Mud Solids Control Equipment

GN TBM Slurry separation equipment are optimally adapted to the requirements of the tunnelling (TBM) process and separate the drilling suspension completely from the solid particles consisting of gravel, stone and sand in various grain sizes. A powerful combination different solids control equipment of state-of-the-art shale shaker technology and Hydro cyclones with high g-forces results in deposit able excavated material.

GN Solids control manufacture all major solids control equipment for the TBM Slurry separation system including following:

 

• TBM Slurry separation Shale Shakers for coarse solids separation.

• TBM Slurry separation desander and desilters for desanding and desilting separation.

• Big bowl big volume decanting centrifuge for fine solids separation.

• Centrifugal slurry pump for feeding to the separation equipment.

• Mixing hoppers for bentonite mud mixing.

• Mud tanks for storage drilling mud Continue reading “Solids Control Equipment for TBM Slurry Separation System”

Solids Control Unit for Civil and Underground Industry

• Drilling mud Solids Control systems – This industry involves horizontal directional drilling rigs and Micro tunneling rigs which require it to be equipped with drilling solids control systems. So we can sell the mud solids control system package to the drilling rig manufacturer, and underground drilling contractors as well as the mud service companies who do service for the drilling contractor.

  

For this industry, we have two major advantages, first, we can do customized design with competitive pricing as required by customer. We also service the untapped civil and underground industry  with solids control equipment whereas our competitors in America may focus only on the oil gas industry, or only have prefabricated models for the customer, who will only  customized design at very high extra costs.

Mining industry Solids Control unit

• Solids Control system –  During the exploration of the mines by drilling, the drilling contractor will need to use a mud recycling system to clean the drilling fluids and reuse the drilling fluids. Especially for diamond drilling customer, they need compact mud systems to clean drilling fluid and to separate very fine solids.

• Small compact solids control equipment – Many companies have ignored this industry, so they did not design small compact equipment like mini shakers, mini solids control decanter centrifuge to fit this industry.

Even if our competitors have the mini solids control equipment, as they are very big companies who are not willing to make the complete customized package for the customer, like we do. GN Solids Control have already done many project for this industry in Australia, Asia and Canada which has a huge demand for such mining exploration solids control equipment for diamond drilling.

 

GN Solids is the leading manufacturer for decanter centrifuge. They have different type centrifuge for different applications.  Recently, GN Solids just finish the CIPPE oil show in Beijing with their latest patent decanter centrifuge. On the show, many visitors come and show keen interest on GN PLC display screen, positive pressurized control panel.  Two big visitors check GN factory after the exhibition and release Purchase Orders on decanter centrifuge and vertical cuttings dryer.

Continue reading “GN Solids Decanter Centrifuge Different Applications”

To separate easily settleable solids (eg. sand or slag ) from effluent or process water, Solids separator with screw auger is required. In order to meet requirement for this field, GN Solids develop a new kinds products solids separator with screw auger.

Continue reading “Solids Separator Screw Unit for live sewerage Cleaning”

Austrialia is a good market for no-dig drilling project and has a large demand on no-dig drilling equipment. From year of 2010, GN Solids exported complete many sets of mud cleaning system there. So far, GN Solids is well known locally and awarded good reputation.

As China leading manufacturer of solids control system, GN Solids focus on customer’s requirement and always offer the best equipment. Recently, we just dispatched one set of hudraulic lifting and descending 1000GPM mud cleaning system to Australia. The system equipment configurations as below:

• two sets of mud tanks,
• 2 pcs of shale shaker
• 1 pc of Mud Cleaner with desliter cones
• mud agitators, mud hoppers, mud guns etc.

GN compact mud cleaning system is widely used in horizontal directional drilling, coalbed methane drilling, diamond drilling, water well drilling, pile drilling etc. With mud cleaning system, the constrction can lead to less pollution on environment and make full use of drilling material.

Continue reading “Hydraulic Lifting and Descending 1000GPM Mud Cleaning System to Australia”

GN Solids is a professional oifield drilling mud vacuum degasser manufacturer and supplier in China oil drilling mud solids control industry. As the pioneer in this industry, GN Solids is capable of providing customers with series products ,such as oil & gas drilling fluid solids control equipment, drilling decanter centrifuge, drilling waste management equipment and drilling security equipment.

