Mud agitator can be classified to horizontal and vertical mud agitator. All GN mud agitators feature a brand motor coupled to a rugged oilfield gearbox, which eliminates misalignment and troublesome couplings. This configuration promotes longer motor and gearbox bearing life. This highly efficient gearbox offers a 95% power transfer, which is approximately 30% more than a worm drive gearbox.
Motors of Mud Agitator
The motors GN Solids Control used is brand motors in China, and as you requried, we choose different types of motors for the agitator. Continue reading “Mud Agitator”
Sand management is very important on oil and gas drilling, it effects the the drilling work, oil and gas production.
On the drilling work, the sand management is always referred as solids control system. Because the sand manage equipment is mainly a desander, and is a part of solids control, and if we want to have a excellent result, we must combine shale shaker, decanter centrifuge and so on.
Desanding the oil product is also important to make the oil clean. And thus desander is a very important part of it, and there are a lot sand control companies to do this.
GN design complete line mud cleaning equipment for Oil&Gas drilling mud solids control,HDD mud recycling system,and indusrial slurry cleaning.
Four phase mud cleaning equipment
Shale Shaker
Shale Shaker is the first and most important equipment for drilling mud cleaning.This clenaing equipment separate
Mud Cleaning Equipment
particle size usually above 70mirons.
We provide both linear motion shale shaker and balanced elliptical motion shale shaker.
Desaner/Desilter/Mud Cleaner
Desander with 10inch cones,or 8inch cones,or 12 inch cones act as the second phase drilling mud cleaning equipment.We have customized number cones desander for clients.Desander cleaning mud usually between 47-76microns.Desilter with 4inch cones,or 5inch cones,act as the third phase mud cleaning equipment.Which clean out particles 15-45microns.Mud cleaner is a combination of desander & desilter and with underfluids bottom shale shaker,which act as both desander and desilter function.Mud cleaner manimum footprint of the equipments,and has big capacity for mud cleaning and treatment. Continue reading “GN Mud Cleaning Equipment”
The centrifuge degasser works using the principal of centrifugal force to separate gas from drilling mud. The device passes a gas-cut material throough a centrifugal force field to accomplish the degassing. The degasser contemplates the slurry flowing through the degasser by entering it through the top and flowing downward or entering from the bottom and flowing upward. In either case the slurry moves through the force field to accelerate gravity settling of the continuous phase of the flowable material and to accelerate buoyant force gas bubble rising time.
ZCQ Degassers provide effective degassing with high throughput by means of a unique centrifugal Vacuum design.
ZCQ Degassers are capable of handling high viscosity 20 pound mud with a 50% gas cut. They can draw up to 800 gpm and discharge as much as 400 gpm.
The ZCQ Degassing system is totally selfcontained on one skid. No auxiliary pump is required. Both suction and discharge are powered by a built-in Electric motor. Continue reading “Centrifugal Degasser”
Drilling mud & fluid conditioning systems is an important part of drilling work. And it always containing well control lines, solids control systems, fluids treatment equipments and fluids transfer equipment etc.. I list all of them below:
GN make vibrating screens for mining industry,and also design complete machinery for mining slurry separation,such as desanders, desilters,decanter centrifuges.We have exported vibrating screens and complete mineral industry slurry separation system to Turkey and many other countries around the world.
The vibrating screen is a kind of sieving equipment of international advanced level, developed by our company on the basis of carrying on the advantages of traditional screens and absorbing the outstanding technology from abroad
Vibrating Screen
It is widely used for grading and screening materials in the following fields: minerals, quarry, building materials, water conservancy and hydropower, transportation, chemical industry, smelting and so on.
Vibrating Screen Features:
1.Vibrating Screen uses eccentric block to produce strong exciting force.
2.Crossbeam and the main body of the screen are connected with high strength screw bolts. So they have the features of simple structure and easy maintenance.
3.GN Vibrating Screen adopts tire clutch with capability of flexible connection and stable operation.
4.GN Vibrating Screen adopts the structure of small amplitude, high frequency, large obliquity to make the screen hold the capability of high efficiency, large handling capacity, long life span, low consumption, little noise. Continue reading “Vibrating Screen for mining”
Mud recycling system is important in hdd boring, how mud travels in hdd no dig system, is always a problem people may ask. And then, we concern what GN Solids Control can supply, and who all over the world have chosen GN.
The mud is born clean, it was mixed by bentonite and some chemical mixtures, then stored by a tank. Ready to go to the hdd no dig system. Then it was pumped to the pipe and to boring the hole, later it was bring back by the pipe to a storage tank with all the cuttings rocks and sands.
