Mud Solids Control Equipment

Top 550HP workover rig manufacturers in the world

1 New Oil Rigs based in international market

They fabricate and manufacture custom oil and gas rigs for vertical and horizontal well drilling and oilfield work over service.  We have experience in customizing rigs for both desert and arctic service.  Rigs are from 450 to 3000hp and include carrier based, self-elevating, and box-on-box rigs.

2 XQ PACIFIC GROUP CORPORATION

XQ Pacific Group Corporation is incorporated in Ontario province Canada by Canadian law on Jan 17, 2005. It is an integrated service group. Workover rig Products including Heavy-duty workover rig, special environment workover rig, Light-duty onshore workover rig, slant-well workover rig, except these, they also have onshore& offshore drilling rig, etc.

3 GN solids control design and manufacture mud tank system for workover rig and oil & gas drilling rig. We have a standard 550HP workover rig mud tank system, but we can make some changes according to client’s using habit and special requirement.

GN 550HP workover rig mud tank system including:

2 ea GNZS703 shale shaker

1 ea GNZJ703 mud cleaner

1ea GLW355x1250N decanter centrifuge for option

15HP mud agitator

Mechanical seal centrifugal pump

Container suitable mud tank for easy transportation

Continue reading “550HP workover rig mud tank system for sale”

Natural gas drilling rigs can be used not only to identify geologic reservoirs but also to create holes that allow the extraction of natural gas from those reservoirs. Primarily in onshore gas fields once a well has been drilled, the drilling rig will be moved off of the well and a service rig (a smaller rig) that is purpose-built for completions will be moved on to the well to get the well on line. This frees up the drilling rig to drill another hole and streamlines the operation as well as allowing for specialization of certain services, i.e., completions vs. drilling.

Natural gas is a naturally occurring gas mixture consisting primarily of methane, typically with 0–20% higher hydrocarbons. It is found associated with other hydrocarbon fuel, in coal beds, as methane clathrates, and is an important fuel source and a major feedstock for fertilizers.

Hydraulic fracturing, or fracking, uses huge volumes of water, chemicals and sand injected into rock at high pressure to release natural gas. Its development has unleashed a natural gas boom in the US and around the world. US has developed such method to drill for natural gas.

GN solids control provide mud cleaning system for directional drilling and fracking for natural gas, we are thinking to design such mud system for US market. All the electric motors and control panels will use IECex certified or US motors.

To design a system, we need to clarify the following questions:

1 What kind of drilling you are doing？

2 What is your required active capacity of the mud pits？

3 What equipments you used before?　If you have no experience, we will provide our standard design.

Continue reading “Natural gas drilling mud system”

Chile has the world’s largest copper reserves and is also the largest producer and exporter of the metal. In 2011, Chile expects global copper output will reach 16.5 million tonnes, an increase of 345,000 tonnes over 2010. Of the 16.5 million tonnes of output, Chile expects to supply 5.7 million, roughly one-third of the total demand.

Copper mining has played a significant role in the Chilean economy since at least 1825 when foreign investors were actively competing to control the country’s rich copper and silver deposits. By 1835, Chile was exporting 12,700 tonnes of copper per year, mostly to the United States. By 1860 copper accounted for fifty-five percent of the economy.

Mining rig drilling also needs mud recycling system, consider environment protection and drilling requirement. Since mining rig is usually very small, so the mud system should be portable and compact, the production cost will be lower than HDD and oil drilling.

Continue reading “Mining rig mud recycling system”

Last week we exported a mud mixing plant to Spain. Every year we design and manufactured hundreds of mud mixing plant for international clients, especially for developed countries, like UK, Australia, USA, New Zealand, Singapore, etc.

The mud mixing plant is with mud hopper, slurry pump, mud agitator, mud tank, control system, and the painting color can be customized. The mud tank dimension is designed by the active capacity clients required. And we should consider the container shipment when design, freight charge is one of the factor clients may care.

Except for skid-mounted mud mixing plant, we can also make it portable mud mixing plant, and connected with truck head for convenient transportation.

During shipment, we put mud hopper inside the tank by remove the Galvanized Steel Grating, and put the hand rail, stairs on top of the tank.

Except for mud mixing plant, we can also produce mud recycling system plant, including shaker tank, suction tank, reserve tank, water tank, trip tank, pill tank and related solids control equipment. We can also add dewatering unit if clients required.

Continue reading “Skid-mounted Mud mixing plant to Spain”

Shale shaker, mud cleaner, decanter centrifuge, centrifugal pump, mud agitator are basic and important equipments for land rig solids control system. GN solids control is specialist for these equipments, and we are trying to put them into mass production to improve the production ability and keep the quality stable.

This month we shiped 4 sets of 1000HP land rig equipments to Russia. After we came back from Moscow oil & gas exhibition 2011,we get many orders from this region.

If you have any inquiry of shale shaker, mud clenaer, desander, desilter , decanter centrifuge, centrifugal pump, mud agitator, pls contact GN solids control.

Solids control service include but not limit to a list of service regarding to oil & gas drilling, such as

• Data reporting
• custom developed software (compatible with operators statuatory reporting obligations)
• monitor mud use and loss

  

• monitor gauge hole drilling
• monitor waste movements
• Drill cuttings project management
• cuttings skips logistics
• waste movements monitoring and reconciliation
• solids treatment and disposal
• Mud recovery (sludge gulper / liquid recovery unit / pressure washer)
• Pit cleaning (transfer pumps and pit cleaning squads)

Here is a list of solids control service companies in the world.

