|
Aug
09
|
GN solids control supply hydrocylone desilter.
See the specifications here:Hydrocyclone desilter.
Hydrocylone Desilter separators are one of the important equipment of controlling the solids in the drill fluid. The action is to remove the harmful solids, promote the drill fluid performance and separate 15～47 μm solids particles accounting for over 60﹪ of solids quantity.When the quick drilling is made in the soft formation, the shale shaker only can remove large solids particles, but the Hydrocylone Desilter separators canremove fine solids particles, fully promoting the solids control efficiency. Therefore, it is especially suitable for the well site where the formation is
considerable hard and the drilling speed is slower so that the cuttings is very fine in particle size.
Hydrocylone Desilter separators Features:
hydrocyclone desilter
1.The desilter is fitted with 8 cyclones that are of symmetrical arrangement and features compact structure, small volume and easy maintenance.
2.The matched shaker is fitted with an eccentric shaft vibrator and a sheet of tensioned screen tightened with hook strips on both sides, therefore, it is
easy to tighten and replace the screen.
Hydrocylone separators including:Desander,desilter.Buy hydrocyclone desilter separator From China manufacturer,you’ll enjoy best price,and good service.
Related posts:
- Mechanical drilling cuttings Separation equipments At present,Mechanical separation theory is widely used in separating drilling...
Related posts brought to you by Yet Another Related Posts Plugin.
4 Pings to “Hydrocylone Desilter separator”
2 Responses to “Hydrocylone Desilter separator”
-
1. steve Says:
September 1st, 2009 at 11:11 pmYou can get more information about separator at http://www.process-facility.com
-
2. yingzi Says:
May 3rd, 2010 at 5:12 pmdesander and desilter
December 4th, 2009 at 6:10 pm
[...] Combo Cleaner combines hydrocyclones and a Vibratory Screen to provide liquid/solids separation at a high flow rate. As a first stage, [...]
February 1st, 2010 at 8:03 pm
[...] desander and desilter selection depends on particle size: A,If you use 10″ desander before desilter,max particle size:47microns B,If you do not use desander,but use shale shaker before desilter,you [...]
April 8th, 2010 at 8:30 pm
[...] mud cleaner. Its treating capacity is less than 60m3/h(equal to 264GPM), it adopts 4pcs 4″ desilter cone and 1pc 8″ desander cone, it depends on the exact treating capacity you required. The [...]
May 13th, 2010 at 7:05 pm
[...] Hydroclone Desilter Maintenance [...]