Author: admin

Vertical Cuttings Dryer is key equipment for drilling cuttings treatment. During drilling process, the customer may use water based mud for former stage operation, and oil base mud may be coming later for deep drilling operation. Some customer may buy two sets on line drilling cuttings treatment for water based mud and oil based mud separately. Some user want to reduce budget and only prepare one set on line drilling cuttings treatment for water based mud and oil based mud drilling cuttings.

Hi-G dryer shaker:  Hi-G dryer is popular used for water based mud drilling cuttings treatment. After Hi-G dryer, high speed centrifuge will be followed for further treating. After treated by centrifuge, solids parts can be used for construction; liquid part can be further treatment by flocculent unit.

Vertical-G dryer:  Vertical-G dryer is popular used for oil based mud drilling cuttings treatment. After treated by Vertical-G dryer, the solids control can be further treated by TDU; the liquid part can be transferred to shale shaker again. Or collect the liquid part into catching tank and use high speed centrifuge. Continue reading “Vertical-G dryer & Hi-G dryer for Drilling Cuttings Treatment”

Mud tank is the base for mud system, all the solids control equipment should be mounted on mud tank for operation. We have large quantity of mud tank sales in domestic market; for overseas market, we recommend customer do it locally to avoid pretty high freight cost. However, there are still some customers from Middle East and Africa bought mud tanks from us due to instable of local political issues.

Recently, we ship one mud tank with mud agitators, mud guns to Iraq. The customer is locally oil service company with many years industrial experience. The mud tank will be used as drilling mud storage tank.

Continue reading “Mud tank system to Iraq drilling”

Saudi Arabia is high end market for importing equipment, same case for oil drilling field solids control equipment. GN Solids Control is position on high end overseas market, like Saudi Arabia, Iran, Kuwait, Turkey, Yemen, Israel etc. Middle East Countries.

Recently, we receive purchase order from Saudi Arabia HDD contractor. The customer make mud tanks locally and buy solids control equipment from us.  The equipment in the PO including:

• Mud cleaner, GNZJ594-2S12N, 2 SETS
• Centrifugal Pump, GNSB8X6J, 6 SETS
• Start and stop control panel for centrifugal pump, star-delta starting, 6 SETS
• Mud Hopper, 2 SETS
• Spare parts, 1 sets
• Mongoose composite material shaker screen as spare parts for Mud Cleaner, 36pcs

Continue reading “Solids Control Equipment for Saudi Arabia”

GN Solids Control, as China leading solids control & waste management equipment supplier, is the first company to enter international oil drilling market. After over 5 years growth and market experience accumulation, GN got one big order from Baker Hughes, which is one of the world’s largest oilfield services companies.

The person is from Baker Hughes Russia region. Actually before that, we have some customer from Russia who have cooperated with GN many years and they have some jobsite available. After Baker Hughes people check GN equipment jobsite, then they come to China and visit our headquarter close to Beijing. The production capacity and management is impressed; the centrifuge and vertical cuttings dryer ( VG Dryer) in stock is also interesting.  After two days depth of negotiation, Baker Hughes appreciate GN professional on solids control & waste management, then release Purchase Order of 4 sets Decanter Centrifuge with VG dryer.

4 sets Decanter Centrifuge

The centrifuge is GNLW363BG-VFD model with VFD control panel and touch screen operation. This centrifuge is also the most popular model, annual sales amount over 150 sets to over 60 countries and areas all over the world.

GNLW363BG-VFD with extensive application can be used for solids control ( barite recovery, mud weight cutting) and also drilling waste management ( remove fine solids from drilling cuttings) and also waste water treatment.

GN Centrifuge Working Video: http://www.gnsolidscontrol.com/video/water-based-mud-decanter-centrifuge-argentina

4 sets Vertical Cuttings Dryer

VG Dryer is new product for China manufacturer. GN Solids Control is the first company who do R & D on it. After first generation and second generation VG dryer, now GN win many market with third generation VG dryer. Many customer shift to GN from Swaco Dryer and SCI Dryer.

GN VG dryer can be used for both water based mud and oil based mud.

GN Solids Control centrifuge is widely used in different field application. Recently, we have 3 sets of centrifuge ready for delivery to Middle East. 1 set big bowl big capacity variable speed centrifuge GNLW553-VFD, 1 set high speed and fixed speed centrifuge GNLW363BG and 1 set high speed and fixed speed mini centrifuge The customer use the centrifuge for oil sludge treatment.

22’’ centrifuge GNLW553-VFD – Big bowl big capacity

GNLW553-VFD is the big bowl centrifuge from GN Solids Control. This is mainly used for fast drilling cut mud weight or micro tunneling projects. It can also be used for fine/ultra fine solids separation, barite recovery and zero-discharge dewatering.

GNLW553 centrifuge only variable speed available. The centrifuge can start with one separate VFD control panel. The centrifuge can start from 0 to 2500rpm smoothly and will not arouse very big momentary current. A 200kva generator is OK.

Continue reading “Decanter Centrifuge for Oil Sludge Treatment”

Decanter Centrifuge is important equipment for oil and gas drilling field, especially for solids control and waste management. There are different centrifuge model with different speed. How to match proper centrifuge speed for different projects? This is an important issue.

Question 1: HOW to buy fixed speed centrifuge or variable speed centrifuge?

Continue reading “How to match proper centrifuge speed for project”

GN Solids Control is much professional in compact HDD mud system manufacturing. Recently we got purchase order from Russia and the end user is HDD contractor with Prime Drilling Rig. They want to match a small mud system to recycle the drilling mud effectively to save cost. After we show our project list for different users with Ditch Witch Rig, Vermeer Rig, American Augers Rig, the prime drilling rig customer is much impressive on GN compact mud system.

