Month: August 2009

We manufacture solids control system for mobile drilling rigs.

Visite our website to lean more about our mobile drilling rig solids control equipments.

Knowledge about mobile drilling rig:

In early oil exploration, drilling rigs were semi-permanent in nature and the derricks were often built on site and left in place after the completion of the well. In more recent times drilling rigs are expensive custom-built machines that can be moved from well to well. Some light duty drilling rigs are like a mobile crane and are more usually used to drill water wells. Larger land rigs must be broken apart into sections and loads to move to a new place, a process which can often take weeks. You need solids control equipments to suit the right mobile drilling rig.

Small mobile drilling rigs are also used to drill or bore piles. Rigs can range from 100 ton continuous flight auger (CFA) rigs to small air powered rigs used to drill holes in quarries, etc. These rigs use the same technology and equipment as the oil drilling rigs, just on a smaller scale.

The drilling mechanisms outlined below differ mechanically in terms of the machinery used, but also in terms of the method by which drill cuttings are removed from the cutting face of the drill and returned to surface.

We sell offer,supply mobile drilling rig solids control equipments,and drilling mud purification system from China.We are mobile drilling rig mud control equipments manufacturer.

One of our customer require a customized mud cleaner.here is our QA about the mud cleaner and shale shaker.

Q1  Do you have dimensions of your proposed shaker setup to see if it will fit our system .

A 1,Dimensions of our proposed shaker,last email we offer you the shaker according to your screen dimensions.Pls check the following dimensions to see if it will fit your system.If not,pls provide your requirements for the dimensions.

Dimension

2050×1600×1500mm

Length: 2050mm  Width:1600mm  Height:1500mm (Total height of the shaker and desilter)

Do you use panel screens that are put in with wedges .

Q 2, We use two kind of screens A and B, pls tell us which one you prefer?

A,Show in picture 1

Picture 1 mud cleaner

B, Panel screens that are put in with wedges

Show in picture 2

Picture 2

The wedges for shale shaker

Q 3 Do you have diagrams of your proposed mud cleaner or shale shaker?

A 3,The whole mud cleaner is combine by picture3 shaker and picture4 desilter.The hydrocylone desilter is installed above the shaker.No desander.

And the type of the screen can be different as in Q2

Picture 3 double deck shale  Shakers

We supply  double deck Adjustable shale shaker,the following is Customer’s questions about the adjustment of shale shaker

1，Can you adjust the deck angle on your shale shakers ?
The shale shaker deck angle adjustment is: 0°～3°, following picture is an unfinished equipment we are making for our indian customer,we will give you the tool for adjustment.

2,Can the top screen be the same size as the bottom or is this not necessary ?
This is not necessary,actually,we design it according to your treating capacity,for yours,the top screen is smaller than the bottom screen.

I will probably have more question later .

Thank you very much for your help and I hope we can do business together .

The illustration for double deck  adjustable shale shakers?

Welcome to buy customized mud cleaner,and double deck adjustable shale shaker from us.We sell mud cleaner and shale shaker from China.

We are desilter and desander China manufacturer,we sell desilter and desander worldwidely.

Learn more: Desilter and desander.

As a solids control equipment of the third stage in drilling operation, desilter is used to remove solid particles of 20-40µm. Through constant practice and innovation, this disilter has been featured by reliable technical properties, good processing results, long service life of its hydraulic cyclone and stable performance.

Desilter and desander image:

Desilter and desander is suitable for any kind of drilling rigs.

Buy now :desilter.

The hydraulic cyclone adopts fast makeup in its inlet and outlet, which is convenient for replacement and maintenance.

China directional drilling mud system desander desilter manufacturer, Offer and sell the best desander desilter to customer.

Thanks for your info. about your needs for drilling fluids  system and submersible slurry pump

,now we are clear about your requirements.

We enclosed two directional drilling mud  system we ever manufactured for our customer and the quotation for your models.

About the Submersible slurry pump,from your system conditions,we recommend a new model of our company to you.It has higher flow but low power.

2,About the mud Cleaner,your current one doesn’t work properly  is probably because the parts of the whole system doesn’t integrated well.The sand pumps, the submersible slurry pump,the hydrocyclone and the linear motion shale shaker should intergrate according to the whole system treating capacity.

From your 4×3 sand pump,we know your treating capacity,and our design for you is a well integrated one.We have ever designed many complex for systems for drilling.Our technology are real projects proved.We insist on providing customer customized cost-effective solutions.

For any further info. Pls let us know.

Awaiting for your soon reply.We will try our best to supply you the best drilling mud system and submersible slurry pump.

We got an inquiry for a directional drilling mud system.

Jessie , We currently own a 4,000 gal mud recycler which our company built ourselves which the current shale  shaker does not seem to work properly .

We are a trenchless directional drilling company and have been in the industry for 15 years .

The recycle we own has a three tank system , a settling 2,0000 l , a desilt 4,000l and a active clean tank 11,000 approx values .

