With local strong partner, GN Solids open the Russia market, and get a rapid growth in sales amount. The most popular solids control equipment for Russia including: shale shaker, mud cleaner, centrifuge, shaker screen, pumps.
1) 10 sets shale shaker to Russia
Just this month, GN Solids finish the production of 10sets shale shaker. The shale shaker model is 4 panel linear motion shaker, equivalent to Swaco Mongoose shaker. GN Solids shaker also have some other features as following:
- Shaker bottom made from stainless steel with longer lifetime, and anti-corrosive, much better than carbon steel
- Pretensioned flat screen with wedge installation, changing screen will be easier and faster.
- Composite material shaker screen, longer life and good separation performance
- With Italy OLI brand vibration motor or US martin brand vibration motor, for reliable vibrator performance.
The 10sets shale shaker will be used for 3sets oil drilling rigs, with 1500gpm mud treating capacity. One set shaker will be in stock as backup. When any emergency occurs, the stock shaker can replace the problem shaker.
Continue reading »
written by admin
\\ tags: centrifuge, shaker, Solids control, waste management
Mud treatment is required in many different industries. For GN Solids, the most popular mud treatment is oil drilling mud treatment, or HDD mud treatment. In recent years, we have more and more project from other industry mud treatment, like piling mud, TBM mud treatment, or construction mud treatment. One batch of mud separation equipment for US client, ready for delivery. The client will use the equipment to treat the construction mud.
The mud will be collected by one big hopper with wide opening, and then transfer to high G drying shaker, to separate the big solids particles.
GN high G drying shaker is equipped with 4 panel composite material shaker screen or coarse steel screen per client’s request. The longer shaker deck can give better separation, and make the solids discharge as dry as possible. The super G force also very important to the dryness of discharge solids.
The high G drying shaker is seated on the catch tank with submersible slurry pump. The slurry pump can suck the mud and feeding to next unit for further treatment.
written by admin
\\ tags: centrifuge, high g dryer, mud cleaner, Solids control
Trenchless technology Specialized Committee of China Geological Society (CSTT)， The twenty-first China International Trenchless Technology Conference and Exhibition (ITTC2017) (21 Annual Conference) will be held from April 2017 to 16 in Jiangsu, Suzhou International Expo center. ITTC conference is the top international event in the field of trenchless industry, which has been held in North China, East China, Southern China and other places 20 sessions. The twenty-first CSTT annual meeting will be held in Suzhou, JiangSU province. This will provide technical exchange and business platform for trenchless equipment manufacturer, engineering contractors, and owner of projects.
- Conference time: April 14th to April 16th, 2017
- Address: International Expo center of Suzhou, Jiangsu Province
- GN booth No.: B20
- GN equipment shown: desanding plant, mixing unit etc.
Continue reading »
written by admin
\\ tags: centrifuge, desanding plant, mud cleaner, mud system, shaker
GN has many different model decanter centrifuge for different application. For now, GN have below bowl size centrifuge for option, including:
- 9 inch baby centrifuge with only 220mm bowl diameter; It can only be used for diamond drilling, mining, area with request small capacity treatment. The treating capacity can be only 3-5m3/h.
- 14inch bowl centrifuge with 360mm bowl diameter; it can be used for oil drilling mud system, to cut down the mud weight or recover barite. The treating capacity can reach up to 15-25m3/h.
- 18inch bowl centrifuge with 450mm bowl diameter; it can be used for fast drilling, the treating capacity can reach up to 30-40m3/h.
- 22inch bowl centrifuge with 550mm bowl diameter, similar function to 18inch bowl centrifuge.
- 30inch bowl centrifuge with 760mm bowl diameter. This is used for TBM big project, need large treating capacity for mud. The treating capacity can reach up to about 100m3/h.
The client can choose different model centrifuge as per the project request, engineer recommendation, budget etc. Pls contact us and let us know your project requirement, then we can offer your proper model.
Continue reading »
written by admin
\\ tags: centrifuge
Desander and desilter are the second phase separation and third phase separation in oil drilling solids control system. There are different type desander and desilter for option, we may firstly to know the difference and advantages of each type, then we can know how to make choice for project.
First type: Desander/Desilter without downstream drying shale shaker
1) Small footprint, economic choice, no consumable screens
2) For oil gas drilling un-weighted drilling mud
3) Only for wet cuttings, not recommended for weighted mud and drying solids
Second type: Desander/Desilter with Mini 2panel Shale Shaker
1) Small footprint, economic choice, acceptable drying solids
Third type: Desander/Desilter with 3panel Shale Shaker
1) Big capacity, drying solids
Continue reading »
written by admin
\\ tags: 200gpm mud system, centrifuge, desilter, mud system, Solids control
High speed gravity separation technology help GN Solids to produce high quality decanter centrifuge, to serve domestic and overseas clients, by offering solids control and drilling waste management solutions, to develop GN into China high end technology company.
