Jul 23

GN mud Agitators are manufactured in China facotry.But we offer worldwide sales and solids control oilfield service.

Buy mud Agitators from China manufacturer,Enjoy good quality,fast service,and best price.

Picture for Mud agitator

GN mud agitator

GN mud agitator

About GN mud agitator

GN company as a professional manufacturer for soilds control equipments, we have designed lots of high-quality products, and JBQ series Agitator is one of them. To keep both the mud uniformity and the suspension of solids, the mud agitator is used to agitate the mud consecutively and reliably.This agitator agitates the mud to make cuttings, silt and sand pass the solids control system without being precipitated onto the tank bottom. Due to the simplex turbine decelerator, this product is featured by compact construction, light weight, balanced transmission, low noise, high efficiency of transmission and strong agitating power. Therefore, it is a reliable product in the solids control system.

Buy China made mud agitator for drilling mud system from GN solids control

If you enjoyed this post, make sure you subscribe to my RSS feed!

written by GN solids Control \\ tags: ,

One Ping to “Mud agitator manufacturer”

  1. Agitator tank, agitator mixer Says:

    […] agitator mixer and agitator tank has been exported to more than 40 countries in the world, welcome to inquiry or […]


2 Responses to “Mud agitator manufacturer”

  1. 1. SUMIT CHATTERJEE Says:

    Please send a Detailed Techno-Commercial quotation for
    STAINLESS STEEL STORAGE / MIXING /HEATING TANKS, AGITATORS AS MENTIONED BELOW:-

    1. CLEAR LIQUID (MONO ETHYLENE GLYCOL)
    STORAGE TANKS 10,000 m³ VOLUME EACH * 2 NOS. SPECIFIC GRAVITY 1.112 TOP CONNECTIONS:-MANHOLE WITH COVER, RAIN PROTECTED ATMOSPHERIC VENTING ,
    INLET PIPE , CIRCULATION PIPE, NITROGEN PURGE PIPE, FLOAT TYPE LEVEL INDICATOR AND AT THE BOTTOM SIDE:- MANHOLE WITH COVER, OUTLET PIPE, DRAIN PIPE, LEVEL TRANSMITTER AND ONE TEMPERATURE INDICATOR AT SIDE MIDDLE

    2. CLEAR LIQUID (DI-ETHYLENE GLYCOL)
    STORAGE TANK 1000 m³ VOLUME SPECIFIC GRAVITY 1.115) TOP CONNECTIONS:-MANHOLE WITH COVER, RAIN PROTECTED ATMOSPHERIC VENTING, INLET PIPE , CIRCULATION PIPE, NITROGEN PURGE PIPE, FLOAT TYPE LEVEL INDICATOR AND AT THE BOTTOM SIDE:- MANHOLE WITH COVER, OUTLET PIPE, DRAIN PIPE, LEVEL TRANSMITTER AND ONE TEMPERATURE INDICATOR AT SIDE MIDDLE

    3. LIQUID MIXING (ETHYLENE GLYCOL CRUDE
    AND FRESH) TANK 120 m³ VOLUME EACH * 2 NOS. (SPECIFIC GRAVITY 1.112) TOP CONNECTIONS:-MANHOLE WITH COVER, INLET PIPE , NITROGEN PURGE PIPE, OFF GAS EXHOUST PIPE, FLOAT TYPE LEVEL INDICATOR AND AT THE BOTTOM SIDE:- MANHOLE WITH COVER, OUTLET PIPE, DRAIN PIPE, CIRCULATION PIPE, LEVEL TRANSMITTER AND ONE TEMPERATURE INDICATOR AT SIDE MIDDLE

    4. PASTE PREPARATION TANK
    (MONO ETHYLENE GLYCOL, PURIFIED
    TEREPHTHELIC ACID AND PURIFIED
    ISOPHTHELIC ACID)
    80 m³ VOLUME EACH * 2 NOS.
    SPECIFIC GRAVITY 1.35
    HANGING WITH SIDE SUPPORT. VERTICAL CYLINDRICAL WITH OVAL TOP AND BOTTOM, BUFFED INNER SURFACES, AND PROVISION FOR TOP MOUNTED AGITATOR AND BAG FILTER AT THE TOP, MANHOLE WITH COVER AT TOP, POWDER AND LIQUID INLET PORT AT TOP, OFF GAS TAKE OFF VIA BAG FILTER, LEVEL TRANSMITTER AND TEMPERATURE TRANSMITTER AT BOTTOM/SIDE

    5. SOLUTION STORAGE TANK (ANTIMONY
    TRIOXIDE IN MONO ETHYLE GLYCOL)
    60 m³ VOLUME
    WITH AGITATOR, VERTICAL CYLINDRICAL OVAL TOP WITH MS HEATING JACKET AND VENT PIPE (TO BE CONNECTED TO VENT HEADER), OUTLET PIPE AND DRAIN PIPE, INLET PIPE AND CIRCULATION PIPE CONNECTIONS.

