Month: November 2009

HDD mud system and equipments are becoming a very important market for GN Solids Control, China  leading manufacturer  specializing  in complete line of  equipments for drilling mud system.GN Drilling mud equipments are widely used in oil & gas drilling,and HDD mud system.

Australian HDD drilling company inquiry for mud system

:
Can you please supply me pricing on your HDD horizontal directional drilling mud tank systems.
I am looking for small units that will clean 130 gal and larger units to clean up to 1000 gal per minute.

Indonesia HDD drilling contractor for mud system:

My Company is Contractor Horizontal Directional Drilling(HDD).I Am interesting with MUD Cleaner ZQJ250×100B.Please quote me and send information about this product to my Email.

Nice to hear your voice in phone. Thankyou for your quotation. As per our inquiry, I want to order completed this Solid system. Here, I attached the system from Mud Tech. The system consist of, mud shale shaker, desander, desilter, mud tank, mixing system, generator set, hopper etc. I hope you have the equivalent product, with the same capasity, realibility and performance. But I dont want skid mounted, and the system can do disassembly.

I hope you can submitted to me your quotation that equivalent product and performance.

After two days discussion,the Indonesia clients are going to order a complete HDD mud system from us in next week.

Today,A client inquired us for Drilling rig 750 HP  Mud handling equipment

Mud gas separator (poor boy  degasser)

Capacity :  1.56 M3.

Mud Degasser handling gas in mud
1 EA. ZCQ1.5/5 Vacuum degasse
Type/size centrifugal pump: 2″X1.1/2″
Driven by electric motor
50 HZ.   –   22 KW.   –    380/660 V.

Drilling Mud system
Mud pumps
1 EA. Mud pump  –  SI PETRO.  –  CHINA.
3NB-500 mud pump
Max. flow rate: 4000 PSI.

2 EA. Mud Mixing pumps
Driven by motor : 73 HP.

1EA. Transfer pumps

SIZE : 2.1/2″ SHAFT. – 4″X3″X13″ CASING.
Driven by motor: 50 HP.

Mud tanks system
3 EA.  mud tankS
TOTAL VALUME : 167m3
DIMEN.: 12500×3200×3100mm

ACTIVE MUD TANK
Total capacity : 133 BBL.

Reserve
Total capacity  : 400 BBL.
W./MISSION PUMP 2500 4″X3″X13″ – 2.1/2″ SHAFT.

Sand trap
1 EA. sand pump
capacity : 40 BBL. Continue reading “Mud handling equipment for 750 HP rig”

A Client from Venezuela wants to establish shale shaker screens factory with us.They are doing solids control equipments,and drilling mud system rental service.

About our shaker screens:

Inquiries as below:

We are looking the viability to establish a screen factory in Venezuela to supply screens to PDVSA and the local companies.

We are interested to receive information if your company could be interested on this national and socialist project. The actual exchange controls in the country is oriented to promote and increase the local production, we have a group of investors interested to participate on this Oil & Gas area project and are looking for the engineering project and the properly machinery, Venezuela have local suppliers for aluminum and steel that represent an advantage for the necesary base material.
We have experience on solids control equipment rental and repair of the traditional brands like: Derrick, Swaco, Brandt, Double life, Triton, etc.

Desander from Derrick,MI-Swaco,NOV Brandt are famous and widely used in drilling mud systems.

GN Desander is China typical hydrocyclone for drilling fluids solids control,As a top China Desander manufacturer,our Desander has the following benifits

1,Customized enough for almost any drilling situations.
2,Competive Price desander replacement for Derrick,Mi-Swaco,Nov Brandt desander
3,Oilfield projects proven efficient desanders
4,Fast and reliable service for desander spare parts.
5,Top quality shaker vibrating motor.

Contact to learn more about GN desander.

MI-Swaco Desander

The M-I SWACO D-SANDER* Models 2-12 and 3-12 are designed for high-volume continuous removal of sand and abrasive cuttings from drilling fluids — 95% of all particles to 74 microns and more than 50% of particles to 40 microns. The D-SANDER features your choice of two or three 12-in.- (304.8-mm-) diameter replaceable, wear-resistant, polyurethane hydrocyclones and quick-release stainless steel clamps for simplified changeout. They are a fundamentally important piece of a rig’s complete solids control package. They also help limit repair and replacement of pump parts damaged by abrasives-laden drilling fluids.

