Author: admin

Recently, three sets of GNLW224EP-VFD decanter decanter centrifuges produced by GN Solids Control are sold to European environmental protection companies for sludge dewatering. The three sets of GNLW224EP-VFD sludge dewatering centrifuges produced by GN Solids Control are compatible with European environmental protection companies. this solution include feed pump also.After in-depth communication with customers, the centrifuge integrated system customized for customers based on the actual working conditions of the customer’s site fully met the customer’s product requirements and won praise from customers. Customers are very grateful to the sludge dewatering centrifuge produced by our company for solving the problems of on-site sludge dewatering and small footprint. They have a very high recognition of our centrifuge and look forward to follow-up cooperation.

Features of GNLW224EP-VFD Decanter Centrifuge:

1. The large and small end cover shafts, rotating drums and spiral mandrels are made of duplex stainless steel SUS2205 by centrifugal casting, and their performance is better than SUS304 and SUS316 in the same industry.

2. The main parts are made by centrifugal casting and die forging technology to avoid the quality defects of intergranular corrosion and incomplete residual stress release caused by traditional welding technology.

3. The main material of the screw pusher is made of duplex stainless steel SS2205, SS2304 or higher material, and the spiral blades are integrally pressed by CNC spiral blade forming equipment to improve the efficiency of screw slag conveying.

4. The slag discharge port is protected by a replaceable hard alloy sleeve. The top and side of the slag discharge port of the drum are installed with cemented carbide scrapers, which can effectively protect the drum and prevent wear. The 360-degree rectangular slag discharge port, slag discharge Smoothly prevents clogging.

5. According to the material handling requirements, the spiral can use BD baffle to separate the dewatering zone and the settling zone deeper, and the dewatering zone is longer.

6, PLC control panel control, the sensor can be placed on the centrifuge to monitor the state of the machine.

If you want to know more about GN Solids Control, we sincerely welcome you to inquire or visit our company.

Recently, a set of sewage treatment centrifuge with dosing device produced by GN Solids Control will be sent to customers in the Middle East. The centrifuge of this project adopts intelligent, automated, and efficient customized design according to customer requirements. The machine trial effect is very satisfactory.

Features of chemical dosing equipment:

1. Three tanks in one (mixing tank, mixing tank, storage tank) continuous brewing, easy operation and maintenance, low labor cost; according to actual needs, it can be changed to double tank type to make it more economical and reasonable;

2. The machine has the function of proportioning allocation, which can adjust the concentration of liquid medicine required for brewing according to actual needs;

3. The brewing concentration of this machine is uniform and moderate, which can reduce the occurrence of granulation caused by improper manual deployment, which will block the pipeline or pump, and increase unnecessary maintenance costs and powder expenditure;

4. The fusion effect of the medicine and liquid mixer reaches 100%, with unique innovative functions;

5. The machine is uniquely designed with stand-by time and automatic intermittent and paused cross-stirring functions, so that the infusion solution can be uniformly blended and kept in the best use state forever; when the powder supply tank is low in stock, the indicator of the appliance is detected by induction The function assistance of warning and stopping of the dosing pump makes the overall controllability of the machine more perfect.

Features of GN Solids Control 454E series decanter centrifuge:

1. The drum is made of duplex stainless steel SS2305 by centrifugal casting, and its performance is better than SS304 and SS316.

2. The centrifugal casting process makes the drum more uniform in texture and has good dynamic balance performance.

3. The slag discharge port of the centrifuge and the slurry outlet of the screw pusher are inlaid with tungsten carbide cemented carbide sleeves, which are extremely wear-resistant and not easy to break.

4. The screw pusher is inlaid with wear-resistant alloy sheets, which has a longer life and reduces the number of maintenance.