    6. SOLUTION PREPARATION TANK (ANTIMONY
    TRIACETATE IN MONO ETHYLE GLYCOL)
    40 m³ VOLUME
    WITH HEATING JACKET AND AGITATOR (MOTOR 2.2 KW), VERTICAL CYLINDRICAL WITH OVAL TOP AND BOTTOM, POWDER BAG CHARGING SYSTEM, EXHOUST TO VENT HEADER, LIQUID INLET PIPE, OUTLET FROM BOTTOM AND CIRCULATION PIPES & LEVEL TRANSMITTER AND TEMPERATURE TRANSMITTER

    7. PACKED TOWER AS STRIPPER COLUMN (TO
    REMOVE LOW BOILING COMPONENT FROM REACTION
    WATER)
    25 m³ VULUME
    PACKINGS SS.
    SPRAY NOZZLE AT TOP
    FORCED AIR INLET FROM BOTTOM
    EXHOUST FROM TOP TO OFF GAS HEADER.
    BOTTOM OUTLET AND BOTTOM CHEMBER OVERFLOW OUTLET.

    8. SOLUTION STORAGE VESSEL (COBULT ACETATE
    IN MONOETHELENE GLYCOL)
    22 m³ VOLUME
    WITH AGITATOR, VERTICAL CYLINDRICAL OVAL TOP WITH VENT PIPE (TO BE CONNECTED TO VENT HEADER), OUTLET PIPE AND DRAIN PIPE, INLET PIPE AND CIRCULATION PIPE CONNECTIONS.
    LEVEL AND TEMPERATURE TRANSMITTER

    9. SOLUTION STORAGE TANK (STS IN MONO
    ETHYLENE GLYCOL)
    12 m³ VOLUME
    WITH AGITATOR, VERTICAL CYLINDRICAL OVAL TOP WITH VENT PIPE (TO BE CONNECTED TO VENT HEADER), OUTLET PIPE AND DRAIN PIPE, INLET PIPE AND CIRCULATION PIPE CONNECTIONS.
    LEVEL AND TEMPERATURE TRANSMITTER.

    10 SOLUTION PREPARATION VESSEL(COBULT
    ACETATE IN MONO ETHYLENE GLYCOL)
    11 m³ VOLUME
    WITH AGITATOR , VERTICAL CYLINDRICAL WITH OVAL TOP AND BOTTOM, POWDER BAG CHARGING SYSTEM, EXHOUST TO VENT HEADER, LIQUID INLET PIPE, OUTLET FROM BOTTOM AND CIRCULATION PIPES & LEVEL TRANSMITTER AND TEMPERATURE INDICATOR

    11. HOTWELL (TO RECEIVE VACUUM / PRESSURE REACTION GENERATED
    MONOETHELENE GLYCOL)
    9 m³ VOLUME EACH * 6 NOS HORIZONTAL CYLINDRICAL WITH OVAL SHAPED ENDS.
    OVERFLOW OF BIG CHEMBER WILL GO TO SMALL CHEMBER.
    BIG CHEMBER TO HAVE 5 DIP PIPES FOR INCOMING LIQUIDS, A LIQUID FILLING LINE AND A DRAIN.
    SMALL CHEMBER TO HAVE OUTLET/DRAIN PIPE.
    ONE MANHOLE WITH COVER ON BIG CHEMBER NEAR PERTITION,
    COMMON OVERFLOW LINE OF BOTH CHEMBER,
    LEVEL AND TEMPERATURE TRANSMITTER FOR SMALL CHEMBER.