The mud recycling is needed now, the drilling mud with sands and drilling cuttings are pumped to the system, then the cleaned mud return to the pipe.
The mud recycling is usually including shale shaker, mud cleaner, or desander and desilter instead, sometimes decanter centrifuge is also needed. The drilling mud flow through the shale shaker, desander cones, desilter cones, then the decanting centrifuge.
All units within the range use two processes when cleaning mud to ensure the drilling fluid can be recycled and used to the efficiency of the first time it is pumped down the hole.
The first process is with the use of a shaker screen. When the mud is drawn from the hole it is first discharged onto a fine mesh, which constantly moves from side to side spreading the mixture across it. This allow the drilling fluid to fall through whilst larger items such as rocks and cutting remain on the mesh until they are shaken off its bottom edge and removed from the system. Continue reading “mud recycling system for hdd boring”
Drilling fluids is the most important thing in drilling works. It means a lot, so here I list some manufacturers and also some directories for you guys. GN Solids Control is a professional manufacturer of drilling fluids solids control system. So if you need solids control system, contact GN Solids Control
WDC operates air/mud rotary combination, large diameter flooded reverse circulation, hollow stem auger, sonic, direct push and well development/pump rigs that have served over 300 environmental engineering and remedial clean-up contractors in support of federal programs for the DoD, DoE, EPA, USGS, and the BLM. They have also provided support to consulting firms on hundreds of major landfill, industrial, mining, cathodic protection and UST/MTBE projects for municipalities and major industrial clients, adapting new methods of drilling and sampling to address the evolving needs of their clients.
Our customers help us determine the core competencies we need to deliver cutting-edge services and to anticipate new challenges facing the industry. By modeling our skills along the lines that are most congruent with the services our customers require, more…
GEO Drilling Fluids started in 1971 as a small independent mud company. Then in the early 1980’s, GEO Drilling Fluids became part of a larger organization, and in 1996 the company returned again to being an independent company. GEO Drilling Fluids, Inc. has grown and is an established and reliable corporation with over 150 years of experience in our management team alone. Continue reading “Top drilling fluids supplier in the world”
Sand pump is kind of centrifugal pump, and it is a very important component of solids control system, being used to pumping the drilling fluids to the tanks. So when we want to buy sand pump, or other pumps, we may want to know that who are the famous pump manufacturer, and how to find more manufacturers.
http://www.kishorpumps.com/
KISHOR PUMPS is a reputed Indian centrifugal pumps manufacturing company having strong presence in all sectors of industry like Chemical, Petrochemical, Refineries, Power, Pharmaceuticals, Infrastructure, Public Health and many more.
They have a rich heritage of over four decades of operations.The company was started by a technocrat, late Mr. N.N.Desai and have introduced several new designs for critical pumping applications. Under the leadership of current Chairman and Managing Director, Mr. Kishor Desai, they have established a strong presence in the Indian and global market.
The product range broadly includes chemical process pumps and submersible wastewater pumps. They are proud to have introduced and established vertical submerged pumps and submersible sewage pumps in India which now have become an integral part of most industrial & wastewater pumping as well as treatment plants.
Providing our customers with an exceptional product and service.
Protecting the environment.
Improving the health & safety performance of Blagdon Pump and IDEX Pump Technologies (Ireland) Limited
Blagdon Pump and IDEX Pump Technologies (Ireland) Limited has a commitment to comply with requirements of I.S EN ISO 9001:2008, and to comply with the letter and the spirit of current OH&S legislation regulations and other requirements. Continue reading “Top 10 Pump Companies in the World”
Drilling fluid cleaner also means mud cleaner, or drilling mud cleaner, and the cones, hydro-cyclone cones is the main part of the drilling fluid cleaner.
Drilling fluid cleaner (mud cleaner) is a combination of desander, desilter and shale shaker, and the differences of desander and desilter is the dimension of mud cleaner cones, usually the cone diameter is more than 6″is called Desander, and used as the second-control equipment in drilling operation. We commonly used 8 “and 10” cones desander to separate solid-phase particle size 47-76μm in the drilling fluids. And usually the cone diameter is less than 6″is called Desilter, and used as the third-control equipment in drilling operation. We commonly used 5 “and 4” cone to separate solid-phase particle size 15-47μm in the drilling fluid. Based on customer requirements and capacity, we can select groups of cone into Desilter.
rugged oilfield gearbox, which eliminates misalignment and troublesome couplings. This configuration promotes longer motor and gearbox bearing life. This highly efficient gearbox offers a 95% power transfer, which is approximately 30% more than a worm drive gearbox.