5. PLC control panel control, sensors can be placed on the centrifuge to monitor the status of the machine. GN Solids Control focuses on the R&D and manufacturing of separation and conveying equipment. E series decanter centrifuges are mainly suitable for solid-liquid separation of mineral oil, chemical viscous materials, fruit juice, coffee, tea, wine, soy milk, biodiesel, starch, etc.

If you want to know more about GN Solids Control, we sincerely welcome you to inquire or visit our company.

Recently, a set of construction slurry treatment system produced by GN Solids Control has been put into use in construction mud treatment stations in North America, and the system has been successfully introduced to the international market, and will soon be sent to foreign customers, including the Middle East, Southeast Asia and other regions Engineering construction unit. The system has the characteristics of small footprint, low cost, and significant treatment effect, and can also be widely used in tunnel shield and pipe jacking projects and trenchless directional crossing projects.

This mud separation system is mainly composed of four solid-liquid separation modules: coarse screening, vibrating screen, desanding and desilting cyclone and decanter centrifugal dehydrator. Its working principle is as follows:

1. The mud tanker transports the mud produced by urban construction to the treatment station. First, the big rocks are filtered out through the collecting funnel, and then the small rocks are screened out through the coarse screen. The remaining mud is filtered and collected to the transfer station. In a jar

2. The slurry supply pump pumps the slurry from the transfer tank to the vibrating screen for further solid phase separation and removes the large particles of sand and gravel;

3. After the mud passes through the shale shaker for preliminary solid-liquid separation, it is pressurized to the desander cyclone by the slurry pump in the system. After high-speed cyclone separation, the grit components with a particle diameter greater than 40 microns are removed, and the fine sand is separated into the transfer tank, and then pressurized by the slurry supply pump to the desilting cyclone. The desilting cyclone will be more than 20 microns The particles are separated, and the mud below 20 microns is returned to the mud storage tank and pumped to the construction machinery for recycling after reproportioning.

4. The high-speed centrifugal dewatering centrifuge equipped with this system can separate the fine particles of 5-20 microns in the mud to ensure the performance of the mud.

Centrifuges produced by GN Solids Control are widely used in drilling mud treatment, sewage environmental protection treatment, oily sludge treatment, chemical and food and beverage industries.

If you want to know more about GN Solids Control, we sincerely welcome you to inquire or visit our company.

A few days ago, two sets of 20 cubic waste slurry treatment systems designed and manufactured by GN Solids Control for Singapore customers have been used in the customer’s shield slurry treatment site.

The waste slurry treatment system complies with Singapore’s national environmental protection requirements and adopts a containerized design. The system is mainly composed of a decanter centrifuge, a flocculation system and a container, which satisfies the integration, harmlessness and reduction in the urban construction process. It also adopts sealing and noise reduction treatment as a whole, which reduces the impact on the lives of surrounding residents during the construction process.

The centrifuge adopts the high-speed dewatering centrifuge of the purification system. This centrifuge is a special customized centrifuge that can treat both ordinary mud and waste mud. The flocculation system is also a specific flocculation system. 3 chemical agents can be added to meet Different needs of customers.

GN Solids Control’s mud purification system and sludge dewatering equipment have attracted much attention in the international market, word of mouth, and there are sufficient market cases in China. Shield engineering customers include China Railway Tunnel, China Railway Tunnel Two, China Railway 18th Bureau and China Railway Shield construction and mud treatment companies such as environmental engineering companies. Shield machine manufacturing supporting customers include China Railway Equipment, German Herrenknecht and other large shield machine equipment companies. The strong R&D and manufacturing capabilities and rich industry experience have won customers’ full trust.

GN Solids Control can also design and manufacture mud recovery systems according to customer requirements and provide constructive suggestions.

If you want to know more about GN Solids Control, we sincerely welcome you to inquire or visit our company.

Recently, two GNLW224D-GP series small solid-liquid separation decanter centrifuges and related sludge transfer pumps produced by GN Solids Control are sold to a foreign environmental protection company. The sludge transfer pumps include horizontal centrifugal pumps and solid vacuum pumps.

