GN Solids Control equipment mainly used on oil drilling, gas drilling, Coal bed methane drilling, Horizontal directional drilling and also geothermal drilling. Recently,we got inquiry from Kenya Geothermal Operation Company. They have one 750hp geothermal rig and want to match mud system for near future project. After have discussion with the operation manager, we offer one compact solution.
GN Solids Control equipment mainly used on oil drilling, gas drilling, Coal bed methane drilling, Horizontal directional drilling and also geothermal drilling. Recently,we got inquiry from Kenya Geothermal Operation Company. They have one 750hp geothermal rig and want to match mud system for near future project. After have discussion with the operation manager, we offer one compact solution.
Originally, we offer 3 options below:
GN Decanter Centrifuge have been upgraded from beginning year of 2014. The new generation centrifuge with two motor in one end, more compact and offer more space on the operation platform. The New Generation centrifuge is much similar with US brand centrifuge. For the time being, we also have Two Units Brand New Centrifuge on Promotion with 15% Discount. The two units 14inch bowl centrifuge, GNLW363G, made according to High standard or international standard, equal to US brand centrifuge production materi
GN Decanter Centrifuge have been upgraded from beginning year of 2014. The new generation centrifuge with two motor in one end, more compact and offer more space on the operation platform. The New Generation centrifuge is much similar with US brand centrifuge. For the time being, we also have Two Units Brand New Centrifuge on Promotion with 15% Discount. The two units 14inch bowl centrifuge, GNLW363G, made according to High standard or international standard, equal to US brand centrifuge production material.
GN Centrifuge GNLW363G is high speed centrifuge can be used both for solids control & waste management. With it’s 3200RPM high rotation bowl speed & 2700/2200rpm middle rotation bowl speed, the centrifuge can separate fine solids & can be used to recover barite also. This model centrifuge is much popular in Middle East, North Africa, Argentina, Brazil, North America etc.
Read more on GNLW363G parameters from GN website, same parameters as GNLW363BG: http://www.gnsolidscontrol.com/decanting-centrifuge/
Continue reading “Two Units Brand New Centrifuge on Promotion with 15% Discount”
GN Solids Control have offered many HDD mud cleaning system to overseas market & domestic market. The most popular HDD mud system is 500gpm Mud System. GN Solids Control committed himself to optimize the working performance of HDD mud system & solids control equipment. Target on No.1 Solids Control manufacture from China.
GN Solids Control have offered many HDD mud cleaning system to overseas market & domestic market. The most popular HDD mud system is 500gpm Mud System. GN Solids Control committed himself to optimize the working performance of HDD mud system & solids control equipment. Target on No.1 Solids Control manufacture from China.
One(1) GNZS703E-HB Shale Shaker with 3 panel shaker screen
One(1) GNZS703J-1S8N Mud Cleaner with 3 panel shaker screen & 1 desander cone & 8 desilter cone
One(1) Mud tank same as 20ft container size, this working as mud recycling tank
Accessories: pump & mixing hopper & valves & handrails etc.
See details from GN website: http://www.gnsolidscontrol.com/drilling-fluids/gn-500gpm-hdd-mud-system-china-petroleum-pipeline-bureau-cpp
Control panel is electrical control for Decanter Centrifuge. Different decanter centrifuge has different kinds of control panel. Flame Ex-proof small control panel is used for fixed speed centrifuge; A bigger PLC positive pressurized control panel is used for variable frequency drive centrifuge. GN can offer different type of decanter centrifuge as below:
Control panel is electrical control for Decanter Centrifuge. Different decanter centrifuge has different kinds of control panel. Flame Ex-proof small control panel is used for fixed speed centrifuge; A bigger PLC positive pressurized control panel is used for variable frequency drive centrifuge. GN can offer different type of decanter centrifuge as below:
High standard & variable speed centrifuge: GNLW363BG-VFD
High standard & Fixed speed centrifuge: GNLW363BG
Economic standard & variable speed centrifuge: GNLW363BD-VFD
Economic standard & Fixed speed centrifuge: GNLW363BD
Dimension: PLC VFD control panel: 800x500x1200mm; conventional VFD control panel: 800x500x2000mm; The former one is more compact and easy for transportation.
Operation: conventional VFD control panel is manually operation with some buttons. The PLC control panel is touch screen operation, with more detailed information.
Screw conveyor is widely used in drilling mud solids control & waste management as important transportation equipment. Proper use of screw conveyor can make the field job with small footprint and high working efficiency. Let’s draw some conclusions on screw conveyor application in drilling waste management.
Screw conveyor is widely used in drilling mud solids control & waste management as important transportation equipment. Proper use of screw conveyor can make the field job with small footprint and high working efficiency. Let’s draw some conclusions on screw conveyor application in drilling waste management.
The screw conveyor can positioned paralleled with solids control system, equipment like shale shaker, desander, desilter (or mud cleaner, combination of desander & desilter). The paralleled screw conveyor can collect the drilling cuttings discharged from solids control equipment and transport to next slant screw conveyor. This screw conveyor is for feeding for Hi-G dryer or Vertical-G dryer.
GN drilling waste management system, the first separation phase is generally equipped with Hi-G dryer or Vertical-G dryer. They both can be used for water based mud, oil based mud & synthetic based mud. Generally, the Hi-G dryer is more proper for water based mud; vertical-G dryer is more proper for synthetic based mud with comprehensive consideration.
The screw conveyor can make the feeding more even/homogeneous, in this case, the working performance of Hi-G dryer or vertical-G dryer can be stable.