1 Baker Hughes Incorporated

Enhance drilling rig efficiency and improve fluid performance

Effectively removing solids from returned drilling fluid is vital to your drilling rig’s performance and, ultimately, the ability to achieve your drilling objectives. Having the right equipment to handle these solids is critical, if you want to enhance drilling rig efficiency and improve fluid performance.

2 Solids Control Services (SCS), specialises in the supply of high quality decanter-centrifuge based systems and associated contracting services, applicable to a broad spectrum of solids control and separation applications on a worldwide basis.

New and ever increasing environmental legislation increases the importance of employing efficient and reliable methods to meet waste reduction and minimisation targets.

Using SCS systems for the treatment of waste streams, whether from drilling operations or industrial processes, can render the constituents of those waste streams suitable for refuse, thereby reducing adverse environmental impact and the costs associated with waste disposal.

3 GN solids control just provide solids control equipments and technical support for solids control industry.

Continue reading “Top solids control service companies in the world”

If you have over 30 years experience for drilling, you will know, what is real required and what is not for close loop mud system. Sometimes people just seek for unrealistic specifications, which did not mean good for the operation. GN solids control would like to share your new idea about the drilling solids control, and put your idea into realization. We have the ability to design as your layout, no matter  you choose us as the complete system manufacturer or not.

Recently drilling has been changed a lot, the old experience did not work, people has their own new design. “Zero discharge mud systems” are urgently required because of the environment protection. Auger box, screw conveyor can be used to collect the drilling cuttings from shale shaker, desander, desilter, mud cleaner, dewatering unit and centrifuge, then transfer them to a catch pit for later processing. In some development company where the government did not have strict regulation on environment protection, they even do not use any mud system, and let the drilling fluids discharged directly. They may face big problem in the future.

Dewatering unit is required to work together with the system, it can make further process of the fluids after processed by centrifuge after the well is finished.

The mud tank is designed similar to 40 feet standard container, it is more convenient to transport in any countries in the world. All the lifting device, dimension, skid is same with container, and we put GN solids control equipments on top of it.

If you required Close Loop mud System for oil & gas drilling, pls contact GN solids control, our service including design, consultant, manufacture and shipment.

 

The mud tanks manufactured by GN solids control have been sold to more than 48 countries in the world, the application including oil & gas drilling solids control system, mud mixing system, mud storage, HDD mud recycling system, mining slurry separation system, etc.

Our mud tanks are including the following parts:

1 skid mounted mud tank

2 various pipelines

3 butterfly valve, flange, union, soft connector

4 Handrail, walkway, stairs, inner ladder

Now we will introduce various pipelines of mud tank system. Take a ZJ20 drilling rig solids control system as example.

1 mud cleaner pipelie

2 Mud pump suction pipeline

3 Mud mixing and weighting pipeline

4 overflow pipeline

5 Heating pipeline( only for low temperature drilling environment, such as Russia)

6 water manifold

7 Mud gun manifold

There is mud gun manifold for the whole system, and the mud gun involves all the tanks. Mediume pressure pipes connect tanks, which is sealed, reliable and convenient for installation and uninstall. The output manifold of mud pumps supply the entire mud manifold with mud fluid. Users can add input joint for mud medium pressure pipeline at the position showing in the figure.

Continue reading “Mud tank pipelines”

JBQ mud agitator is a part of solid control system of mud tank, which is mainly used in agitating and blending drilling fluid so as to control the depositions of solid particles in its tank cycling system and keep the mud property of circulation stable and mixture uniform.

GN solids control manufacture drilling mud agitator with various models, different agitator use different motor. The model we have now including JBQ5.5(7.5HP motor), JBQ 7.5(10HP motor), JBQ11(15HP motor), JBQ15(20HP motor), JBQ22(30HP).

Mud agitator is consist of gear box and motor, shaft, impeller, stabilizer( option), etc. Motor is a main part of drilling mud agitator. Usually we use explosion proof motorYB2 series for mud agitator.

The detailed model is:

5.5KW agitator motor:  YB2-132S-4

7.5KW  agitator motor    YB2-132M-4

11KW   agitator motor YB2-160M-4

15KW  agitator motor       YB2-160L-4

Continue reading “Drilling mud agitator motor”

Many of GN clients use Ditch Witch rig and buy mud cleaning system from GN. Unlike other China Solids Control companies, they mainly only focus on oil gas drilling multitank big system, GN Solids Control is the most professional for compact Mud System for HDD or CBM in China.

Ditch Witch complete directional drills package including directional drilling rigs, fluids management system, drill pipe, and integrated electronics that enable the tracker operator to disable power to the drilling unit’s thrust and rotation.  Ditch Witch compact directional drilling rigs are ideal for small contractors and designed for easy setup on jobsites once considered too tight for directional drilling.

GN Solids Control design and manufacture complete equipments for HDD (Horizontal

Directional Drilling) and CBM(Coal Bed Methane) drilling mud recycling system of :

150GPM / 350GPM / 500GPM / 800GPM / 1000GPM / 1500GPM /2000GPM.

GN150gpm mud system is specially designed for separating drilling cuttings from drilling mud within no dig processes. Due to the mini container dimensions, the mud recycling separation plant guarantees minimum setup times and an easy transportation. The mini system has been ready for operation on site and GN will dispatch engineer to provide first installation and commissioning to save customer’s time and connection work.

Continue reading “Ditch Witch rig mud cleaning system”