Feb 10

GN mud system have been exporting to over 60 countries and areas. The mud system can be used for oil & gas drilling, HDD, water well drilling, geothermal drilling, etc.

Recently, I am busy with two projects for Africa. They are both water well drilling companies. But as the drilling rig size is different, and they have different requirement and budget for the mud system. We offer different configurations.

500gpm mud system

500gpm mud system for first client. The water well drilling depth will not deep, and the client need simple mud system, and we offer mud system with below equipment list:

  • 1) 1ea shale shaker, equipped with 3panel shaker screen, treating capacity 120m3/h for light mud or water treatment.
  • 2) 2ea mud agitator, to mixing the mud and suspending the heavy mud to avoid settlement.
  • 3) 1ea mixing hopper, to mixing bentonite or barite
  • 4) 1ea centrifugal pump, to give mixing power for the mixing hopper. Can also work to transfer the mud out when the mixing hopper stop work.
  • 5) 1ea mud tank with 9m in length, 2.2m in width and 2.2m in height. This design mud tank can be put into container for shipment, easier transportation and much better sea freight cost.

All above item is installed on the mud tank, and the mud system can working well for drilling rigs & mud pumps.

500gpm mud system for another client. The water well drilling depth is deeper to 1000m. The client rig is from Drillmec, and he need 3 stage treatment mud system. And we offer mud system with equipment list below:

  • 1) 1ea shale shaker, equipped with 3panel shaker screen, treating capacity 120m3/h for light mud or water treatment.
  • 2) 1ea mud cleaner, equipped with 3 panel shaker & 1ea 10inch desander cones & 8ea 4inch desilter cones. The mud cleaner require 2sets 45kw centrifugal pump for feeding the cones.
  • 3) Mixing hopper, mixing pump, trailer mounted tanks is equipped for the system.

We normally customize mud system for client, if you need any support, pls contact GN Solids Control.

If you enjoyed this post, make sure you subscribe to my RSS feed!

written by admin \\ tags: , , , ,


Leave a Reply