GN has various model centrifuges for option with different bowl size and different capacity, with different speed to separate different size particles.
1) GN 9inch baby centrifuge with only 9inch bowl size, and treating capacity will be 3-5m3/h. Normally, mining project / diamond drilling will require the small centrifuge to give better performance of mud treatment. What’s more, the cost of small centrifuge is very cheap.
2) GN 14inch bowl centrifuge with 14inch bowl size, and ration of length to diameter is over 3, to guarantee on the separation performance. The treating capacity for drilling mud can reach to 15m3/h to 25m3/h per the mud weight, viscosity etc. This model decanter centrifuge is equivalent to Swaco 518 centrifuge, Swaco 414 centrifuge, Derrick DE1000 centrifuge etc.
Many drilling contractor stop centrifuge renting service of Swaco branch or centrifuge renting service of Derrick company, they come to GN to buy their own centrifuges, and GN can offer training on centrifuge operation and maintenance. In long term, the drilling contractor can save lots of cost on mud treatment.
3) GN 18inch bowl centrifuge with 18inch bowl size and there are two options:
GNLW452 with 1800RPM bowl speed, which is specialized for barite recovery; the price is much better.
GNLW453-VFD with 0-2500RPM bowl speed, which is specialized for fast mud weight cutting, the centrifuge is controlled by VFD control panel & AC for cooling. The price is relatively higher.
4) GN 22inch bowl centrifuge and GN 30inch bowl centrifuge.
The big bowl big volume centrifuge is generally used for construction, TBM machine, Subway construction etc. In the mentioned project, large volume of mud will be engaged, and big capacity centrifuge is necessary to guarantee on the project period.
written by admin
\\ tags: centrifuge, Solids control, waste management
OTC oil show is coming in May, 2017. GN Solids will attend the show as usual. With base in Houston, GN Solids can prepare the show equipment in GN Solids America warehouse, and transport to the show hall very convenient.
1) GN Solids America
GN Solids America is branch company of GN Solids Control in Houston, US. GN Solids America already working for over 4years; and the clients from North America, South America and Latin America can come to GN facility to check the real product and talk with our sales engineers there face to face, to know more about GN Solids America.
Except for GN Solids America, we have also GN Solids Russia in Moscow, and many partners in different countries to serve the oil drilling market.
2) What GN equipment will be shown for OTC ?
The latest model shale shaker, the shaker is replacement shaker to Swaco Mongoose, with 4 panel composite material shaker screen; popular used for oil drilling mud system.
Hydraulic decanter centrifuge, the decanter centrifuge is 14inch bowl centrifuge, equivalent to Swaco 518 hydraulic centrifuge or Derrick DE1000 hydraulic centrifuge. Similar bowl size, similar treating capacity, and similar driven type
Vertical cuttings dryer, the cuttings dryer is the 5th generation dryer which have been improved based on former model, much more reliable performance and composition parts with better lifetime.
Shaker screen: the popular shaker screen model will be taken to the show, eg. Replacement screen for Derrick shakers, replacement screen for Mongoose shakers, etc.
3) The booth Number of GN Solids America
- No.1 Booth.: NRG Center 1369-6
- No.2 Booth: Arena 8834
Before OTC, CIPPE is also around the corner, just in March, Beijing, China. CIPPE is very close to GN factory, and we will freight large bowl centrifuge and other items for show. Hopefully, we can have many clients coming to talk with GN Sales People. Get GN booth number in CIPPE, pls check from GN website.
written by admin
\\ tags: centrifuge, CIPPE, OTC, shaker, shaker screen
As the drilling operation going on, more and more solids will come into the mud, lead to the arising of mud weight. The change of mud weight is not good for drilling operation. Decanter centrifuge is required to remove the solids, and control the mud weight.
GN Solids Control is China leading brand for oil drilling mud decanter centrifuge. We have different model centrifuge for option, including:
9 inch bowl baby centrifuge, this is popular for mining/ waste water treatment.
14inch bowl high speed centrifuge, this model centrifuge is equivalent to SWACO 518 centrifuge / Derrick DE1000 centrifuge. Fixed speed centrifuge and variable speed is available per the client’s request
18inch bowl big volume centrifuge, this model centrifuge has two options: GNLW452 and GNLW453. The two option centrifuge is used differently. GNLW452 is very popular for HDD drilling, or for barite recovery; GNLW453 variable speed can be used for fast drilling
22inch bowl big capacity centrifuge, this is only GNLW553-VFD centrifuge for tunneling or other field fast drilling.
30inch bowl centrifuge is designed for industry application.