Application of drilling mud vacuum degasser

To recomve invading gas from drilling mud, it is necessary to install a vacuum degasser. So that the invading gases may not impact mud properties. This invading gases can lead to risks and affect the lifespan of solids control equipment.

Vacuum degasser is a special-purpose oil drilling mud solids control equipment and a new type one for the drilling fluids system. Drilling mud vacuum degasser can get rid of various gases invading drilling quickly. Drilling mud vacuum degasser is very important for keeping mud gravity, stabilizing mud viscosity and reducing drilling cost. At the same time, drilling mud vacuum degasser can be used as a heavy-power mud agitator and supported applicable to all types of drilling mud purification system. The drilling mud vacuum degasser design of the structure is scientific and rational. So we are able to achieve an effective gas-liquid separation, filter out impurities and to ensure that the exhaust pipe is always smooth.

Continue reading “Drilling Mud Vacuum Degasser exported to Africa”

The shale shaker is the first stage of solids control equipment in drilling mud purification system. It can remove cuttings above 75 μm brought from the drilling well to leave the liquid with smaller particles into the tanks below, which will flow into next grade solids control equipment for further treatment.

The economy of GN Solids Linear Motion Drilling Mud Shale Shaker

GN Solids drilling fluid linear motion shale shaker is especially effective while drilling top-hole sections where heavy and high-volume solids are usually encountered. In these intervals, drilling shale shakers may generate powerful G-forces and its effective vibrating motion can quickly remove the dense solids from screens and particles from wells.

Continue reading “Linear Motion Drilling Mud Shale Shaker exported to Indonesia”

GN Solids is professional manufacturer for complete sets of drilling mud separation and recycling equipment. The conventional equipment like shale shaker, mud cleaner, desander, desilter, vacuum degasser, decanter centrifuge, mud agitator, mud gun, centrifugal pump, screw pump, etc. Here, let’s learn more about desander and desilter.

1. The general installation type and function of desander and desilter

Desander and desilter are solids control equipment with a set of hydrocyclones that separate sand and silt from the drilling mud used on drilling rigs.

They can be installed separately: Desander is installed on top of the mud tank following shale shaker and vacuum degasser, but before the desilter. Desilter is installed on top of the mud tank following Desander. They also can be installed completely: in this case, they are installed on one deck shaker and called mud cleaner or mud conditioner.

Desander removes the abrasive solids from drilling mud which cannot be removed by shale shakers. Normally the solids diameter for desander to be separated would be 45~74μm, and 15~44μm for desilter

Continue reading “Desander and Desilter for Drilling Mud System”

GN Solids is professional solids control equipment manufacturer. We can offer shale shaker, mud cleaner, de-sander, de-silter, decanter centrifuge, centrifugal pump, mud agitator, mud tanks etc. Regarding shale shaker, shaker screen is the most important spare parts. The shaker screen should be chosen by mud engineer who is in charge of test the property of drilling mud.

Continue reading “Shale Shaker Screen Applications”

On oil drilling rig site, Hi-G dryer shaker and double deck shaker is widely used for drilling cuttings treatment and recycling. They are both linear motion shale shaker. Some customer do not know the difference of Double deck shale shaker and High-G dryer shaker. As world top solids control and waste management equipment manufacturer, GN Solids can tell you the difference of the 2 types of shale shaker and choose the suitable model for your drilling rig.

Hi-G Dryer Shaker ( recommended model GNZS594, linear motion)

Compared with traditional shale shaker, this model with a Higher G force, can get better vibration screen separation. This model with 4 panel Mongoose shaker screen, can get bigger treating capacity. And the shaker screen is interchangeable with Swaco Mongoose screen, you can get the shaker screen from local Swaco distributor easily.

As it is single deck, relative easy to change shaker screen compared with double deck shale shaker.

Continue reading “Hi-G Dryer Shaker vs Double Deck Shaker”