Recently, GN Solids Control solid vacuum pump and vacuum degasser passed the factory’s strict inspection and were sold to Chinese drilling companies. The specific models of these equipment are vacuum pump GNSP-40B and degasser GNZS270B. The solid vacuum pump is used as a mud transfer equipment. The vacuum degasser is used as the secondary stage of mud control to remove hydrogen sulfide from the mud. The following is mainly about the advantages of GN Solids Control vacuum degasser.

GNZCQ series drilling fluid vacuum degasser is usually installed after the shaker, which can effectively separate harmful gases existing in the drilling mud, maintain the mud specific gravity, and protect the sand pump and mud pump to improve the processing effect of subsequent equipment. The GNZCQ series vacuum Degasser adopts self-priming mud suction method without additional mud feed pump. The GNZCQ series vacuum Degasser can also play the role of a large mixer to prevent the drilling mud from sedimentation.

GN Solids Control vacuum degasser also has the following characteristics:

1. The vacuum pump sucks the mud into the vacuum tank and uses it to suck the gas out of the vacuum tank. The vacuum pump plays two different roles here. 2. The water ring vacuum pump always operates in isothermal state, suitable for flammable and explosive gas suction, with reliable safety performance. 3. The mud is injected through the rotor window at high speed to break the bubbles in the mud completely, resulting in good degassing effect. 4. The main motor is offset, the machine center of gravity is reduced. 5. Belt drive is adopted to avoid the complication of the gearbox. 6. The application of air-water separator does not cause water and gas to be discharged simultaneously, keeping the exhaust pipe unobstructed. In addition, water can be recycled to the vacuum pump to save water. 7. The suction pipe is inserted into the mud tank, and when the mud is free of gas invasion, it can be used as a high-power mixer.

GN Solids Control‘s vacuum degasser also has the following characteristics:

1. The vacuum pump sucks the mud into the vacuum tank and uses it to suck the gas out of the vacuum tank. The vacuum pump plays two different roles here. 2. The vacuum pump always operates in isothermal state, suitable for flammable and explosive gas suction, with reliable safety performance. 3. The mud is injected through the rotor window at high speed to break the bubbles in the mud completely, resulting in good degassing effect. 4. The main motor is offset, the machine center of gravity is reduced. 5. Belt drive is adopted to avoid the complication of the gearbox. 6. The application of air-water separator does not cause water and gas to be discharged simultaneously, keeping the exhaust pipe unobstructed. In addition, water can be recycled to the vacuum pump to save water. 7. The suction pipe is inserted into the mud tank, and when the mud is free of gas invasion, it can be used as a high-power mixer.

In addition to the equipment described above, GN Solids Control also produces a complete set of oil drilling mud control systems, trenchless and coal bed methane drilling mud recovery systems, pile driving and shield tunneling mud purification systems, drilling waste treatment systems, industrial environmental mining and other solid-liquid separation systems.