Month: March 2010

Oil and natural gas corp. today declared the finding of three oil and gas this month, it has approved that they would invest Rs 3241 crore in developing Cluster-7 marginal fields in the western offshore.

ONGC said it discovered gas in a well drilled in East Godavari district in Andhra Pradesh. Oil and gas in a separate well in shallow waters off the Andhra coast.

Besides oil was discovered in Gujarat block, a company press statement.But ONGC did not give estimation of it.

To invest the discovered oil, the company board approved a capital expenditure of Rs 3241.03 in the first phase of development.

In the first phase, they plan to install four new fixed well platforms and drilling of 20 development wells from which the cumulative production of oil and gas for 16 years. And the production is expected to be 9.73 million tons and 4.52 billion cubic meters.

In their plan, the project is completed in 35 months later, and the first oil is expected in March,2010.

GN solids control, as an leader of the oil and gas associated industries, is very exciting to hear this, as the price of oil and gas is rising all the time, more exploitation is really needed.

As we all know, the urgent demand of oil and gas inspire the exploitation and drilling and also the solids control etc. In GN solids control, we only produce top quality products, and we really welcome the customers all over the world which needs solids control.

Libya clients mud system requirements,this is continued wit Mud gas separator & Trip tank skid

New Bomco F-1000 single acting triplex mud pump complete.New Bomco F-1000 single acting triplex mud pump complete with:

Rated power:1000hp
maximum speed:120rpm(at crankshaft)
stroke length:10”
fully enclosed machined and fabricated steel main frame
main frame with access covers over crosshead
area and inspection doors on each side
double helical pinion shaft and bull gear
machined forged steel crankshaft
self-adjustable and replaceable crosshead guides
individually forged steel interchangeable fluid end modules with quick change valve pot covers
new Ensco liners, pistons, polyurethane valves and seals
oil bath and positive flow lubrication system
suction and discharge manifolds
new bomco pulsation dumpner,5000 psi maximum
service pressure, 20-gallons surge capacity, 4” api 5000 ring joint connection Continue reading “BOMCO F-1000 single acting triplex mud pump”

The Mud gas separator & Trip tank skid is continued with Mixing and reserve mud tank about our proposal to a Libya drilling company.

Following is clients requirements for Mud gas separator & Trip tank & Choke Manifold skid

1-      10’ x 40’ oilfield type skid with loading hitches for tail boarding and provisions for mounting of choke manifold.

2-      60 bbls trip tank 8’ long x 10’ wide x 8’ manifold high

one (1) 10 hp agitator

two (2) 3’’ x 2’’ centrifugal pump with mechanical seal for trip tank. pump to be powered by a 25 hp, 1800 rpm, 480 volt, 3- phase, 60 hz x pac motor.

3-      mud gas separator to be 2.5’ x 20’. unit will separate mud and vent gas. unit will fold over the top of the choke manifold.

4-      one (1) 4’’,  5000#, 2-1/16’’ choke manifold complete with one (1) 5- way cross, eight (8) 4-1/16’’ x 5000# gate valves, one (1) Continue reading “Mud gas separator & Trip tank skid”

The Introduction of Mud Control Equipment

Mud Control Equipment, usually referred as solids control system or solids control equipment. It contains shale shakers, sometime rig shakers, mud cleaners, decanting centrifuge and so on. In G.N. China, we always supply Fluids Processing System Shale Shaker Mud Cleaner Desander  Desilter Decanting Centrifuge Vacuum Degasser, Sand Pump, Mud Gas Separator, Jet Mud Mixer, Mud Agitator, Shear Pump, Submersible, Slurry Pump, Flare Ignition Device, Mud Gun, Mud Tank, Oilfield Equipment Parts,

G.N. China is One Famous Mud Control Equipment Manufacture

GN Solids Control-Tangshan Guanneng Machinery Equipment Co., Ltd. Is a China  leading manufacturer  specializing  in complete line of  equipments for mud control system.GN Drilling mud equipments are widely used in Oil & Gas Drilling , HDD Mud System and Slurry Separation Plant.

If you want to know why is removing solids from drilling mud so important, we can get more questions, but these questions help us to solve this question.

Firstly, we should know where is the solids from.

HA, when we drilling, the drilling mud take them out.

What is the mud’s function?

OK, so we get one more question, what the mud do in solids control system, i.e. what is the mud’s function. You can see How Drilling Mud Work In Solids Control System And Drilling Rig that I write before. I will list the main function again:

Remove cuttings from well
Suspend and release cuttings
Control formation pressures
Seal permeable formations
Maintain wellbore stability
Minimizing formation damage
Cool, lubricate, and support the bit and drilling assembly
Transmit hydraulic energy to tools and bit
Ensure adequate formation evaluation
Control corrosion (in acceptable level)
Facilitate cementing and completion

And then we can find the answer: We must get high quality drilling mud to ensure the drilling process.

COST of drilling mud and environment friendship

But why don’t we produce some new mud, here we go, I have the same question.

The answer is only one word—COST. The cost of produce new drilling mud is higher than this, it is just an economic choice.

Removing solids from drilling mud limit the cost and what’s more important, it’s good to the environment.

