Mud Solids Control Equipment

GN oilfield flare ignitor system is also called Electric Ignition Device.The flare ignitor used for igniting gases from mud gas separator.

An Flare ignition system for flares is described particularly suitable for use in remote areas with limited facilities and which includes as components a power source and specifically storage batteries with a solar battery for recharging and having an associated gasoline engine driven blower for supplying air for ignition, together with an ignition panel

oilfield flare Ignitors system

adapted for ready connection to a source of fuel gas, to the blower, to the power source, to the stack pilot, to the pilot ignitor and if desired to the flare header for purge gas supply. The panel preferably includes a manually oprable push button for an ignition spark plug, has indicators of pilot operation and has manual control of the delivery of fuel gas for ignition, for use as pilot gas and for use as purge gas. A thermocouple is provided at the pilot for control of indicating lamps indicative of pilot operation or non-operation as well as purge failure.

Flare Ignitor is also called oilfield torch unit.

Flare Ignitors ffshore exploration and well testing. Our models are available in 12 volt solar or 110 volt electric, each comes with a standard manual flame detection, and if requested can be fitted with a thermocouple for detection and monitoring. Continue reading »

written by GN solids Control \\ tags: flare ignitor, gas drilling, oil drilling, oilfield equipment

GN Solids Control design and manufacture Oilfield Decanter centrifuge with different speed types.

In oilfield drilling mud separation,The larger the centrifugal force, the finer the separated solids, so three types of speed decanter centrifuge can get according to separating factor.

oilfield decanter centrifuge

a)     Low-speed oilfield decanter centrifuge: it is also called “barite recovery” centrifuge. Its separating factor is 500~700. To low-density solids, its separating point is 6~10μm. To high-density solids, its separating point is 4~7μm. This kind of centrifuge can be used for recovering barite.

b)    Medium-speed oilfield decanter centrifuge: its separating factor is 800 or so, solids of 5~7μm can be separated, so harmful solids can be separated from the mud, so that gravity and viscosity of the mud can be controlled. Most drill team will choose this kind of centrifuge at present.

c)High-speed oilfield decanter centrifuge: its separating factor is 1200~2100 or so, separating point is 2~5μm, it can remove harmful solids, control mud viscosity, it is usually connected with low speed centrifuge to make up a dual centrifuge system(See figure 3). In the system, low-speed centrifuge is installed at the first grade, barite separated
from it is discharged into mud tank to be recovered, liquid is drained into a surge drum first, and then be sent by a pump to high-speed centrifuge; the solid separated from high-speed centrifuge will be discharged out of the tank and the liquid is back to recirculation system. “Dual centrifuge system” can remove

GN Solids Control supply Oilfield Decanter centrifuge from China,Top quality,China price.

written by GN solids Control \\ tags: China supplier, decanter centrifuge, oilfield equipment

Oil Field Drilling Equipments are composed of different kinds of oilfield equipment including drilling equipment, workover equipment and production equipment.The world’s famous standard for oilfield drilling equipments are API standard (The American Petroleum Institute (API).

• Drilling Rigs.

drilling rig

A drilling rig is a machine which creates holes (usually called boreholes) and/or shafts in the ground. Drilling rigs can be massive structures housing equipment used to drill water wells, oil wells, or natural gas extraction wells or they can be small enough to be moved manually by one person.hey sample sub-surface mineral deposits, test rock, soil and groundwater physical properties, and also can be used to install sub-surface fabrications, such as underground utilities, instrumentation, tunnels or wells. Drilling rigs can be mobile equipment mounted on trucks, tracks or trailers, or more permanent land or marine-based structures (such as oil platforms, commonly called ‘offshore oil rigs’ even if they don’t contain a drilling rig). The term “rig” therefore generally refers to the complex of equipment that is used to penetrate the surface of the earth’s crust.

• Solids Control Equipment

GN Solids Control is one of China leading manufacturer of solids control equipment

solids control equipments

includes centrifuges, shale shakers, desanders, degassers, desilters, mud cleaners, agitators, mud gas separator, shearing pumps, and sand pumps etc.

• Workover Rigs.

workover drilling rig

Workover rigs  includes offshore and onshore workover rigs, which range from 150 HP to 1,000 HP. The service depth of our workover rigs usually equipped with Caterpillar diesel engines and Allison transmissions is from 8,000 ft to 30,000 ft.

• Drilling Equipment.

Drilling equipments including masts, substructures, drawworks, crown blocks, traveling blocks, hooks, hook blocks, swivels, rotary tables, and top drives. The rated load of our AC/VFD drive top drives is from 190 tons to 1,000 tons.

• Triplex Mud Pumps.

triplex mud pump

Triplex Mud Pumps is a reciprocating piston/plunger device designed to circulate drilling fluid under high pressure (up to 7500 PSI) down the drill string and back up the annulus.Triplex Mud Pumps come in a variety of sizes and configurations but for the typical petroleum drilling rig, the triplex (three piston/plunger) mud pump is the pump of choice. Duplex mud pumps (two piston/plungers) have generally been replaced by the triplex pump, but are still common in developing countries. A later development is the Hex pump with six pistons/plungers.

• Well Control Equipment.

bop control systems

Well Control Equipment includes Shaffer and Cameron type blowout preventers, which include annular and ram type BOPs. Also included in our well control equipment are BOP closing units, choke manifolds, and kill manifolds.

• Oil Country Tubular Goods.

Oil Country Tubular goods includes drill pipes, heavy weight drill pipes, drill collars, casing and tubing. Our drill pipes are usually should be in accordance with API Spec 5D and their sizes are from 2-3/8″ to 6-5/8″. The steel grades of the drill pipes include E75, X95, G105, and S135.

written by GN solids Control \\ tags: drilling equipment, drilling rig, oilfield equipment