Feb 10

GN new designed BEM mini mud cleaner, it is special for small handling capacity mud system, such as HDD(horizontal directional drilling), water well drilling, desanding unit and small workover rig mud tank system.

GN BEM mini mud cleaner GNPJ752 Features:

mini mud cleaner

mini mud cleaner

1 with 2 panel shaker screens at API 60~80 mesh size, total screen area 1.35m2

2 vibration motion: BEM( balanced elliptical motion), which is the lastest technology, BEM shaker’s treating effect is better than traditional linear motion shaker.

3 With 4” desilter cone to separate 20 microns solids, cone qty is optional, 4pcs, 6pcs, 8pcs, 12pcs, depends on the handling capacity you required.

Or with 10” desander cone to separate 75 microns solids, cone qty is optional, 1pc or 2pcs, depends on treating capacity.

4 2ea Italy Oli vibration motor 0.7HP

5 Pretentioned shaker screens are locked by wedge, which is very convenient to replace shaker screen

Continue reading »

written by GN solids Control \\ tags: , , , , , , ,

Jun 21

Drilling fluid cleaner also means mud cleaner, or drilling mud cleaner, and the cones, hydro-cyclone cones is the main part of the drilling fluid cleaner.

Drilling fluid cleaner (mud cleaner) is a combination of desander,  desilter and shale shaker,  and the differences of desander and desilter is the dimension of mud cleaner cones, usually the cone diameter is more than 6″is called Desander, and used as the second-control equipment in drilling operation. We commonly used 8 “and 10” cones desander to separate solid-phase particle size 47-76μm in the drilling fluids. And usually the cone diameter is less than 6″is called Desilter, and used as the third-control equipment in drilling operation. We commonly used 5 “and 4” cone to separate solid-phase particle size 15-47μm in the drilling fluid. Based on customer requirements and capacity, we can select groups of cone into Desilter.

drill fluid cones
Continue reading »

written by admin \\ tags: , , ,

May 27

The desander and desilter are important parts of solids control system, and the hydrocyclone cones is the key component. Here is the detailed introduction of the cones design, the use and ability of desander desilter cones, and then I introduce you the manufacturers of  desander cone and desilter cones.

Desander desilter cones design

The desander cone and desilter cones all are also referred as hydrocyclone cones, cones are basically separate the solids from drilling fluids. The separation process is carried out by employing centrifugal forces. The Cones are made of high durameter polyurethane with optional steel inserts, which ensure consistent productivity.

cones in desanderdesander operation design

cones in desander

Continue reading »

written by GN solids Control \\ tags: , , ,