Prime Drilling Rig Mud System

Now the Prime drilling rig mud system is ready for delivery. It is equipped with solids control equipment as below:

one unit of small mud tank which can be put into one 20feet container;

one unit of mini mud cleaner with 2 panel shale shaker ( GNZS752) and 4 each 4inch desilter cones; the treating capacity is 200gpm.

One unit of centrifugal pump installed in slope tank for feeding desilter cones

One unit of centrifugal pump installed in the end of the mud tank to mixing hopper.

One unit of centrifugal pump as spare parts, which can be replace each of the pump for feeding desilter cone or for mixing hoppper

one unit of mixing hopper, 4 inch.

One unit of control panel; the user just need to plug the power generator with the control panel and then can use the the compact mud system. If for generator, it may require 100KW generator. We can also buy the generator for customer and match for them.

 

Continue reading “Prime Drilling Rig HDD mud system”

GN Solids Control have some equipment ready for delivery recently.  See below List:

1) two sets poor boy degasser ready for delivery to Indonesia

2) one set cuttings dryer equipment ready for delivery to North-West of China

3) one set drilling waste management system ready for delivery to western Africa

4) one set framwork decanter centrifuge ready for delivery to North Africa

GN Decanter Centrifuge

GN Solids Control Framework Decanter centrifuge is easy for lifting when loading and unloading. The Netzsch brand Nemo pump for feeding centrifuge also mount on the skid, thus make it as compact unit. The end user use this for waste water treatment.  See below of technical specifications.

Centrifuge model: GNLW363BG-VFD

Centrifuge type: high speed & variable speed centrifuge which can be used for fine solids separation (drilling waste management); mud weight cuttings (solids control); barite recovery (solids control);

Centrifuge production material:  Bowl cylindrical and conical section production material- duplex stainless steel 2205 by centrifugal casting; Other parts of the bowl assembly production material – Stainless Steel 316L. Screw protection production material – Tungsten Carbide alloy tiles for longer life. Genuine SKF bearing for better working performance and longer time.

GN Solids Decanter Centrifuge working video at jobsite: http://www.gnsolidscontrol.com/video/water-based-mud-decanter-centrifuge-argentina

GN vertical cuttings dryer

One set cuttings dryer equipment is ready for delivery to North-West of China customer. The customer use the Vertical cuttings dryer for oil sludge treatment. They are famous oil service company. Most of the project is from CNPC.  GN 2nd Vertical cuttings dryer with below points technical specs.

Dryer model: GNCD930C

Dryer type: middle speed & fixed speed vertical dryer which can be used to recycle the base mud from the drilling wast. Thus, to promote the use efficiency of drilling mud.

Dryer is equipped with air line, scraper and basket screen. The air line need a stable and strong air to blow the screen basket during working.

GN Solids Vertical cuttings dryer working video at jobsite:  http://www.gnsolidscontrol.com/video/vertical-cuttings-dryer-water-based-mud-drilling-waste

Up to now, GN Solids Control have mature solids control equipment models. This can meet most of the requirement from end users, but not all. Some special requirement from customers, we have to take more time to do some necessary works. Eg. Shale shaker. GN Solids Control have 3 basic model shale shaker, GNZS752 series shaker, GNZS703 series shaker and GNZS594 series shaker. The treating capacity is 200gpm, 500gpm and 600gpm separately.  For workover rig or small geothermal rig, the separate shale shaker is enough to treat the returned drilling mud from rig, but for large oil drilling rig, 2 or 3 sets of shale shaker generally required.

Dual Connection Shale Shaker

GN just got Purchase order from Egypt Drilling Company. They require one set Dual connection shale shaker. The dual connection shale shaker should come with distributor to separate the drilling mud evenly from the well. GN Solids Control connect two sets GNZS703 series shale shaker with same big base to connect. You can see more details from the pictures.

GN 1000gpm Dual connection shale shaker technical specs:

Shaker model: GNZS703E-HB

Shaker qty:  2 sets

Total treating capacity: 1000gpm

For details of GN shale shaker, pls check on GN website: http://www.gnsolidscontrol.com/shale-shaker/

Continue reading “1000gpm Dual Connection Shale Shaker”

In order to give profit back to GN masses of users, now GN have 5 sets of shale shaker & 4 sets of mud cleaner in stock for fast sale. The customer who can give orders ranking in top ten customer within August, 2014 can get 30% big discount, much cheaper than original price.  The customer can only buy 1 set shale shaker or 1 set mud cleaner. Limited quantity available, quick to response if you want to buy.

Five sets of drilling fluids shale shaker

The shale shaker in stock is oilfield solids control shale shaker, large treating capacity 600gpm shale shaker GNZS594E-HB. This shale shaker with 4 panel Swaco Mongoose shaker screen is substitute goods for Swaco 4 panel shaker or Derrick 4 panel shaker. See below technical paratmers:

Model name: GNZS594E-HB

Role:  used for oil drilling rig mud system, eg. 750hp workover rig mud system, 1000hp oil drilling rig mud system, 1500hp oil drilling rig mud system, 2000hp oil drilling rig mud system, 2500hp oil drilling rig mud system. Also can be used for geothermal drilling rig, shale gas drilling rig etc. unbalanced drilling rig.

Capacity:  600 gallon per minutes handling capacity make this shale shaker outstanding from other model. The 4 panel shaker screen contribute to the large screen area 2.7261cbm.

Shaker screen: shaker screen is a wearing parts. GN can offer Swaco mongoose shaker screen with good quality and reasonable price. The customer can buy some in stock for fast use or fast sale to other friends.

One year spare parts: GN Shaker screen with small spare parts can simplify the operation of shale shaker, time saving and cost saving.

Continue reading “Shale shaker & Mud Cleaner in stock for Fast SALE”