Month: April 2014

GN drilling mud gas separator is popular in Indonesia.Many drilling contractor and supplier company in Surabaya Indonesia. Many drilling controactor specialize in project for PT Pertamina EP Indonesia ( Indonesian State oil and gas mining Company).At the moment drilling contractors are tendering for Mud gas separator, thus they would like to inquire regarding Mud gas separator that GN Solids Control manufacture with such specifications.

Qty for the mud gas separator:2 Units

Technical specification for the mud gas separator:

Separator Model Main Body

Diameter 1000mm

Wall thickness 10mm

Capacity 240-320 M3/H

Inlet pipe 4″

Output pipe 10″

Gas Discharger pipe 8″

Mud gas Separator Weight 2000 Kg

Mud gas separator Dimension 2000x2000x5860

Mud gas separators in other countries also called Poor boy degasser,Liquid-gas separators, Mud/Gas Separators, etc.GN Solids Control  designs and manufactures ZYQ Mud gas Separators. Mud gas Separators is an extremely reliable, vital piece of safety equipment for today’s drilling operations. It is ideal for use where drilling is likely to encounter large volumes of gas, sour gas or when an operator is drilling with an under balanced mud column.

GN Solids Control also manufacture the solar charged electric flare ignition device to matching the mud gas separator to burn the gas.

As part of the requirement of the tender drilling contractor are required to provide PT PERTAMINA EP with a supporting letter from GN Solids Control.

GN mud gas separator is to separate gas inside the drilling mud vent to the flare line to burn it in the safe areas.

 

GN oilfield decanter centrifuges can be used in different applications for handling drilling mud for solids control and drilling waste management.

How to set up bowl speed for decanter centrifuge for drilling mud?

Take GNLW363 serires decanter cantrifuge for examsple, operator can set up the decanter centrifuge speed as following, it can used for following application:

• Barite Recovery: Operator can run the centrifuge with G foce at range from 700-1000 G, and run the 14 inch decanter centrifuge at speed around 2000 RPM.
• High Gravity Solids(HGS) Separation:Operator can run the centrifuge with G foce at range from 1000-2000 G, and run the 14 inch decanter centrifuge at speed around 2500 RPM.
• Low Gravity Solids(LGS) Separation:Operator can run the decanter centrifuge with G foce at range from 1800-2300 G, and run the 14 inch decanter centrifuge at speed around 3000 RPM.

How to asjust the speed for decanter centrifuge?

The method to set up bowl speed for decanter centrifuge normally have three ways, one is to USE the VFD control system to adjust the frequency for the motors to control the speed for the decanter centrifuge, second is to use Hydraulic driven system to adjust the bowl speed and differential speed.Third, to change the centrifuge speed is to use different sizes of pulley and belt to change the speed.

GN offers decanter centrifuge for all above types to allow users to use the decanter centrifuges for different applications.

Decanter Centrifuge Feeding Pump speed and capacity.

To feed the GN 14 inch GNLW363 Decanter centrifuge, normaly we recommend to use GNG30-7.5 screw pump.The GNG30-7.5 screw pump is a positive displacement single screw pump, the capacity of the pump depends on the speed or the motor, the motor transfer the speed thru gearbox to the pump.  For example, the ration of the Screw pump is 6/1 so if the pump motor run at 60HZ, that means the motor run at 1750RPM and the pump will run at 291RPM. And if the decanter centrifuge feeding pump run at 291 RPM with capacity at 30m³/h. And if adjust the VFD to run at 30HZ, the pump speed will be half capacity, around 15m³/h.

 

 

 

 

GN TBM Slurry separation equipment are optimally adapted to the requirements of the tunnelling (TBM) process and separate the drilling suspension completely from the solid particles consisting of gravel, stone and sand in various grain sizes. A powerful combination different solids control equipment of state-of-the-art shale shaker technology and Hydro cyclones with high g-forces results in deposit able excavated material.

GN Solids control manufacture all major solids control equipment for the TBM Slurry separation system including following:

 

• TBM Slurry separation Shale Shakers for coarse solids separation.

• TBM Slurry separation desander and desilters for desanding and desilting separation.

• Big bowl big volume decanting centrifuge for fine solids separation.

• Centrifugal slurry pump for feeding to the separation equipment.

• Mixing hoppers for bentonite mud mixing.

• Mud tanks for storage drilling mud Continue reading “Solids Control Equipment for TBM Slurry Separation System”

Solids Control Unit for Civil and Underground Industry

• Drilling mud Solids Control systems – This industry involves horizontal directional drilling rigs and Micro tunneling rigs which require it to be equipped with drilling solids control systems. So we can sell the mud solids control system package to the drilling rig manufacturer, and underground drilling contractors as well as the mud service companies who do service for the drilling contractor.

  

For this industry, we have two major advantages, first, we can do customized design with competitive pricing as required by customer. We also service the untapped civil and underground industry  with solids control equipment whereas our competitors in America may focus only on the oil gas industry, or only have prefabricated models for the customer, who will only  customized design at very high extra costs.

Mining industry Solids Control unit

• Solids Control system –  During the exploration of the mines by drilling, the drilling contractor will need to use a mud recycling system to clean the drilling fluids and reuse the drilling fluids. Especially for diamond drilling customer, they need compact mud systems to clean drilling fluid and to separate very fine solids.

• Small compact solids control equipment – Many companies have ignored this industry, so they did not design small compact equipment like mini shakers, mini solids control decanter centrifuge to fit this industry.

Even if our competitors have the mini solids control equipment, as they are very big companies who are not willing to make the complete customized package for the customer, like we do. GN Solids Control have already done many project for this industry in Australia, Asia and Canada which has a huge demand for such mining exploration solids control equipment for diamond drilling.

 

GN Solids is the leading manufacturer for decanter centrifuge. They have different type centrifuge for different applications.  Recently, GN Solids just finish the CIPPE oil show in Beijing with their latest patent decanter centrifuge. On the show, many visitors come and show keen interest on GN PLC display screen, positive pressurized control panel.  Two big visitors check GN factory after the exhibition and release Purchase Orders on decanter centrifuge and vertical cuttings dryer.

Continue reading “GN Solids Decanter Centrifuge Different Applications”