intelligent requirements of customers.

For more information on GN Solids Control unit, please feel free to contact us.

The shale shaker is one of the main core equipment of the drilling mud solid control system. Recently, GN Solids Control received a batch of shale shaker orders from customers in Indonesia. After careful production and inspection, the shale shaker is now ready for shipment.

The GN Solids Control GNZS series shale shaker is the first stage of mud purification separation equipment in the mud system, and its importance is self-evident. The performance of the shale shaker will largely determine the mud purification performance and results of the complete solid control system.

In the design and manufacture of the GNZS shale shaker, we not only fully considered the working stability of the shale shaker, but also put a lot of effort into the ease of maintenance of the equipment.

First, the GN Solids Control shale shaker are all heat treated to withstand up to 8 G excitation forces.

Secondly, in order to ensure the good sealing performance of the shale shaker, GN Solids Control adopts U-groove at the bottom of the screen box and embedded rubber sealing technology. Not only makes the sealing effect better, but also makes the replacement of the sealing rubber more convenient.

GN Solids Control has developed three shale shaker to quickly change screens. Wedges, ratchet wedges and quick-press structures. Customers can choose which screen to press according to their own preferences.

In addition to the process of quickly changing screens, GN Solids Control has also improved the damping rubber springs, so that the steel springs and rubber bushings are firmly combined, which not only improves the safety of the equipment, but also further reduces the wearing parts. quantity.

GN Solids Control shale shaker are primarily used for the purification of drilling mud. GN Solids Control shale shaker are widely used in oil drilling, trenchless and drilling waste management projects by replacing different types of models.

In order to achieve better mud purification, GN Solids Control technicians have also developed vacuum systems. The device can be connected to the last screen of the shaker. All GN Solids Control shakers are compatible with the installation of this vacuum screen system.

For more information on GN Solids Control conveyors, please feel free to contact us.

Recently, GN Solids Control completed the manufacture of bulk solid vacuum pumps for customers from Africa. With the wide range of applications, GN Solids Control solid-state vacuum pumps have received wide attention since the release of the news, and their performance has been recognized by users on site.

Features of the GN Solids Control solid vacuum pump:

Fully pneumatic drive – The solid vacuum pump is a complete air driven pump that needs to be connected to an air source. There are no electrical components on the pump that allow the pump to be used in certain areas where there is a flammable gas. Vacuum suction, positive pressure alternately discharge.

Widely used – solid vacuum pumps can be used to transport liquids, slurries, concentrated sludge and even solid powders and gravel. A typical use of this pump is to transport cuttings in a waste management system. Some customers install the pump on a mobile raft to complete the transfer from one site to another.

Low maintenance – This vacuum pump consists of a pipe manifold, valves and chambers. The cavity is used to store material, but there are no moving parts in the cavity, which greatly reduces the frequency of maintenance.

How to order GN solid vacuum pump

1. What is the material composition?

2. What is the fluidity of the materials?

3. What is the density of the material?

4. What is the height of inhalation and discharge?

5. What is the distance between inhalation and discharge?

6. What are the current difficulties in transportation?

7. Other materials and videos or other materials related to the site. For vacuum pumps for different applications, GN offers vacuum pumps of carbon steel or stainless steel 304 and 316. For more information on GN Solids Control conveyors, please feel free to contact us.

A drilling mud tank system produced by GN Solids Control for offshore drilling platforms has been assembled at the factory and shipped to the customer site. GN Solids Control has extensive experience in the design and manufacture of mud systems, both standard and custom.

As we all know, the space of the offshore platform layout equipment is limited, the mud tank system is required to be compact in design, and the mud processing function is complete.

The offshore drilling mud tank system is a fully functional and independent design. It has all the necessary equipment to process the drilling mud step by step. According to different working principles, different materials are used to separate impurities of different particle sizes in the drilling mud.

Offshore drilling mud tank system equipment list

The shale shaker is a coarse cuttings removal device for drilling fluid with simple structure and adjustable vibration G force. GN Solids Control connects the main shaker unit and the underflow dry shaker unit to the mud cleaner, making the shaker system larger and reducing the footprint of the system, but ensuring flow.