MI-Swaco desander models:

Name     Function/Application

2-12 SLANT D-SANDER     2-12 Slant-Mount D-SANDER
2-12 VERTICAL D-SANDER     2-12 Vertical-Mount D-SANDER
3-12 SLANT D-SANDER     3-12 Slant-Mount D-SANDER
3-12 VERTICAL D-SANDER     3-12 Vertical-Mount D-SANDER

 

 

NOV Brandt Desander

Desander, as stated earlier, have no moving parts. The larger the internal diameter (ID) of the desander is, the greater the amount of fluid it is able to process and the larger the size of the solids removed. Desanders (10 in. ID) are able to remove roughly 50 percent of those solids within the 40-50 micron range at a flow rate of 500 gallons per min (gal/min), while desilters (4 in. ID) are able to remove approximately 50 percent of those solids within the 15-20 micron range at a flow rate of 60 gal/min. Microfine separators (2 in. ID) are able to remove around 50 percent of those solids within the 10-15 micron range at a flow rate of 15 gal/min. Desanders are typically positioned next-to-last in the arrangement of solids control equipment, with mud decanter centrifuges as the subsequent processing unit. They are preceded by gas busters, gumbo removal equipment (if utilized),fluids  shale shakers, mud conditioners (if utilized) and degassers.

NOV® Brandt® manufactures desander in Conroe, Texas, USA. desanders are typically configured to meet the specifications demanded by the application. Usually, the desired flow rate determines the configuration of the cones, including the size utilized. desanders are just one of the many solids control and waste management offerings that NOV Brandt supplies to the oil and gas industry. NOV Brandt’s Quality Management System is ISO 9001-2000 certified.

Tri-Flo drilling mud system ranges from  1200,1500,2500,4000,7000 Gallon,they are usually for HDD drilling mud cleaning.

GN Solids Control offers customized drilling mud system from small tank system to large tank system similar like the Tri-Flo rangles for HDD.

Learn more:HDD mud system

• Tri-Flo 1200 Gallon mud system
  

  

Tri-Flo 1200 Gallon Mud SystemThe equipment is based upon the highly successful Tri-Flo 1200 Gallon Mud System which has the following advantages:

Drilling mud equipments:

Pre-screening of the returned mud using a Tri-Flo 123 Shale Shaker.

Secondary cleaning of the returned mud using a Tri-Flo 4 x 4″ Mud Cleaner.

Integral mixing system using a Tri-Flo 3″ Jet Mixing Hopper.

A total of 1200 US gallons (4,500 litres) is provided, with a division separating the clean mud from the dirty mud in the ratio 60:40.
This provides the optimum balance for most drilling operations.

Output: Up to 150 USgpm (560 litres/min)

Cut Point: 16 microns

Dimensions: 3700L x 1900W x 2800H. 2750kg weight(empty)

Capacity: 1200 US gallons (4,500 litres)

Pumps: Two 2” x 3” centrifugal pumps with 7.5kW motors. A power socket for a third pump is provided.

Power: Integral control panel for all electrical functions. Generator required, approx 50-kVA

• Tri-Flo 1500 Gallon Mud System

Pre-screening of the returned mud using a Tri-Flo 123 Shale Shaker.

Secondary cleaning of the returned mud using a Tri-Flo 4 x 4″ Mud Cleaner.

Integral mixing system using a Tri-Flo 3″ Jet Mixing Hopper.

A total of 1500 US gallons (5,700 litres) is provided, with a division separating the clean mud from the dirty mud in the ratio 60:40.
This provides the optimum balance for most drilling operations.

Integral charge pump to supply clean mud back to the drilling rig.

This provides a continuous supply of clean mud under pressure to the high pressure mud pump, avoiding problems of starvation and cavitation which can rapidly cause damage.

Specifications

Output: Up to 150 USgpm (560 litres/min)

Cut Point: 16 microns

Dimensions: 3850L x 1800W x 2862H

Capacity: 1500 US gallons (5,700 litres)

Pumps: Three 2 x 3″ centrifugal pumps with 5.5kW motors Continue reading “Tri-Flo Mud System 1200 to 7000 Gallon”

Mud system for 1000HP drilling rig is available from us with all equipments for complete drilling mud system.

