Nov 07

ZJ drilling series drilling mud recycling system manufactured by GN Solids Control can march all ZJ series drilling rig.GN Solids Control is 1 of top10 China drilling mud equipments manufacturer.

ZJ drilling rig are the models of Chinese made drilling rig,GN Solids Control Mud circulation system for ZJ Drilling rig as below:

  • ZJ Deep well drilling rig mud system:
    ZJ drilling rig mud system

    ZJ drilling rig mud system


  • ZJ70 drilling mud solids control equipments:

·  ZJ70/4500LD Drilling Rigs
·  ZJ70/4500L Drilling Rigs
·  ZJ70/4500DS Desert Drilling Rigs
·  ZJ70/4500D Drilling Rigs

  • ZJ50 drilling mud recycling system:

·  ZJ50/3150L Drilling Rigs
·  ZJ50/3150D E-Drive Drilling Rigs

  • ZJ40 drilling mud solids control equipments:

·  ZJ40/2250T9 Drilling Rigs
·  ZJ40/2250LT Drilling Rigs
·  ZJ40/2250L1 Drilling Rigs
·  ZJ40/2250L Series Drilling Rigs
·  ZJ40/2250DB Drilling Rigs

  • ZJ30 drilling mud circulation system:

·  ZJ30/1700JD Drilling Rigs
·  ZJ30/1700DZ Drilling Rigs
·  ZJ30/1700B Series Drilling Rigs
·  ZJ30/1700 Drilling Rigs

  • ZJ20 drilling mud solids control system:

·  ZJ20/1350ZDB Drilling Rigs
·  ZJ20/1350Z Truck-Mounted Drilling Rigs

  • Other drilling mud circulation system for drilling rig.

·  ZJ15X Slant Hole Drilling Rigs
·  ZJ15/900DB-1 Drilling Rigs
·  ZJ10/585 drilling rigs
·  1500m Drilling Rigs

To the specifications and design of ZJ series drilling mud circulation system,and the marched drilling mud equipments,please contact GN Solids Control sales team.Cost-effective mud equipments and system from GN Solids Control.

written by GN solids Control \\ tags: , , , ,

Nov 04

An old customer asked us to supply the PNEUMATIC SPINNING WRENCHES for his oilfield service.Though the client know the contact info of the PNEUMATIC SPINNING WRENCHES manufacturer,but he gives us their contact info and ask us to buy and sell to them.



This is really what we call trust!!


The wrench is the best replacement of rotary rope (or chain). It is applied for the mechanized spinning operation. The applicable range of pipe diameter is wide, and it can be freely adjusted whenever necessary. There are two configurations for clamping mechanism: air tyre and air cylinder. There are two driving and controlling styles: pneumatic and hydraulic. The spinning wrench is designed and manufactured according to API Spec 7K “Specification for Drilling Equipment

As a solids control equipments to manufacturer,we keep giving our clients reliable service.And now we even win the trust of our customer for PNEUMATIC SPINNING WRENCHES.

written by GN solids Control \\ tags: ,

Oct 22

GN Solids Control is an oilfield Decanter centrifuge China Based Manufacturer,our decanter centrifuge rangles from low speed to high speed,and we also supply virable decanter centrifuge for drilling mud.

LW355-1250N series of high speed centrifuge produced by our company can better meet the above requirements.
Model and technical parameters.

Horizontal decanter centrifuge

Horizontal decanter centrifuge

2.1 Centrifuge Model:GLW  355-1250N
High quality stainless steel made
Effective roller length 1250mm
Inner diameter of the roller 355mm

High speed horizontal decanter centrifuge
2.2 Technical parameters
Rated liquid processing capacity:40m3/h
Rated slag tipping capacity:5t/h
Mix separation point:2μm
Rotating speed:3200rpm
Highest separation factor:2035
Main frame power:37kw
Auxiliary frame power:7.5kw
Pump engine power: 5.5kw (standard deploying 5.5kw long-pole pump, can deploy 11kw screw pump according to the need)
Features of this GLW  355-1250N High speed horizontal decanter centrifuge
a)    Oil gas exploration developer wish to use more clean mud drilling to protect the oil gas layer so as to achieve higher oil gas production.
b)    The using of turbo screw drilling technology put forward higher requirements on the mud cleanness.
c)     More attention will be paid to the disused mud treatment, while treat the disused mud is mainly to separate solid phase from liquid phase as much as possible.

Medium speed centrifuge can separate solid phase granule with the diameter of 5~7μm in low-viscosity mud, as to the thinner granule and high-viscosity mud or the granule in oil based mud, it can not separate them well. So, medium speed centrifuge can hardly meet the new requirements of solid-control system, deploying high speed centrifuge is the development trend in future.
LW355-1250N series of Horizontal high speed centrifuge produced by our company can better meet the above requirements.

written by GN solids Control \\ tags: , , ,

Sep 15

GN Solids Control is one of about ten china manufacturers who can design and manufacture all the equipments for a complete solids control system.More and more customer want to represent us to be our agent in their contries or areas,to help them market Oilfield Equipments well and get more trust from their client,our management had a meeting and changed the policy.We provide the Authorization Letter (Agent Contract) for our agents.

Now the policy as below:

All the interested agents are requested to send their details by filling the Agent Application form below. If the agency business is not a registered business(as company) then we will need a letter of reference and bank details.

GN Solids Control


GN solids control catalogProducts Brochure

GN solids control catalogApplication Form

How to become our agent?

  • We review and feedback you with Agent Contract
  • You agree with the Agent Contract and send us the stamped one.
  • We stamped and feedback.
  • Start agent cooperation

The oilfield equipments from GN solids Control is mainly drilling mud purification equipments,including an entire series of equipments like: Shale Shakers,mud Cleaners,hydrocyclone separators,decanter centrifuge,vacuum degasser,mud gas separators,oilfield equipment spare parts etc.

These equipments are widely used in oilfield well drilling,horizontal directional drilling.

written by GN solids Control \\ tags: ,