Sep 01

Vibrating screen normally called shale shaker in oil and gas drilling industry. GN solids control produce vibrating screen machine and replacement screens for it.

Working principle of vibrating screen:

GN vibrating screen

GN vibrating screen

By the motor force and adjusting the amplitude of the eccentric shaft, vibrating screen moves quickly like a circle. Materials in the sieve case can be saperated and screened from the sieve pore in this process.

Vibrating screen in Venezuela

We are seeking for a distributor in Venezuela to have some of our shaker screens in stock, the local market’s requirement is very large. If you are interested in GN distributor in Venezuela, and have large enough warehouse and good client’s network, pls contact GN solids control.

GN vibrating screen model:

By treating capacity:

80m3/h, 120m3/h, 150m3/h, 200m3/h

By vibration motion:

Linear motion and balanced elliptical motion

By screen panel qty

2-screen-panel, 3-panels, 4-panels

By location of buffer box( inlet method):

Top-buffer-box, back-buffer box

Continue reading »

written by GN solids Control \\ tags: , , ,

Aug 05

GN solids control choose Italy Oli brand vibrating motor for all our shale shakers. Vibration motor is important components for shale shaker, I will introduce briefly about vibrating motor installation & maintenance.

1 How to install vibrating motor ?

shale shaker vibrator

shale shaker vibrator

 (1). Before installing vibrator, turn off and lock out/tag out all energy sources to mounting structure according to ANSI standards。

(2). If using a cutting torch or welding, test atmosphere for gas level or dust content.

(3). Make sure mounting surface is strong and flat, 0.25 mm acros vibrator feet. (This will minimize internal stress to vibrator casting when tightening mount bolts.

(4) Make sure mounting surface and vibrator are clean and free of debris, paint, and oxidation.

(5) Before installing vibrator onto mount, apply thread sealing compound to all bolts.

(6) After the vibrator has been operated for 10 to 20 minutes, check bolt torque. Tighten if necessary

2 How to  maintain  vibrating motor?

(1)Clean dust on shell regularly

(2)Before operating, must check the bolts to confirm whether there is loose or not. Otherwise, we must screw bolts tight before running shaker

(3) Inspect the cable, whether there is wear, hold down, crushing, etc.

(4) the vibration motor should be under good lubrication during operation:

Motors before fixed on shaker, the bearing is filled with SKF specific lubricate grease, the temperature range is -40 ~ 200℃

During running, every 2000 working hours user should makeup LGHP2 lubricate grease once. Every bearing can not be filled over 25.8g.

Continue reading »

written by GN solids Control \\ tags: , , , , ,