Mud system for 1000HP drilling rig

1    MUD PUMPS
2 x 1000HP BOMCO Mud Pump Package Powered by one 1000HP 752 type series wound D.C traction motor

2    MUD TANKS
8 ? ‘H x 10’W x 47’L Mud Tanks (1500 BBLS). Thanks have necessary piping, valves, dump gates, & compartments. It can be expanded to (2000 BBLS)
3    MUD MIXING UNIT
Mud Mixes, super charging (6’ x 8”) pump driven by minimum 75HP electric motor. (Specify make & model of pump, drive, and impeller size)

4    PUMP MANIFOLD
“Pump manifold for two rig pumps for independent operation and full flexibility for
operating any pump while the other pump is isolated for repairs”
5   MUD AGITATORS
10HP motors. The mud system C/W 6” x 5” centrifugal pumps with 75HP motors

6  Mud  DE-SANDER
2- Cone Desander

7    DE-SILTER OR MUD CLEANER
10 Cone Desilter

8    Mud DEGASSER
Vacuum Degasser

9    SHALE SHAKERS
Linear Shakers    2

10    WATER TANK
One 9’H x 10’W x 45’L with two 2” x 3” centrifugal pumps.

11    RIG LIGHTING
“Vapor proof light rig lights and sufficient lighting for all work areas complete with
control panel.

12    MUD LINES
All necessary flow lines, manifolds, suctions, discharges, equalizers, safety valves, casing fill-up lines and water and air lines for rig-up
13    MUD SAVER
OTECO Mud Bucket with 5”, and 3 ? “ rubbers
“Two MUD SAVER Kelly valve for preventing loss of mud from Kelly while making
connections”

Besides 1000 HP Drilling rig mud,2000 HP,3000 HP,6000HP ect drilling rig mud system are available from GN Solids control.

Drilling mud decanter centrifuge is the fourth stage equipments for a drilling mud system.Drilling mud cleaning first stage uses drilling fluids shale shaker ,then second stage uses desander,third desilter,(now drilling mud cleaner is widely used to replace desander,desilter).

The drilling mud decanter centrifuges can separate fine particles well,for separating 5～7μm particles in drilling mud,usually use medium speed decanter centrifuge,for less then 2μm,usually use high speed decanter centrifuges.

Principle of Operation
Bowl Speed – Depending on the model specification, drilling mud decanter cenrifuges are equipped with either fixed or variable speed arrangement on the main drive enabling the operator to adjust the bowl speed between 1200 and 3850 rpm within a few seconds.  This option, combined with variable conveyor speed, gives a unique dimension to the use of decanters for drilling fluids treatment. The optimum speed for solids removal for a specific cut point depends on the composition of the drilling fluid and the nature of the drill cuttings.

Decanter cenrifuge Scrolling Speed
Decanters are equipped with either fixed or variable back drive. The scrolling speed -(relative conveyor speed) can be changed in a matter of seconds by operations of a simple control switch. The optimum scowling speed is selected in each case according to solids load, required separation efficiency and required underflow density.

Principle of Operation

Bowl Speed – Depending on the model specification, decanters are equipped with either fixed or variable speed arrangement on the main drive enabling the operator to adjust the bowl speed between 1200 and 3850 rpm within a few seconds. This option, combined with variable conveyor speed, gives a unique dimension to the use of decanters for drilling fluids treatment. The optimum speed for solids removal for a specific cut point depends on the composition of the drilling fluid and the nature of the drill cuttings.

Scrolling Speed – Drilling mud Decanter centrifuges are equipped with either fixed or variable back drive. The scrolling speed -(relative conveyor speed) can be changed in a matter of seconds by operations of a simple control switch. The optimum scowling speed is selected in each case according to solids load, required separation efficiency and required underflow density.

Feed Rate – In general a single drilling fluid decanter is capable of a process feed rate of up to 200 gpm. The treatment capacity is influenced by mud type and mud rheology. On drilling rigs it is common to utilize a minimum of two decanters installed in tandem for low weight muds and in series on high-density muds where barite recovery is necessary.

GN solids control based in China manufacture and supply complete line of high-speed, variable-speed and fully variable-speed drilling mud decanting centrifuge for handling drilling fluids. Our factory and company are Quality Management System ISO 9001-2000 certified.GN solids control operate international oil gas drilling mud separation system。 Ruggedly built for oilfield and industrial Solids control service, decanting centrifuge is especially effective in meeting fluid-on-cuttings discharge requirements in environmentally sensitive areas. decanting centrifuge also deliver high fluid recovery rates and efficient solids control to significantly reduce the operator’s total mud cost and limit waste disposal volumes.GN-China leading decanting centrifuge manufacturer.

ZJ drilling series drilling mud recycling system manufactured by GN Solids Control can march all ZJ series drilling rig.GN Solids Control is 1 of top10 China drilling mud equipments manufacturer.