    12. SOLUTION PREPARATION VESSEL
    (SOLUTION OF REACTION THERMAL STABILIZER IN MONO ETHYLENE GLYCOL)
    VOLUME 8 m³
    WITH HEATING JACKET AND AGITATOR (MOTOR 1.5 KW), VERTICAL CYLINDRICAL WITH OVAL TOP AND BOTTOM, POWDER BAG CHARGING SYSTEM, EXHOUST TO VENT HEADER, LIQUID INLET PIPE, OUTLET FROM BOTTOM AND CIRCULATION PIPES & LEVEL TRANSMITTER AND TEMPERATURE TRANSMITTER

    13. SEAL VESSEL(VACUUM)
    VOLUME 6 m³. EACH * 2 NOS
    HORIZONTAL CYLINDRICAL WITH OVAL SHAPED ENDS.
    OVERFLOW OF BIG CHEMBER WILL GO TO SMALL CHEMBER.
    BIG CHEMBER TO HAVE 5 DIP PIPES FOR INCOMING LIQUIDS, A LIQUID FILLING LINE AND A DRAIN.
    SMALL CHEMBER TO HAVE OUTLET/DRAIN PIPE.
    ONE MANHOLE WITH COVER ON BIG CHEMBER NEAR PERTITION,
    COMMON OVERFLOW LINE OF BOTH CHEMBER,
    LEVEL AND TEMPERATURE TRANSMITTER FOR SMALL CHEMBER.

    14. SEAL VESSEL(VACUUM) 5 m³ VOLUME EACH * 2 NOS.
    HORIZONTAL CYLINDRICAL WITH OVAL SHAPED ENDS.
    OVERFLOW OF BIG CHEMBER WILL GO TO SMALL CHEMBER.
    BIG CHEMBER TO HAVE 5 DIP PIPES FOR INCOMING LIQUIDS, A LIQUID FILLING LINE AND A DRAIN.
    SMALL CHEMBER TO HAVE OUTLET/DRAIN PIPE.
    ONE MANHOLE WITH COVER ON BIG CHEMBER NEAR PERTITION,
    COMMON OVERFLOW LINE OF BOTH CHEMBER,
    LEVEL AND TEMPERATURE TRANSMITTER FOR SMALL CHEMBER.

    15. SOLUTION STORAGE VESSEL
    1 m³ VOLUME * 4 NOS
    WITH AGITATOR, VERTICAL CYLINDRICAL OVAL TOP AND VENT PIPE (TO BE CONNECTED TO VENT HEADER), OUTLET PIPE AND DRAIN PIPE, INLET PIPE AND CIRCULATION PIPE CONNECTIONS 1 m³. SS SOLUTION STORAGE VESSEL

    16. SOLUTION PREPARATION VESSEL
    0.8 m³ VOLUME * 2 NOS.
    WITH AGITATOR , VERTICAL CYLINDRICAL WITH OVAL TOP AND BOTTOM, POWDER BAG CHARGING SYSTEM, EXHOUST TO VENT HEADER, LIQUID INLET PIPE, OUTLET FROM BOTTOM AND CIRCULATION PIPES & LEVEL TRANSMITTER AND TEMPERATURE INDICATOR

    FOR CAST STEEL STORAGE / MIXING /HEATING TANKS

    1. THERMIC FLUID DRAIN VESSEL
    VOLUME 3 m²
    HORIZONTAL CYLINDRICAL WITH OVAL SHAPED ENDS.
    VENT CONNECTED TO VENT HEADER.
    ONE MANHOLE WITH COVER.
    TWO INCOMING AND ONE OUTLET / DRAIN LINE.

    2. THERMIC FLUID EXPANSION TANK
    VOLUME 3 m³ * 2 NOS. REQUIRED.
    HORIZONTAL CYLINDRICAL WITH OVAL SHAPED ENDS.
    WILL BE USED FOR STORING OIL AT OVER 300 DEG.CENTIGRADE TEMPERATURE.
    VENT CONNECTED THROUGH FLAME ARRESTER.
    ONE MANHOLE WITH COVER.
    THREE INCOMING FROM BOTTOM AND ONE DRAIN LINE, ONE OVERFLOW LINE REQUIRED.
    LEVEL TRANSMITTER NITROGEN PURGE TYPE (DIFF. PR.) REQUIRED.

    3. CHILLED WATER EXPANSION TANK
    VOLUME 2 m³ REQUIRED.
    CUBICAL SHAPED
    VERTICAL CYLINDRICAL.
    WILL BE USED FOR CILLED WATER (+6 DEGRE C). ONE INCOMING FROM BOTTOM AND ONE DRAIN LINE, ONE OVERFLOW LINE, ONE MAKE-UP WATER LINE REQUIRED.
    LEVEL TRANSMITTER REQUIRED.
    ONE MANHOLE WITH COVER.