Oil and Gas Drilling, Summarize in 2009 All Around the World

1.American Drilling Drops

American drilling drops, due to weak demand and lower prices. The price of oil and gas has fallen to two thirds of their summer 2008 levels. It’s unprofitable for many oil and gas producers. So many of them, cut back on oil and gas production also the investments.

2.Russian Drilling Increases

Oil prices in the second quarter amounted to over $ 60 a barrel. In response to growing international drilling company, Halliburton (HAL), Weatherford International (WFT) and Schlumberger NV(SLB). In particular, the company Halliburton (HAL) reported 27% growth in sales in Russia and a double-digit growth in Mexico, Norway and China.

3.Complex Africa

It helps that the area is geologically complex; with many quarries and offshore oil probably deep underground. Or that many countries have seen deposit wars and unrest. Somalia remains a non-go zone, Ethiopia and the Ogaden region in the east is a violent uprising against insurgents fighting. And during the civil war in Mozambique ended in 1992, it took time for them to fully recover.

Saliva Explorers mainly on prospects for peace in Somalia. Stocks in oil block licenses for two small oil companies, Africa and Oil Range Resources will hold 10 billion barrels. Nobody talks about oil production in Somalia in the near future, but analysts believe that oil companies may be less intimidated by the political risks that would be in the past.

They point to the oil production in southern Sudan, where the risk of a 20-year civil war ended in 2005, to be rekindled.  In any case, there is a feeling that is to discover,  said Aly Khan Satchu, a financial adviser who manages Rich management in Nairobi. The reality and the perception of risk can be reduced.

4.TO See How GN Solids Control Behave in 2009

We’d Like to Invite you See “GN Solids Control” at following exhibition:

• Exhibition name:The 10th China International Petroleum & Petrochemical Technology and Equipment Exhibition(CIPPE)

  

• Exhibition Period:March 22-24,2010

• Exhibition Address: New China International Exhibition Center (Beijing,City)

• Our Booth No.: E2775

• Contact Info.: GN Solids Control

GN Will Bring Lastest Patent Shale Shaker And All Main Solids Control Equipments To the Exhibition.

Solids Control Specialist
* Oil & Gas Drilling Mud Equipments

* HDD Mud Recycling System

* Slurry Separation And More

About 10th,CIPPE

• One of the top 4 petroleum exhibition in the world

• 12 International pavilions / cippe,with 65,000 exhibit space

• 1,200 exhibitors / The professional visitors reach 40,000

Learn more:http://www.cippe.com.cn/cippeen/

The mixing and reserve mud tank is after :Drilling mud suction Tank(2) for the 1000HP (ZJ40) Drilling rig mud system.500 bbls. three (3) compartment reserve tank, 10’ wide x 8’ deep x 37’ long mounted on a 40’ skid per above general specifications and including:

Mixing and reserve tank compartment:

150 bbls mixing compartment

175 bbls reserve #1 compartment

175 bbls reserve #2 compartment

one (1) full partition with bottom equalizer on reserve tanks.

top grating includes tubing handrials and toe boards.

one (1) stair to ground with handrials.

removable walkway with handrials to suction tank.

one (1) 1’’ diameter x 25’ long valved water washdowen hose.

16’’ x 18’’ mud ditch with 10’’ dump gate to each compartment.

three (3) psi 10 hp mud agitator supplied and mounted on tank. two (2) in reserve tank compartment and one (1) in mixing compartment.

two (2) 3’’ bottom mud guns with butterfly valves.

three (3) 10’’ butterfly valve clean-out gates – one (1) each in compartment.

one (1) 12’’ bottom equalizer to suction tank.

two (2) 6’’ hopper to suck mix mud in any tank.

two (2) 8×6 centrifugal pumps with mechanical seals, each powered by a 100 hp, 1800 rpm, 480 volt, 3-phase, 60 hz xp ac motor supplied and mounted on tank porch for mud mix.

one (1) 12’’ dich connection to suction tank.

one (1) 6’’ mud gunning line connection to suction tank.

one (1) 2’’ water line connection to suction tank.

Mud Tank

by George Trist

Drilling mud suction tank is the requirements of our client mud system second tank.The first tank :Oilfield shale shaker tank (1).

Details of the mud suction tank for the 1000HP drilling mud system.

500 bbls mud suction tank. three (3) compartment suction tank with two (2) 15’-6’’ long x 10’ wide x 8’ high suction

compartment and one (1) 8’ long x 10’ wide x 8’ high pill compartment mounted on a 40’ skid per above general spesifications and including:
top grating. includes tubing handrials and toe boards.
one (1) psi 10 hp mud agitator supplied and mounted in pill compartment.
one (1) psi 10 hp agrtator supplied mounted in each suction compartment.
three (3) 3’’ bottom mud guns with butterfly valves.
three (3) 10’’ butterfly valve clean-out gates – one (1) in each compartment.
two (2) 10’’ suction lines, one (1) for each mud pump.
mud pump to be capable of suching from any compartment.
one (1) mud lap on suction tank with 1’’ water tap.
8’’ suction line in each compartment of the suction tank for mud mix. Continue reading “Drilling mud suction Tank(2)”