the vacuum degasser is a special device used to process gas-trapped fluid commonly found in drilling operations in the oil field. This device is the latest degasser developed by our company, suitable for all kinds of mud cleaning system. It helps to recover the mud density and stabilize the mud viscosity, thus reducing the drilling cost. At the same time, if there are no gas bubbles in the mud, this device can be used alternatively as a large capacity stirring device.
Hydrocylone Desilter separators are one of the important equipment of controlling the solids in the drill fluid. The action is to remove the harmful solids, promote the drill fluid performance and separate 15～47 μm solids particles accounting for over 60﹪ of solids quantity.When the quick drilling is made in the soft formation, the shale shaker only can remove large solids particles, but the Hydrocylone Desilter separators canremove fine solids particles, fully promoting the solids control efficiency. Therefore, it is especially suitable for the well site where the formation is
considerable hard and the drilling speed is slower so that the cuttings is very fine in particle size.
Hydrocylone Desilter separators Features:
hydrocyclone desilter
1.The desilter is fitted with 8 cyclones that are of symmetrical arrangement and features compact structure, small volume and easy maintenance.
2.The matched shaker is fitted with an eccentric shaft vibrator and a sheet of tensioned screen tightened with hook strips on both sides, therefore, it is
easy to tighten and replace the screen.
Hydrocylone separators including:Desander,desilter.Buy hydrocyclone desilter separator From China manufacturer,you’ll enjoy best price,and good service.
We supply replacement shaker screen for derrick ,brandt, mi-swaco shale shaker screen all around the world.
As a shale shaker manufacturer,we know how to select the best shale shaker for customer.Just tell us the models and specs of any brand of shake shakers including derrick,brandt,swaco replacement shale shaker screen.We will supply you with different price for different quality screens.We aslo have OEM shale shaker manufacturer who supply us with GN shake shaker Screen.
SEPARATION by VIBRATORY SCREENING
One method of removing solids from drilling mud is to pass the mud over the surface of a vibrating screen. Particles smaller than the openings in the screen pass through the holes of the screen along with the liquid phase of the mud. Particles too large to pass through the screen are thereby separated from the mud for disposal. Basically, a screen acts as a “go-no-go” gauge: Either a particle is small enough to pass through the screen or it is not.
Screening Surface. Screening surfaces used in solids control equipment are generally made of woven wire screen cloth, in many different sizes and shapes. The following characteristics of screen cloth are important in solids applications.
Screens may be constructed with one or more LAYERS. NON-LAYERED screens have a single screen cloth mounted in a screen panel. These screens will have openings that are regular in size and shape. LAYERED screens have two or more screen cloths, usually of different mesh, mounted in a screen panel. These screens will have openings that vary greatly in size & shape. Continue reading “Shale Shakers China shaker screen Supplier”
When design Solids control system for oilfield drilling rig,we Consider the following factors for customer.
oilfield drilling rig
1. Obtain solids removal equipment for your operation
2. Remove as many drilled cuttings as possible before being pumped back down the bore hole
3. Do not by pass the shale shaker or other solid control equipment while drilling
4. Use the smallest mesh screen possible on the shale shaker. This will change from formation to formation
5. Maintain an adequate inventory of recommended spare parts.
6. Train & assign rig personnel to be responsible for equipment operation & maintenance
Now GN solids Control market keeps growing internationally ,welcome to join us and be our equipment agent or representative in your own country.High quality,and best price Effective Drilling rig Solids Control System
At present,Mechanical separation theory is widely used in separating drilling cuttings .GN solids Control Factory manufacture all series of equipments for Mechanical drilling cuttings separation
hydrocylone desander
Mechanical separation equipment employs mass differences, size differences or a combination of both to selectively reject undesirable solids and retain desirable drilling cuttings The desanders and desilters utilize centrifuge
China shear pump manufacturer for driling fluids processing system
The shear pump is a special purpose equipment of quickly preparing and treating the drill fluid. It can
largely quicken the dispersion of clay particles, enlarge the surface area of clay particles and meet
customers’ requirements of preparing and treating the high property mud, making the mud obtain the
Linear Motion Shale Shaker is mainly used for the first phase drilling liquid purification. The shale shaker uses two motors vibrate in-phase for separation. The electric vibrator and the electric equipment in the electric control system are importedexplosion proof appliances. The screen area is big, the capacity high and the screening efficiency high. The linear motion shale shaker track quickens the discard and improves screen efficiency. The basket can be adjusted to different angles tocope with different environments and drilling liquid conditions. The screen is durable and easy to install and maintain. linear motion shale shaker photo:
Linear motion shale shakerChina manufacturer GN Solids Control offer the world with drilling mud shale shaker equipments.We are an exporter of drilling fluid shale shaker for Indian, Russian,middle east.etc.Oilfield Company of the United States and
GN Solids Control Closed Loop System is also called fluids processing system,it consist of a mud Tank, Shale Shakers, Mud Cleaners, Agitators, Centrifuges and Pumps. All this equipment is mounted on tank and can be setup in a matter of hours once onsite. Rig up time and expenses are drastically reduced by our quick pin installation. Equipped with Shale shakers, Desilter and Desander cones are mounted over the shakers to produce The Ultimate Mud Cleaner. Adding the decanting Centrifuges on the tank allows us to remove solids from all recovered mud and also on the active mud system.
Solids control closed loop syste
Advantages of GN Solids Control Closed Loop Systems
OUR People! We provide fully trained Operators with many years of experience in Closed Loop Operations.
Reduce the cost on each well by the Thousands!
Solids are dried to the maximum efficiency
Solids are removed with the highest efficiency
Reduce haul off and dilution to the mud systems
Environmentally friendly solids control closed loop system
Reduce the number of low gravity’s to produce a lower mud cost and reduce pump repairs
Significantly reduces the amount of time and cost to get setup
Best Price Solids Control Closed Loop Systems
Moreover,as a China solids control closed loop system manufacturer,we are located in China iron production City-Tangshan.The price of raw material here is very low and with high quality.There are also many experienced workforce in iron machine production.They work very efficiently. Moreover,we control production cost well by outsourcing some processing work.Your best Solids Control Closed Loop Systems manufacturer and supplier.
Instead of a collection of equipment from various sources, the GN Drilling mud processing is a field-proven network of solids-control components specifically designed to function as a single unit.