    4. COMPRESSED AIR BUFFER TANK
    VOLUME 3 m³ REQUIRED.
    VERTICAL CYLINDRICAL WITH OVAL TOP AND BOTTOM.
    WILL BE USED FOR COMPRESSED AIR (6 bar g PRESSURE).
    ONE MANHOLE WITH COVER, ONE INCOMING AND ONE OUTGOING LINE REQUIRED.
    PRESSURE GAUGE AND SAFETY VALVE REQUIRED.

    5. THERMIC FLUID EXPANSION TANK
    VOLUME 32 m³ REQUIRED.
    HORIZONTAL CYLINDRICAL WITH OVAL SHAPED ENDS.
    WILL BE USED TO ALLOW THERMAL EXPANSION OF THERMIC OIL AT OVER 300 DEG.CENTIGRADE TEMPERATURE.
    VENT CONNECTED THROUGH FLAME ARRESTER.
    ONE MANHOLE WITH COVER.
    THREE INCOMING FROM BOTTOM AND ONE DRAIN LINE, ONE OVERFLOW LINE REQUIRED.
    LEVEL TRANSMITTER NITROGEN PURGE TYPE (DIFF. PR.) AND TEMPERATURE TRANSMITTER REQUIRED.

    6. COLLECTING VESSEL FOR LAW BOILERS
    VOLUME 0.2 m³ REQUIRED.
    VERTICAL CYLINDRICAL WITH OVAL TOP AND BOTTOM..
    WILL BE USED FOR COLLECTING LOW BOILING FLUIDS (AFTER COOLING) OF THERMIC FLUID SYSTEM. ONE INCOMING FROM TOP, ONE VENT LINE AND ONE DRAIN LINE REQUIRED.
    ONE INSPECTION HOLE WITH COVER.
    .
    7. . VENT VESSEL
    VOLUME 0.1 m³ * 4NOS. REQUIRED.
    VERTICAL CYLINDRICAL WITH OVAL TOP AND BOTTOM.
    WILL BE USED FOR VENTING OF THERMIC FLUID SYSTEM. ONE INCOMING FROM BOTTOM AND ONE VENT LINE REQUIRED. THERMIC FLUID AT 350 DEGREE C WILL FLOW THROUGH IT.
    ONE INSPECTION HOLE WITH COVER.

    8. THERMIC FLUID STORAGE / COLLECTION TANK
    VOLUME 135 m³ * 2 NOS. REQUIRED.
    HORIZONTAL CYLINDRICAL.
    WILL BE USED FOR STORING AND EMERGENCY DRAINING (THROUGH COOLER) OF THERMIC FLUID SYSTEM. STEAM HEATING COIL REQUIRED AT BOTTM. SEVEN NOS. OF INCOMING AT TOP AND ONE OUTLET AND ONE DRAIN REQUIRED AT BOTTOM.
    ONE INSPECTION HOLE WITH COVER AT TOP.

    9. .THERMIC FLUID INTERMEDIATE STORAGE / COLLECTION TANK
    VOLUME 30 (?) m³ REQUIRED.
    CUBICAL SHAPED.
    WILL BE USED FOR DRAINING OF THERMIC FLUID SYSTEM FROM CIRCULATION PUMPS AND FILTERS.THREE NOS. OF INCOMING AT TOP AND ONE OUTLET REQUIRED AT BOTTOM.
    ONE INSPECTION HOLE WITH COVER AT TOP.

    ALUMINIUM STORAGE SILOS AS MENTIONED STORAGE SILOS AS MENTIONED BELOW:-
    1. PURIFIED TEREPHTHELIC ACID STORAGE SILO
    HIGH SCHEDULE POWDER STORAGE SILO VOLUME 2000 m³
    VERTICAL CYLINDRICAL WITH CONICAL BOTTOM, BUFFED INNER SERFACES AND WITH TOP MOUNTED BAG FILTER, , POWDER INLET PROVISION FROM TUBE CONVEYOR, OUTLET PORT AT BOTTOM TO ENABLE 1.2 METRIC TON / MIN. POWDER FLOW WITH NITROGEN PURGING SYSTEM TO ENSURE SMOOTH OUTLET FLOW.

    2. PURIFIED ISOPHTHELIC ACID STORAGE SILO
    HIGH SCHEDULE POWDER STORAGE SILO VOLUME 300 m³
    VERTICAL CYLINDRICAL WITH CONICAL BOTTOM, BUFFED INNER SERFACES AND WITH TOP MOUNTED BAG FILTER, , POWDER INLET PROVISION FROM TUBE CONVEYOR, OUTLET PORT AT BOTTOM TO ENABLE 1.2 METRIC TON / MIN. POWDER FLOW WITH NITROGEN PURGING SYSTEM TO ENSURE SMOOTH OUTLET FLOW.