Vertical-G dryer working jobsite video: http://www.gnsolidscontrol.com/video/vertical-cuttings-dryer-water-based-mud-drilling-waste
Decanter Centrifuge working jobsite video: http://www.gnsolidscontrol.com/video/water-based-mud-decanter-centrifuge-argentina
Continue reading “Screw Conveyor Application in Drilling Waste Management”
To acheive zero discharge for the drilling mud, GN Solids Control provide the dewatering decanter centrifuge with the flocculent unit.
The GN1500 Series 20FT Dewatering Unit provides a process of chemically enhanced configuration to remove the fine solids less than 5 microns from the water based drilling fluids.
Traditional Solids Control Equipment:
As it known that traditional solids control equipments like shale shaker,desander desilter, and decanter centrifuge will removes solids upper than 5 microns, for colloidal-size particles which is less than 5 microns will build up in the drilling mud system. To maintain the drilling mud properties, the operators have to dilute the drilling fluids with water, this consumes more water and create more drilling waste.
Advantage to use flocculent unit for the dewatering decanter centrifuge:
By utilizing the GN1500 20FT dewatering flocculent unit, the result is a chemically enhanced flocculation of colloidal and ultra-fine drilled solids that can be efficiently removed with a GN dewatering centrifuge.
For limited and zero discharged closed loop system, the GN dewatering unit is a very important unit to keep the mud clean and reduce the drilling waste which has to be sent for treatment and disposal. Before entering the dewatering phase, for the weighted drilling mud, firstly it enters a barite recovery centrifuge to recovery the barite to the active mud system.
The GN 20 Ft containerized dewatering unit can be transported as a standard 20 ft container The system includes all the standard dewatering components .GN also have the dewatering decanter centrifuge available can be mounted on a separate telescoping skid or on the drilling mud tank. Continue reading “Dewatering Centrifuge with FLOCCULENT UNIT”
Decanter Centrifuge can be used in many applications, like solids control system for oil drilling, mud treatment unit for sludge treatment and also can be used for water/oily waste treatment. In order to make the centrifuge easy to lift and transport, the customer prefer to protection framework decanter centrifuge with VFD control panel and feed pump.
Decanter Centrifuge can be used in many applications, like solids control system for oil drilling, mud treatment unit for sludge treatment and also can be used for water/oily waste treatment. In order to make the centrifuge easy to lift and transport, the customer prefer to protection framework decanter centrifuge with VFD control panel and feed pump.
GN Solids Control just got Purchase Order of protection framework decanter centrifuge from drilling sludge treatment customer. After discussion, the customer confirm on high speed decanter centrifuge GNLW363BG-VFD with Netzsch brand NEMO pump for feeding & Variable Frequency Drive PLC control panel. Pls find details as below:
GN Solids Control is professional drilling waste management equipment manufacturer; after some years experience accumulation, GN Solids Control can offer professional solution on drilling waste management. This chapter will give a comprehensive knowledge of drilling waste (OBM & WBM) :
Drilling waste management and zero discharge is a getting much popular recent years. It is important to get zero discharge on drilling waste management. Many EPC company wanna source professional equipment and professional personnel on the potential projects with large profit. The the drilling waste market capacity can reach 17 billion before 2018, it is said.
GN Solids Control is leading manufacturer for drilling waste management equipment & solids control equipment; after some years experience accumulation, GN Solids Control can offer professional solution on drilling waste management and can answer the question most of the people faced with ” How to achieve zero discharge on drilling waste management “. This chapter will give a comprehensive knowledge of drilling waste (OBM & WBM) from three parts as below. And tell people how to achieve zero discharge on drilling waste management in Part 3.
Source 1: Drilling waste from oil based mud drilling operations. The assessment is yet to be conducted
Souce 2: Refinery waste: Most of it is waste water, sludge, and the usual refineries waste ingredients. The refinery waste will be first recovered from large ponds and for those ponds to be remediated to original status where we will plant them with trees.
Source 3: Storage tank sludge: The tanks are yet to be calculated in terms of number and storage capacity. However, they are estimated to exceed the 50 tanks mark.
Source 4: Oil pits (there are many oil pits and waste management service company are trying to do land remediation to original state which means they will treat the crude to get it back to its crude status, soil back to soil and water to be recovered):
Oil pit case from Iraq drilling waste management market:
Continue reading “How to achieve Zero Discharge on Drilling Waste Management”
Different country has different special requirement on drilling rig mud system for oil drilling. GN Solids Control can offer different special requirement on equipment which can satisfy most of customer’s request. GN Solids Control can offer drilling solids control mud system with IEC EX/ATEX/CE certificate. Besides, GN can also accept BV or DNV third party inspection.
Different country has different special requirement on drilling rig mud system for oil drilling. GN Solids Control can offer different special requirement on equipment which can satisfy most of customer’s request. GN Solids Control can offer drilling solids control mud system with IEC EX/ATEX/CE certificate. Besides, GN can also accept BV or DNV third party inspection. Recently, we exported one set 1000HP drilling rig mud system to Europe company with CE & ATEX certificate. The mud system have configuration as below:
Recently, we got tender invitation from Shell in Middle East. We also have cooperation with Shell China. They have some special requirement on solids control equipment.
Two shale shakers capable of handling 10.5 ppg mud weight at 1000 gpm.The electric motors for shale shakers DO NOT HAVE TO BE ZONE CLASSIFIED AS OPERATION IS NOT IN A LIVE HYDROCARBON ENVIRONMENT. Common header tank for all shale shakers. Mud return flow lines shall enter from the rear at the base of each shale shaker header tank, mud gas sensor to be installed in the header box and readings screen within the drillers control cabin and Cement bypass to be installed. Supply screens for the shale shakers as per the clients recommendations, screen sizes will be supplied at later date.
GN Solids Control Shale shaker, GNZS594E-HB can meet the requirement for this tender file.