ZJ drilling rig are the models of Chinese made drilling rig,GN Solids Control Mud circulation system for ZJ Drilling rig as below:

• ZJ Deep well drilling rig mud system:

  

·  ZJ90/6750DB DRILLING RIG
·  ZJ120/9000DB DRILLING RIG

• ZJ70 drilling mud solids control equipments:

·  ZJ70/4500DB TRACK MODULAR RIG
·  ZJ70/4500LD Drilling Rigs
·  ZJ70/4500L Drilling Rigs
·  ZJ70/4500DS Desert Drilling Rigs
·  ZJ70/4500D Drilling Rigs

• ZJ50 drilling mud recycling system:

·  ZJ50/3150L Drilling Rigs
·  ZJ50/3150D E-Drive Drilling Rigs

• ZJ40 drilling mud solids control equipments:

·  ZJ40/2250T9 Drilling Rigs
·  ZJ40/2250LT Drilling Rigs
·  ZJ40/2250L1 Drilling Rigs
·  ZJ40/2250L Series Drilling Rigs
·  ZJ40/2250DB Drilling Rigs

• ZJ30 drilling mud circulation system:

·  ZJ30/1700JD Drilling Rigs
·  ZJ30/1700DZ Drilling Rigs
·  ZJ30/1700B Series Drilling Rigs
·  ZJ30/1700 Drilling Rigs

• ZJ20 drilling mud solids control system:

·  ZJ20/1350ZDB Drilling Rigs
·  ZJ20/1350Z Truck-Mounted Drilling Rigs

• Other drilling mud circulation system for drilling rig.

·  ZJ15X Slant Hole Drilling Rigs
·  ZJ15/900DB-1 Drilling Rigs
·  ZJ10/585 drilling rigs
·  1500m Drilling Rigs

To the specifications and design of ZJ series drilling mud circulation system,and the marched drilling mud equipments,please contact GN Solids Control sales team.Cost-effective mud equipments and system from GN Solids Control.

Shale shaker,desander,sand pump,and decanter centrifuge are main equipments for drilling mud solids control,the flowing is the report of using conditions for 13 oil wells.

• Drilling fluids shale shaker

In 13 oil wells, 5 wells use ZS2×1.15×2/3P low-frequency shale shaker, two wells teams using QGZS-G4 Ⅱ high frequency shale shaker, six wells teams using the DHL-1 high-frequency shale shaker. Accounted for using the number of high-frequency screen 61.5%, compared with last year have more greatly enhanced. One QGZS-G4 Ⅱ high-frequency shale shaker for the newly introduced, are used in good condition.

• 2, Desander

In 13 oil wells, 5 wells teams using the NCS-300 × 2-type Desander, two wells teams using ZCSQ-250×2-type Desander, six wells teams using the ZQJ-250 ×2-type Desander; accounting for the use of the number of 38.46% and 15.39%, 46.15%. Compared to last year, not the magnitude of changes, only to add two new Desander use.

• 3, Sand pump

In 13 oil wells a total of 12 teams use the SB-200 wells electric sand pump, a well teams using the SB-6″×8″ electric sand pump. Compared with last year, out of the belt transmission-type sand pump at the same time, the introduction of a new type of mechanical seal type sand pump.

• 4,Decanter centrifuge

After many years of practical use and continuous upgrading of the decanter centrifuge has been raised from a variety of models of multiple manufacturers into a relatively neat two manufacturers of the three models (which LW450×1000-NJ-type centrifuge at the end of March 2003 to replace eliminated); separation factor reached 800 or more, speed at 1800r/min above are more capable in  separating Sand, but also  facilitate equipment maintenance and management.

An old customer asked us to supply the PNEUMATIC SPINNING WRENCHES for his oilfield service.Though the client know the contact info of the PNEUMATIC SPINNING WRENCHES manufacturer,but he gives us their contact info and ask us to buy and sell to them.

This is really what we call trust!!

Q254-250 PNEUMATIC SPINNING WRENCHES

The wrench is the best replacement of rotary rope (or chain). It is applied for the mechanized spinning operation. The applicable range of pipe diameter is wide, and it can be freely adjusted whenever necessary. There are two configurations for clamping mechanism: air tyre and air cylinder. There are two driving and controlling styles: pneumatic and hydraulic. The spinning wrench is designed and manufactured according to API Spec 7K “Specification for Drilling Equipment

As a solids control equipments to manufacturer,we keep giving our clients reliable service.And now we even win the trust of our customer for PNEUMATIC SPINNING WRENCHES.