The mud cleaning system produced by GN solids control is widely used for horizontal directional drilling , water welling drilling ,coal bed methane, geothermal hole and mining diamond core drilling , it is used to separate the drill cuttings from the mud, so that the clean mud can be re-circulated to continue the drilling process.
As the Geothermal drilling usually close or inside the downtown, this requires the mud system to be compact with less footprint and user friendly with less noisy. Also Geothermal well drilling sometimes require high capacity performance for deep wells. Below is the jobsite photo of mud cleaning system for geothermal drilling, which is produced and commissioning by GN solids control.

Geothermal mud cleaning system
Like water well drilling, mud rotary drilling is also the desired method for installing geothermal loops. As the bit penetrates the soil, it creates smaller fragmented pieces that are called drill cuttings. The mud carries these cuttings to surface to create an open hole from the top down to the bottom. The drill cuttings are collected into a mud pan or settling pit on surface and then the mud is re-circulated to continue the drilling process.
Continue reading »
written by GN solids Control
\\ tags: diamond core drilling, geothermal, HDD, horizontal directional drilling, mud cleaning system, mud pit, mud recycling system, rotary drilling, water well drilling
GN solids control mud system can be used for both oil & gas drilling and water well drilling. Water wellis an excavation or structure created in the ground by drilling to access groundwater in underground aquifers. Most shallow well drilling machines are mounted on large trucks, trailers, or tracked vehicle carriages. Water wells typically range from 3 to 18 m deep, but in some areas can go deeper than 900 m.

GN200gpm trailer mounted mud system for water well drilling
Most of the water well drilling rig is trailer mounted or truck mounted, for convenient transportation from one place to another. Some contractors do not process the used mud from water well drilling, but recently there are more strict laws for environment protection, they have to search for small mud recycling system to complete the job. They prefer trailer mounted mud system, GN 200gpm trailer mounted mud recycling system is widely used for water well drilling. Total transportation dimension is 5500x2300x4000mm( including the trailer height), it meets the transportation limit in most of the countries in the world( you do not need to remove anything when transport in domestic). You only need to remove the mud cleaner and shale shaker from the tank, then I can fit for 40feet standard container.
GN200gpm trailer mounted mud system including:
GNZS752 shale shaker 1set
GNZJ752 mud cleaner 1 set
Continue reading »
written by GN solids Control
\\ tags: centrifugal pump, drilling rig, mixing hopper, mud cleaner, mud gun, mud recycling system, mud system, shale shaker, trailer mounted mud tank, water well drilling, water well rig