Mud treatment is required in many different industries. For GN Solids, the most popular mud treatment is oil drilling mud treatment, or HDD mud treatment. In recent years, we have more and more project from other industry mud treatment, like piling mud, TBM mud treatment, or construction mud treatment. One batch of mud separation equipment for US client, ready for delivery. The client will use the equipment to treat the construction mud.
The mud will be collected by one big hopper with wide opening, and then transfer to high G drying shaker, to separate the big solids particles.
GN high G drying shaker is equipped with 4 panel composite material shaker screen or coarse steel screen per client’s request. The longer shaker deck can give better separation, and make the solids discharge as dry as possible. The super G force also very important to the dryness of discharge solids.
The high G drying shaker is seated on the catch tank with submersible slurry pump. The slurry pump can suck the mud and feeding to next unit for further treatment.
written by admin
\\ tags: centrifuge, high g dryer, mud cleaner, Solids control
Even the oil drilling market is very down, we still can receive some purchase orders from old clients. Recently, we finish production for waste management system, and is exporting to Uganda, Africa now. China Oilfield Services Limited (COSL) bought the equipment and doing drilling operations there. The project including below items:
1) High G dryer with collection tank beneath.
The High G dryer is GN 4 panel shale shaker with up to 8G vibration motor, and 4pcs composite material shaker screen. The high G force and longer deck can make the solids discharge much dryer, which is easier for transportation. The clean mud will drop down to the beneath catch tank.
2) High speed decanter centrifuge with mud catch tank
The decanter centrifuge is GN 14inch high speed centrifuge, which is the most popular model for oil & gas drilling. The 14inch centrifuge is equivalent to Swaco 518 centrifuge or Derrick DE1000 centrifuge. Many client used Swaco/Derrick centrifuge before, and shift to GN after knowing GN strength and high quality of GN centrifuge.
The high speed centrifuge can be set to 3200RPM, which can separate 2-5microns fine solids. The clean drilling mud drop down to the catch tank below. Then, the screw pump will transfer the clean mud back to drilling active tanks for reuse.
Above equipment system is more proper for water based mud treatment. For oil based mud cuttings treatment, Vertical cuttings dryer will give much better performance. GN vertical cuttings dryer have been put into market for over 3 years. The separation point is mainly depends on the screen basket, 0.25mm/0.35mm/0.5mm opening for options.
As China & USA leading brand for solids control / drilling waste management, GN Solids Control have various product to meet the different needs, including vertical cuttings dryer, high G dryer, decanter centrifuge, solidification unit, thermal desorption unit etc.
written by admin
\\ tags: centrifuge, high g dryer, Solids control, waste management
GN Solids Control just finish CIPPE Beijing oil show with great success. The latest model solids control equipment at the oil show attracts lots of visitors. Drilling waste management vertical cuttings dryer and drilling waste management centrifuge designed on high telescopic skid for easier operation, decanter centrifuge family from 9 inch baby centrifuge, 14inch popular size centrifuge, 18 inch big bowl big capacity centrifuge to 22inch big bowl centrifuge for fast drilling. GN Solids Control also take one economic desanding plant mud system to the show, some core drilling client, diamond drilling client or mining may need this economic design to treat the drilling mud in working process.
After CIPPE Beijing 2016 oil show, GN now is ready for OTC 2016 oil show in Houston, USA. GN Solids Control has two booths there to enlarge the brand impact in America and Latin America countries.
GN Solids America @OTC2016, OTC official website: http://2016.otcnet.org/
- OTC Event time: 2-5 May, 2016
- OT Address: Houston, Texas, USA
- GN Solids Control China Booth No. : Reliant Center 1652-A
- GN Solids America Booth No.: Reliant Arena 9732
- Make an appointment by sending email to: sales@gnsolidscontrol.com
Continue reading »
written by admin
\\ tags: centriufge, high g dryer, Solids control, vertical dryer, waste management
OBM waste management is necessary for drilling rigsite environmental protection. It may revolved in vertical cuttings dryer, decanter centrifuge, thermal desorption unit etc. We have provided over 20 sets OBM waste management system to overseas market and domestic market. The working performance of GN OBM waste management system win high praise from clients and they give repeat order to GN Solids Control.
In some countries, there is policy for no pit drilling. Even Water based mud, the drilling company cannot dispose it directly into mud pit. Our company design WBM waste management total solution for no pit drilling company. The equipment may but not limited to below items:
Continue reading »
written by admin
\\ tags: centrifuge, high g dryer, solidification unit, Solids control, vertical cuttings dryer
GN Solids Control just receive order from waste management service company (call this client WMSC for short in below chapter). WMSC is waste management service company with many years jobsite experience, their main client is CNPC and SINOPEC. With China new policy on environmental protection, WMSC is faced with booming business project with CNPC & SINOPEC, requiring more waste management equipment to support their project. As China leading manufacturer for solids control equipment & waste management equipment, GN Solids Control definitely become their main supplier.
WMSC already use our decanter centrifuge & vertical cuttings dryer & high G dryer for over 2 years for waste management project. They give high praise on GN equipment. Pls see more details of below.
Continue reading »
written by admin
\\ tags: centrifuge, high g dryer, Solids control, vertical dryer, waste management
Oily sludge treatment is very important: environmental protection, oil recovery, water separation. We just finish one project for COSL, the China largest offshore drilling company. You can check details from here: COSL oily waste treated by GN centrifuge with chemical enhancement. Recently, we receive one project requirements from Africa and they need us to offer proposal for oily sludge treatment. Their goal is to separate the oil and water, to incinerate the solids. And we offer 2 solutions below:
Option A: solution for oily sludge treatment – High G dryer + oil water separator + TDU
Step 1: Use high G dryer to treat the oily sludge and separate into two groups: solids and liquid.
Step 2: use oil water separator to separate liquids into oil and water
Step 3: use Thermal desorption unit to incinerate the solids.
Comments: this solution with better performance, but it is very costly because of TDU.
Continue reading »
written by admin
\\ tags: high g dryer, oily sludge treatment, solidification unit, Solids control, thermal desportion unit
GN Solids Control is big producer for solids control equipment & drilling waste management equipment. As oil price going down, the solids control market become cold because of rig stop drilling, fund problem etc. Under this background, GN Solids Control put forward series of policy to support the market and to support the sales amount.
Policy 1: GN Solids Control will expand drilling waste management market and stock some equipment to give quicker response. Now, we are producing 40 sets of decanter centrifuge, 20sets of vertical cuttings dryer, 40 sets of high G drying shaker to stock the main equipment. All of them are key equipment to treat the water based mud drilling cuttings before the oil waste can go to Thermal desorption units.
 
Continue reading »
written by admin
\\ tags: centrifuge, cutting dryer, high g dryer, Solids control, waste management
|
GN Solids Control Brochure
