GN Solids Control has been working for oil & gas drilling field for about 10 years. In past years, we accumulate rich experience in mud system manufacturing, sales, operation, and maintenance. Recently, we have inquiry from Africa about 1000bbl mud system for oil drilling rig, and we give below proposal:

1) shale shaker tank

The first tank, shaker tank is equipped with 2 sets shale shaker, 1 set mud cleaner, agitators, centrifugal pumps etc.

Mud tank: 1 set, tank size 11000 X 2100 X 2150mm. The mud tank is oilfield skid mounted tank, the most popular tank type for oil drilling.

Shale shaker: we recommend GNZS594 shale shaker for better working performance, longer shaker deck and composite material screen with long lifetime.  GN composite material screen is replacement for Swaco Mongoose

Mud cleaner: we recommend mud cleaner with 2ea desander cyclones and 12ea desilter cyclones. The deck shaker is same as GNZS594 shaker, thus same type shaker screen is required, no need backup different type screens.

Centrifugal pump is equipped to feeding the mud cleaner cyclones.

The third compartment in mud tank is clean mud after treatment; mud agitator is equipped to suspending the mud.

2) Decanter centrifuge tank

The second tank, centrifuge tank is equipped with 1ea middle speed centrifuge, jet mud hopper and mixing pump.

The centrifuge GNLW452 middle speed centrifuge is used to remove the barite in the mud or other big solids particles.

The mud hopper and mixing pump is used to mixing chemicals into the drilling mud, to adjust the mud weight and mud viscosity.

Mud tank: 1 set, tank size 11000 X 2100 X 2150mm. The mud tank is oilfield skid mounted tank, the most popular tank type for oil drilling.

3) Mud storage tanks

There are another two mud tanks for mud storage, same tank size to shaker tank. The tank is equipped with necessary mud agitators, mud guns and necessary pipelines and other spares.

If you need any solids control equipment or mud system, pls contact GN freely.