Mud Solids Control Equipment

Drilling mud decanter centrifuge is the fourth stage equipments for a drilling mud system.Drilling mud cleaning first stage uses drilling fluids shale shaker ,then second stage uses desander,third desilter,(now drilling mud cleaner is widely used to replace desander,desilter).

drilling mud decanter centrifuge

The drilling mud decanter centrifuges can separate fine particles well,for separating 5～7μm particles in drilling mud,usually use medium speed decanter centrifuge,for less then 2μm,usually use high speed decanter centrifuges.

Principle of Operation
Bowl Speed – Depending on the model specification, drilling mud decanter cenrifuges are equipped with either fixed or variable speed arrangement on the main drive enabling the operator to adjust the bowl speed between 1200 and 3850 rpm within a few seconds.  This option, combined with variable conveyor speed, gives a unique dimension to the use of decanters for drilling fluids treatment. The optimum speed for solids removal for a specific cut point depends on the composition of the drilling fluid and the nature of the drill cuttings.

Decanter cenrifuge Scrolling Speed
Decanters are equipped with either fixed or variable back drive. The scrolling speed -(relative conveyor speed) can be changed in a matter of seconds by operations of a simple control switch. The optimum scowling speed is selected in each case according to solids load, required separation efficiency and required underflow density.

Principle of Operation

Bowl Speed – Depending on the model specification, decanters are equipped with either fixed or variable speed arrangement on the main drive enabling the operator to adjust the bowl speed between 1200 and 3850 rpm within a few seconds. This option, combined with variable conveyor speed, gives a unique dimension to the use of decanters for drilling fluids treatment. The optimum speed for solids removal for a specific cut point depends on the composition of the drilling fluid and the nature of the drill cuttings.

Scrolling Speed – Drilling mud Decanter centrifuges are equipped with either fixed or variable back drive. The scrolling speed -(relative conveyor speed) can be changed in a matter of seconds by operations of a simple control switch. The optimum scowling speed is selected in each case according to solids load, required separation efficiency and required underflow density.

Feed Rate – In general a single drilling fluid decanter is capable of a process feed rate of up to 200 gpm. The treatment capacity is influenced by mud type and mud rheology. On drilling rigs it is common to utilize a minimum of two decanters installed in tandem for low weight muds and in series on high-density muds where barite recovery is necessary.

GN solids control based in China manufacture and supply complete line of high-speed, variable-speed and fully variable-speed drilling mud decanting centrifuge for handling drilling fluids. Our factory and company are Quality Management System ISO 9001-2000 certified.GN solids control operate international oil gas drilling mud separation system。 Ruggedly built for oilfield and industrial Solids control service, decanting centrifuge is especially effective in meeting fluid-on-cuttings discharge requirements in environmentally sensitive areas. decanting centrifuge also deliver high fluid recovery rates and efficient solids control to significantly reduce the operator’s total mud cost and limit waste disposal volumes.GN-China leading decanting centrifuge manufacturer.

Related posts:

1. China high speed decanter centrifuge We just recieved inquiry for decanter centrifuge,high speed variable decanting...
2. Supply drilling mud management decanter Centrifuge We manufacture drilling mud management decanter centrifuge including any speed...
3. Supply high speed decanter centrifuge We supply high speed decanter centrifuge for oilfield gas &...
4. Supply Oilfield Decanter centrifuge with speed types GN Solids Control design and manufacture Oilfield Decanter centrifuge with...
5. Horizontal Decanter Centrifuge Manufacturer-GN GN Solids Control is an oilfield Decanter centrifuge China Based...

Related posts brought to you by Yet Another Related Posts Plugin.

written by GN solids Control \\ tags: decanter centrifuge, decanting centrifuge, drilling fluids, drilling mud