This directional drilling mud system has 2   4×3 pumps which 1 is used for running 6 x 3″ hydro cyclones and the other to drive mud guns and to charge the drill rig mud pump

The shaker is a double decker (doublelife from Oklahoma USA ) with 5ft x 4ft screens . The bottom is used as scalper shale shaker and the top handles the underflow from the hydrocylones(drying screens) . This is the directional drilling mud  system weakness and we want to improve this but still use the current tank structure .

The genset we have is a 85kva .

Can you help us and how much would it cost for the mud cleaner that you have sent photos of ?

Please find the attached pictures of our directional drilling mud system .

Oil well drilling equipments supplier-GN

Oil well drilling equipments are a wide field industry,we specilize in drilling mud circulation system equipments. Such as shale shakers,mud cleaners,   Hydrocylone    desander, mud  desilters.

Now I share the history of oil well drilling history with you:

The earliest known oil wells were drilled in China in 347 CE. They had depths of up to about 800 feet (240 m) and were drilled using bits attached to bamboo poles.[1] The oil was burned to evaporate brine and produce salt. By the 10th century, extensive bamboo pipelines connected oil wells with salt springs. The ancient records of China and Japan are said to contain many allusions to the use of natural gas for lighting and heating. Petroleum was known as burning water in Japan in the 7th century.[2]

the Middle East’s petroleum industry was established by the 8th century, when the streets of the newly constructed Baghdad were paved with tar, derived from petroleum that became accessible from natural fields in the region. Petroleum was distilled by the Persian alchemist Muhammad ibn Zakarīya Rāzi (Rhazes) in the 9th century, producing chemicals such as kerosene in the alembic (al-ambiq),[3] and which was mainly used for kerosene lamps.[4] Arab and Persian chemists also distilled crude oil in order to produce flammable products for military purposes. Through Islamic Spain, distillation became available in Western Europe by the 12th century.

Continue reading “Oil well drilling equipments supplier-GN”

We are looking drilling mud treatment,disposal equipments agent

To promote our drilling mud treatment and disposal equipments,we are looking for agents around world.This way we will also offer better local service to our international drilling mud treatment equipments customer.

Contact now:GN solids Control

Thanks for your interst in our drilling mud treatment equipments.

Our equipments and systems are widely used in oil gas drilling fluids mud disposal and treatment.

We are very interested in your proposition,and actually as you know,the drilling mud treatment equipments and systems are big deals,we do need local people to help us communicate with our international customers.And from your introduction of your company,we see you would be good at marketing our products in Syria.That would be great.

But you know,we need to understand each other better,so we recommend we do one regular deal first.,after that it would be the right time for us to get into agent,or sole agent in your country.

Our products including whole series of solids control equipments:

Drilling fluids treatment system, Shale Shaker, Mud cleaner, Hydrocyclone(Desander & Desilter),Decanting Centrifuge,Vacuum degasser,Sand pump,Gas-liquid Separator,Jet Mud Mixer,Mud Agitator, Shear Pump,Submersible slurry pump, Electric Ignition Device ,Mud Gun, Mud Tank,Mixed-hopper, series solid control equipment and the drilling fluid circulation system for oil gas drilling, the products are widely used in petroleum oil and gas exploration industry, no-dig engineering, geotechnical engineering, mine, metallurgy, coal, hydropower and many other industries.GN solids control products can be used in both onshore and offshore oilfield project.

For further info,pls let us know.And we are looking forward to our progress.

Awaiting your comments.And looking forward to getting into drilling mud treatment equipments business.

Regards

Be agent of China manufa

We sell Decanter centrifuge world widely

GN Solids Control is manufacture Decanter centrifuge for Drilling mud purification system.Our Decanter centrifuge use can use UL certified electric motor.

we are Contacting with a US American big importer for decanter centrifuge with UL certification.

Decanter Centrifuge is the key equipment of dealing with the super fine hazardous solid phase. Decanting cenrifuge can depart and recycle the solid phase larger than 5µm, recover the density of drilling fluid quickly and increase the drilling speed. Decanter centrifuge is the ideal oilfield drilling fluid purified equipment.

The decanter centrifuge is mainly used to control the density and viscosity of drilling fluid, decrease the content of the solid phase, remove the hazardous solid phase, recycle the heavy spar, regain the left of whirling current separator to guarantee the good performance of drilling fluid and increase the speed of drilling. Continue reading “Decanter centrifuge China manufacturer”

GN Solids Control is a vacuum degasser manufacturer from China.

Buy are see specifications : Vacuum Degasser

the vacuum degasser is a special device used to process gas-trapped fluid commonly found in drilling operations in the oil field. This device is the latest degasser developed by our company, suitable for all kinds of mud cleaning system. It helps to recover the mud density and stabilize the mud viscosity, thus reducing the drilling cost. At the same time, if there are no gas bubbles in the mud, this device can be used alternatively as a large capacity stirring device.

We supply other related equipments: Continue reading “China Vacuum Degasser manufacturer”