The GNLW224D-GP series decanter centrifuge of this project is designed with a single processing capacity of 5m3/h, with a maximum design speed of 4500RPM and a standard speed of 3800RPM. The designed maximum separation factor is 2492G, and the separation particle diameter is 2-5μm. The torque of the differential is 500N.M, and the power of the main motor is 11KW. Centrifuges produced by GN Solids Control are widely used in drilling mud treatment, sewage environmental protection treatment, oily sludge treatment, solid-liquid separation in the chemical and food and beverage industries.

The GNSP-10B series solid vacuum pump of this project is also called pneumatic conveying pump. Because it can convey materials with higher solid content by using the internal vacuum pressure of the equipment, it is also called solid vacuum pump. The designed flow rate of a single unit is 10m3/h, and the air supply demand is 4.3m³/min. Because of its strong transportation capacity, high work efficiency, low equipment failure rate, simple operation and maintenance, etc., it is favored by the majority of environmental protection customers. In addition, this equipment can also be used to clean ship cabins, clean mud tanks, transport drilling waste, transport drill cuttings, Various purposes such as cleaning up drilling platforms.

GN Solid Control focuses on the R&D and manufacturing of separation and conveying equipment. If you want to know more, we sincerely welcome you to inquire or visit our company.

If you want to know more about GN Solids Control, we sincerely welcome you to inquire or visit our company.

Recently, the separate skid-mounted cuttings dryer and drilling mud jet mixing device produced by GN Solids Control have been assembled and debugged and will be sent to a domestic drilling company.

The project mainly includes 5 GNCD930-GP vertical cuttings dryers and 4 300m³/h drilling mud jet mixing devices. Vertical cuttings dryers are used on offshore platforms, mobile workboats, land oil fields, etc. This equipment is designed to be used in a class of equipment for oil drilling waste treatment operations, which can realize oil-bearing drilling cuttings de-oiling treatment and water-based drilling cuttings It uses high-power broadband dual motors as the power source for functions such as reduction and emission compliance. The processing capacity of the cuttings dryer is 30-50 tons/hour. The upper part of the equipment is conical and the lower part is cylindrical. This equipment is suitable for marine, desert and land oil field operating environments.

The jet mixing hopper device, as its name implies, refers to the mixing of water, clay (mostly bentonite) and other chemicals through the jet effect produced by the venturi funnel to achieve the effect of mixing drilling mud. Usually in the process of oil drilling and natural gas well drilling, drilling fluid can help cement the hole wall to prevent collapse during drilling rig drilling. Drilling fluid is also called drilling mud, usually divided into three categories: water-based Mud (abbreviated as WBM), oil-based mud (abbreviated as OBM) and synthetic-based mud (SBM).

GN Solids Control now has multiple sets of cuttings drying systems serving multiple oil fields in China, and processing water-based cuttings and oil-based cuttings separately. In addition, GN Solids Control also reached a strategic cooperation agreement with AKROS, a major Russian mud service company, and became a supplier of Gazprom (Gazprom for short), supplying solids control equipment all year round.

If you want to know more about GN Solids Control, we sincerely welcome you to inquire or visit our company.

Recently, employees of GN Solids Control are busy with the commissioning of the mud station project. This order is an integral part of the end customer’s 30000BBL mud station project. The order will be shipped to end customers in South America in the near future.

GN Solids Control is unanimously committed to providing customers around the world with a variety of mud service equipment, which can deal with OBM oil-based mud, WBM water-based mud and SBM composite-based mud. In order to meet the diverse needs of customers, GN Solids Control can also implement customized design and production for customers.

The mud station orders that have been shipped this time mainly include the following equipment:

1. 500BBL mixing tank

The mixing tank contains 2 sets of non-interference mud mixing hopper, which are powered by 2 independent submersible pumps. When one pump fails, the other submersible pump can be easily switched to avoid downtime.

