Why we should have drill slurry storaged? Mainly it is because of the reasons below:
(1) Requirement for the carriage and storage of mud on mobile drilling units has increased over the years, it is not convenient to process the drilling mud at the platform, you have to collect the used drill slurry and carry it to drilling fluids plant for process, then recycle the clean drill slurry and disposal the useless cuttings, so that it will not influence the environment.
(2) Clean drill slurry should be storaged for use, for drilling , for mixing , for lubricate the drill bit.
(3) Useless drill cuttings should be collected and storage, then carried to drilling waste management system for process.
GN solids control manufacture drill slurry storage tank for various application, with necessary mud agitators, mud gun, centrifugal pump and mixing hopper. We can produce mud storage tank together with solids control system or separately. Compared with shaker tank and intermediate tank, the pipeline of storage tank is much simple, if required by the clients, we will divide it into several compartment by clapboard. Sometimes mud ditch is installed on each compartment. Handrails, stairs, cleaning gate, valves are included, but walkways are not included. There is flexible hose connected 2 tanks.
Drill mud storage tank could be rectangle or cylindrical, and the tank size can be customized. The material is usually carbon steel Q235 or Q345, and the thickness of the steel plate usually are 8mm or 10mm.
If you need drill mud storage tank, welcome to contact GN solids control.