We manufacture linear motion shale shaker for drilling fluids solids control,

Buy  now :linear motion shale shaker

Linear Motion Shale Shaker is mainly used for the first phase drilling liquid purification. The shale shaker uses two motors vibrate in-phase for separation. The electric vibrator and the electric equipment in the electric control system are importedexplosion proof appliances. The screen area is big, the capacity high and the screening efficiency high. The linear motion shale shaker track quickens the discard and improves screen efficiency. The basket can be adjusted to different angles tocope with different environments and drilling liquid conditions. The screen is durable and easy to install and maintain.
linear motion shale shaker photo:

Linear motion shale shakerChina manufacturer GN Solids Control offer the world with drilling mud shale shaker equipments.We are an exporter of drilling fluid shale shaker for Indian, Russian,middle east.etc.Oilfield Company of the United States and

Why buy linear motion shale shaker from GN solids control? Continue reading →

Mechanical Treatment for drilling fluids solids

The present solids control system use Mechanical Treatment for drilling fluids solids

Buy  Solids control Equipments from China manufacturer.

This is the method of mechanically removing solids using shale shakers or hydrocyclone devices such as; desanders and desilters. Each piece of equipment is general limited to the following range of particle removal:
1.    Standard shale shaker – 440 microns or larger (also referred to as the scalping shaker)
2.    Fine screen shaker – 74 microns or larger
3.    Desanders – 100 microns & larger
4.   Desilter – 15 microns & larger Continue reading →

Solids Control Closed Loop Systems manufacturer

GN  Solids Control Closed Loop System is also called fluids processing system,it  consist of a  mud Tank, Shale Shakers, Mud Cleaners, Agitators, Centrifuges and Pumps. All this equipment is mounted on  tank and can be setup in a matter of hours once onsite. Rig up time and expenses are drastically reduced by our quick pin installation.  Equipped with Shale  shakers, Desilter and Desander cones are mounted over the shakers to produce The Ultimate Mud Cleaner.  Adding the decanting Centrifuges on the tank allows us to remove solids from all recovered mud and also on the active mud system.

Solids control closed loop syste

Advantages of GN Solids Control Closed Loop Systems

  OUR People!  We provide fully trained Operators with many years of experience in Closed Loop Operations.

  Reduce the cost on each well by the Thousands!

  Solids are dried to the maximum efficiency

  Solids are removed with the highest efficiency

  Reduce haul off and dilution to the mud systems

  Environmentally friendly solids control closed loop system

  Reduce the number of low gravity’s to produce a lower mud cost and reduce pump repairs

  Significantly reduces the amount of time and cost to get setup

Best Price Solids Control Closed Loop Systems

Moreover,as a China solids control closed loop system manufacturer,we are located in  China iron production City-Tangshan.The price of raw material here is very low and with high quality.There are also many experienced workforce in iron machine production.They work very efficiently. Moreover,we control production cost well by outsourcing some processing work.Your best  Solids Control Closed Loop Systems manufacturer and supplier.

Instead of a collection of equipment from various sources, the GN Drilling mud processing  is a field-proven network of solids-control components specifically designed to function as a single unit.

Download driling mud processing equipments now:Solids control equipments system Continue reading →

Drilling fluids circulaion system is also Called solids control system,Drilling fluids processing system.GN is a China based drilling fluids Drilling fluids circulation system manufacturer

Drilling fluid is classified as water base utilizing water as the liquid phase. The solid phase of any drilling fluid is either commercial solids or drilled solids. Most commercial solids such as bentonite have a relative particle size of less than one micron. (.000039 inches).

Drilled solids are those particles that enter the mud system in the form of cuttings from the bit or back reamer or from borehole debris. These solids vary in size from less than one micron & larger depending on the carrying capabilities of the drilling fluid. Note that spindle speed and the amount of push or pull force require to drill play an important factor on the particle size of the cuttings. Continue reading →

Solids removal system manufacturer

GN-Solids control  is a China solids removal system manufacturer.We manufacture all the equipments for solids removal system

Solids control factory

Continue reading →

oilfiled solids control system future
We supply oilfield solids control system from our China factory to worldwide customer.
Now below we share info. about oilfiled solids control system future

The future path of solids control systems will continue to increase the overall removal efficiency of undesirable solids from the drilling mud. This will include continued improvements in shale shakers and screen life. Research investigating alternate technology such as using vacuum degasser techniques and different motions may prove more effective in the future.

GN solids control system

Continue reading →

State of arts and future for solids control

Buy Solids control equipments here:Mud Cleaner,desander,desilter ect.

Solid control state of the art:
The state of the art solids control systems includes improved versions of this original equipment, first introduce into the oil industry many years ago. Although much more efficient and robust the core technology has change little over the past few decades.

Future of solids control system
The future path of solids control systems will continue to increase the overall removal efficiency of undesirable solids from the drilling mud. This will include continued improvements in shale shakers and screen life. Research investigating alternate technology such as using vacuum techniques and different motions may prove more effective in the future. Continue reading →

GN solids control search some info. from internet and share with people who are in oilfield industry.By the way,we are a China manufacturer of solids control drilling mud circulation system.We provide the whole series of solids control equipments.

Solids control system history

Drilling fluid maintenance cost, clean up & disposal cost as well as the over all cost of boring, can be reduced dramatically when proper solids control techniques are utilized. These facts were recognized in the oil industry in the
late 1800’s. When open earthen pits we used to separate the cuttings from the borehole. This was accomplished by a series of weirs and settling pits that allowed the solids to naturally settle out by using gravity. The clean mud
then flowed into a suction pit to be re-pumped down hole. This was the first solids control technique ever used. Continue reading →

GN solids control want to find sole (exclusive) agent for our system and equipments.

I talked with gn solids control  team today.We are very glad to find  exclusive agent (sole agent) for our solids control system and products around the world.
But firstly,you purchase one solids control system from us firstly to make us understand each other well.If it goes well,then we can get into sole agent contract.
At present,if you need the draft contract of sole agent in your country.we can prepare one for you.But we sign a formal one when it is the right time to get into solids control equipments and system sole agent.

GN Solids Control

We will help you in 3 main ways. Continue reading →