The system has a centrifugal degasser to remove air that invades the drilling mud. The degasser can effectively remove air and ensure the performance of the mud. This also ensures that the sand pump has sufficient pressure to deliver the drilling mud to the mud cleaner cyclone.

A centrifuge is used to remove fine particles from the drilling mud. The GN Solids Control centrifuge is stable and easy to operate, meeting the needs of the drilling site. The material application of the rotating parts and the protective design of the consumable parts greatly extend the working time and reduce the maintenance cost.

GN Solids Control is also equipped with a screw conveyor to collect the waste from the above equipment. On the platform, collecting cuttings is also an important task due to limited space. For more information on offshore drilling mud tank systems, please feel free to contact us.

This week, GN Solids Control shipped two sets of oil-based cuttings processing equipment to Russia for the recovery of drilling fluids from oil-based cuttings. Considering the weather, the equipment is installed in the container, and this design will also make transportation easier.

The cuttings equipment is an important part of the closed loop mud system, which can recover more valuable drilling fluid and reduce waste discharge. Reduce drilling costs and protect the environment.

GN Solids Control not only provides a single unit, but also provides a cuttings handling system that includes different types of equipment. Vertical drill cutting dryers and settling centrifuges are key equipment in chip handling systems.

For oil-based drilling cuttings, vertical cutting drying units are ideal for separating drilling fluids and cuttings. The drying unit receives the cuttings discharged from the solid-controlled vibrating screen and operates at 900 rpm to effectively reduce the oil on the cuttings to 5%. We use a high-hardness scraper to push the separated chips off the screen. The high quality scraper ensures stable performance of the drying unit and low maintenance costs.

The fine particles flow out of the cuttings dryer through the sieve holes and enter the buffer tank. The waste slurry processing centrifuge is used to further separate the effluent from the dryer. We recommend using an ultra-wearable screw pump to deliver the mud from the buffer tank to the centrifuge for fine particle separation. The centrifuge was run at 3200 rpm to produce a separation factor of 2062 g, under which 2 micron sized fine particles would be removed. After treatment by a sedimentation centrifuge, the drilling fluid can be reused.

GN Solids Control offers vertical drill dryers and centrifuges with fixed speed or VFD variable frequency control modes. Customers can find almost all equipment for cuttings from the GN Solids Control product catalog. Sludge vacuum pump and screw conveyor for cuttings, vertical dryers for high temperature dewatering and high-speed centrifuges for fine cuttings. Please feel free to contact us if you have any requirements.

GN Solids Control is a professional supplier of solid-liquid separation solutions in the market. Recently, a batch of solid-state equipment is ready for shipment to US customers engaged in solid-liquid separation business. The equipment included in this order is a shale shaker and a large bowl centrifuge.

The shale shaker and the decanter centrifuge are two kinds of solid control equipment with different working principles. The shale shaker separates the solids using a wire mesh depending on the solid size, while the centrifuge separates the solids by centrifugal force. The shale shaker is mainly used for the separation of coarse particles, and the sedimentation centrifuge is mainly used for the separation of fine particles. Therefore, in a step-by-step solid-liquid separation system, the process steps of the centrifuge are always located behind the shaker.

GN Solids Control shale shaker are characterized by simple structural design and easy operation. The shale shaker is fully treated to make it strong and able to withstand high vibration forces. During the shale shaker transportation process, fix the shale shaker platform with fixing blocks and bolts. After reaching the scene, just loosen the bolts before the machine is running. The GN Solids Control shale shaker is fixed with a composite frame pre-tightening screen for long life.

GN Solids Control centrifuges use duplex stainless steel as the material for the bowl. The material has better machinability and centrifugal casting technology for better dynamic balance. For solid-liquid separation, GN Solids Control has a range of products to handle different capacities and applications. GN Solids Control centrifuges are not only widely used in drilling fluid solids control systems, but also widely used in environmental industries such as wastewater treatment and mud dewatering.

GN Solids Control offers a full range of solids control equipment for drilling mud recovery projects. At the same time, more and more customers from other industries will use solid-liquid separation equipment. For more information on GN Solids Control, please feel free to contact us.