    3.CHIPS INTERMEDIATE STORAGE SILO
    VOLUME 15 m³ EACH * 2 NOS.
    VERTICAL CYLINDRICAL WITH CONICAL BOTTOM, BUFFED INNER SERFACES WITH M.S. JACKET FOR STEAM HEATING.
    AIR DISTRIBUTION ARRENGEMENT AT BOTTOM FOR HOT AIR CIRCULATION.

    4.CHIPS STORAGE SILO
    VOLUME 2000 m³ EACH * 8 NOS.
    VERTICAL CYLINDRICAL WITH CONICAL BOTTOM. BUFFED INNER SURFACES. KNIFE GATE VALVE AT BOTTOM. CHIPS INCOMING THROUGH PNEUMATIC CONVEYING. CHIPS OUTFLOW TO A SEMIAUTOMATIC BAGGING SYSTEM FOR FILLING JUMBO BAGS / CONTAINER.

    AGITATORS. DETAILS GIVEN BELOW:-

    1. AGITATOR FOR CATALYST SOLUTION PREPARATION VESSEL.
    (ANTIMONY TRIACETATE IN MONO ETHYLE GLYCOL)
    POWER 2.2 KW
    VESSEL VOLUME 40 m³. VESSEL HAS HEATING JACKET,
    THE VESSEL IS VERTICAL CYLINDRICAL WITH OVAL TOP AND BOTTOM.

    2. AGITATOR FOR STABILIZER SOLUTION
    PREPARATION VESSEL.
    (REACTION THERMAL STABILIZER MIXING IN
    MONO ETHYLENE GLYCOL)
    POWER 1.5 KW
    VESSEL VOLUME 08 m³. VESSEL HAS HEATING JACKET,
    THE VESSEL IS VERTICAL CYLINDRICAL WITH OVAL TOP AND BOTTOM.

    3. AGITATOR FOR ADDITIVE SOLUTION
    PREPARATION VESSEL.
    (ADDITIVE MIXING IN MONO ETHYLENE GLYCOL)
    POWER 1.5 KW
    VESSEL VOLUME 11 m³. THE VESSEL IS VERTICAL CYLINDRICAL WITH OVAL TOP AND BOTTOM.

    4. AGITATOR FOR TONER SUSPENSION
    PREPARATION VESSEL.
    (BLUE TONER SUSPENSION IN MONO ETHYLENE
    GLYCOL)
    NUMBER OF AGITATOR REQUIRED 02
    POWER 0.3 KW EACH
    VESSEL VOLUME 0.8 m³ EACH. THE VESSELS ARE VERTICAL CYLINDRICAL WITH OVAL BOTTOM

    5. AGITATOR FOR TONER SUSPENSION
    STORAGE VESSEL.
    (BLUE TONER SUSPENSION IN MONO ETHYLENE
    GLYCOL)
    NUMBER OF AGITATOR REQUIRED 02
    POWER 0.3 KW EACH
    VESSEL VOLUME 01 m³ EACH. THE VESSELS ARE VERTICAL CYLINDRICAL WITH OVAL BOTTOM

    6. AGITATOR FOR TONER SUSPENSION
    STORAGE VESSEL.
    (RED TONER SUSPENSION IN MONO ETHYLENE
    GLYCOL)
    NUMBER OF AGITATOR REQUIRED 02
    POWER 0.3 KW EACH
    VESSEL VOLUME 01 m³ EACH. THE VESSELS ARE VERTICAL CYLINDRICAL WITH OVAL BOTTOM

    Thanks & Regards

    Sumit Chatterjee
    Hambana Petrochemicals Limited
    Regent Building,
    345, R A De Mel Mawatha,
    Colombo 03
    SRI LANKA

  2. 2. aquaion technology inc Says:

    Dear mr.sumit cgettareji ,with refereence to your inquiry & our quatation for OBR-2500 water softening plant AND OBR -300 DM plant .subject to your maail massage before one week ago your mail massage ,we like to draw your attaention about that AT PRESENT I AM AT SRILANKA FOR 22ND march 2013 EVENING. if like to our personal meeting pl.c we like all us +94 771001318

    for aquaion technolog in
    narendra patel

Leave a Reply