For oil drilling application mud weight control, we recommend fixed speed GNLW363CG 14inch bowl centrifuge for better option.
- Firstly, fixed speed centrifuge is much easier for operation than variable speed centrifuge.
- Secondly, we can offer 2700RPM bowl speed centrifuge, 3200RPM pulley with belt as backup.
- Lastly, the fixed speed centrifuge is much better price than variable speed centrifuge.
Centrifuge feed pump, we recommend screw pump, positive displacement pump. The pump motor is controlled by the centrifuge control panel.
Telescopic skid is for option. The client can compare the price from GN, and local fabrication price.
Except for centrifuge, vertical cuttings dryer is another popular item for oil drilling waste management. The client needs it to recover the valuable oil based mud and return it back for drilling operation. We have two options: GNCD930 series cuttings dryer and GNCD730 series cuttings dryer. The client can choose the proper model per request.
written by admin
\\ tags: centrifuge, cutting dryer, Solids control, waste management
Centrifuge tank works as second phase separation in mud cleaning system. This part is necessary for oil & gas drilling, for deep and complex geological structure drilling operations. Centrifuge tank generally have below options for drilling company:
Option 1: rent centrifuge from solids control service / centrifuge rental company
Compared with other solids control equipment, centrifuge price is higher, as well as the higher cost on maintenance and manpower cost. As the centrifuge is not working during all drilling operations, some drilling company only rent the centrifuge when they need it. For short terms, the rental service is helpful to drilling contractors, saving cost, time and saving works.
But from long terms, rental centrifuge will lead to higher cost, not as cost-effective as having it’s own equipment.
Option 2: buying centrifuge and train the workers to do the job
If the drilling company have many drilling rigs, and the drilling operations will last for many years. Having their own centrifuge will be much better.
GN Solids Control is China leading centrifuge manufacturer, can sell centrifuge to client or rent centrifuge to client in some area with GN office.
GN can offer middle speed centrifuge, high speed centrifuge, fixed speed centrifuge or variable speed centrifuge, motor drive centrifuge, hydraulic centrifuge etc.
If the client have enough budget, we recommend 2ea VFD centrifuge for each rigsite. The VFD centrifuge can work flexible at any bowl speed, conveyor speed or differential speed, to achieve the best performance.
If the client budget in tight, we recommend 1ea VFD centrifuge & 1ea fixed speed centrifuge. The VFD centrifuge can work as flexible role and the fixed speed centrifuge can lower down the total cost.
Even the fixed speed centrifuge can change speed, by replacing pulley with belt, just taking more time and more manpower than VFD centrifuge.
If you need more information about decanter centrifuge, pls contact us freely.
written by admin
\\ tags: centrifuge, mud tank, Solids control
GN Solids Control has been working for oil & gas drilling field for about 10 years. In past years, we accumulate rich experience in mud system manufacturing, sales, operation, and maintenance. Recently, we have inquiry from Africa about 1000bbl mud system for oil drilling rig, and we give below proposal:
1) shale shaker tank
The first tank, shaker tank is equipped with 2 sets shale shaker, 1 set mud cleaner, agitators, centrifugal pumps etc.
Mud tank: 1 set, tank size 11000 X 2100 X 2150mm. The mud tank is oilfield skid mounted tank, the most popular tank type for oil drilling.
Shale shaker: we recommend GNZS594 shale shaker for better working performance, longer shaker deck and composite material screen with long lifetime. GN composite material screen is replacement for Swaco Mongoose
Mud cleaner: we recommend mud cleaner with 2ea desander cyclones and 12ea desilter cyclones. The deck shaker is same as GNZS594 shaker, thus same type shaker screen is required, no need backup different type screens.
Centrifugal pump is equipped to feeding the mud cleaner cyclones.
The third compartment in mud tank is clean mud after treatment; mud agitator is equipped to suspending the mud.
2) Decanter centrifuge tank
The second tank, centrifuge tank is equipped with 1ea middle speed centrifuge, jet mud hopper and mixing pump.
The centrifuge GNLW452 middle speed centrifuge is used to remove the barite in the mud or other big solids particles.
The mud hopper and mixing pump is used to mixing chemicals into the drilling mud, to adjust the mud weight and mud viscosity.
Mud tank: 1 set, tank size 11000 X 2100 X 2150mm. The mud tank is oilfield skid mounted tank, the most popular tank type for oil drilling.
3) Mud storage tanks
There are another two mud tanks for mud storage, same tank size to shaker tank. The tank is equipped with necessary mud agitators, mud guns and necessary pipelines and other spares.
If you need any solids control equipment or mud system, pls contact GN freely.
written by admin
\\ tags: agitator, centrifuge, mud system, shaker
|
GN Solids Control Brochure