The mixing tank adopts 2 sets of two-impeller mud agitators to prevent the drilling mud from sedimentation. In addition, it is also equipped with 2 mud guns for fixed-point flushing of the corners of the tank.

The top of the mud tank is made of mesh board. This 500BBL mixing tank adopts a skid-mounted structure, with a small rectangular size, and can be moved by a flatbed truck.

2. 7000BBL storage tank system

After the drilling mud is mixed and stirred, a centrifugal pump with quick couplings transports the drilling mud to the storage tank. The storage tank system has 14 vertical storage tanks of 500 barrels, with a total storage capacity of 7000 barrels.

These 14 vertical storage tanks are all designed with magnetic flap level gauges to display the liquid level. On the other side of the storage tank, a horizontal base is designed. When the storage tank needs to be placed horizontally, the horizontal base can ensure the stability of the storage tank. Another centrifugal pump can be used to suck and discharge the mud from the storage tank, or to suck the mud from the mixing tank.

As a leading supplier of solids control equipment and drilling waste management systems, GN Solids Control is committed to providing cost-effective solutions to global customers. If you are interested in this, welcome to contact us! If you want to know more about GN Solids Control, we sincerely welcome you to inquire or visit our company.

Recently, the small solid-liquid separation complete system equipment produced by GN Solids Control has undergone rigorous testing in the factory and is ready to be loaded and shipped to the European customer project site.

Big quantity orders of GN Solids Control come from repeat orders from old customers. It is believed that the stable quality and performance of GN’s products can give customers confidence in GN Solids Control’s products.

So what are the characteristics of GN Solids Control equipment that can stand out among many domestic solid control counterparts? The following introduces the advantages and characteristics of the core products of this system, GNLW223D-VFD decanter centrifuge and GNZS752F-MDZF vibrating screen;

GNLW223D-VFD decanter centrifuge parameters:

Centrifuge model GNLW223D has a critical capacity of 130 l/min;

Conventional throughput 100 l/min, drum diameter 9inch (220mm);

Drum length 26. .4inch (670mm) critical drum speed 4500RPM;

Conventional drum speed 3800RPM separation factor (critical) 2492G;

Separation factor (conventional) 1777G main motor power 15HP (11KW)

GNZS752F-MDZF shale shaker parameters

Model GN ZS 752F-M D ZF Vibration track straight line;

Processing capacity (m:/h) 45 Vibration motor power (kw) 2×1.0;

Number of screens (pieces) 2 Screen size (mm) 750x 900;

Screening area (m2) | 1.35 Excitation strength ≤7.5G;

Double amplitude (mm) 4.14-5.96 Screen box adjustment angle +2°;

Mud tank type overhead cofferdam height (mm) 714;

Weight (dry grams) 929 length x width x height (mm) | 1816 x 1657 X 1083

In addition to the small solid-liquid separation system introduced above, GN Solids Control also produces a complete set of oil&gas drilling solids control systems, trenchless and CBM drilling mud recovery systems, piling and shield mud purification systems, drilling waste treatment systems, industrial environmental protection Solid-liquid separation system such as mining. If you want to know more about GN Solids Control, we sincerely welcome you to inquire or visit our company.

Recently, two small snail sludge dewatering machines produced by GN Solids Control supporting flocculation dosing systems are sold to Southeast Asia and used for waste treatment in food factories.

The GN Solids Control screw sludge dewatering machine is an economical and environmentally friendly sludge dewatering equipment. It uses the principle of screw extrusion to generate strong extrusion force through changes in screw diameter and pitch, as well as the small size between the moving ring and the fixed ring. The gap is a new type of solid-liquid separation equipment for squeezing and dewatering sludge.

The GN Solids Control snail sludge dewatering machine is composed of a fully automatic control cabinet, a flocculation modulation box, a sludge thickening and dewatering host, and a sump. The GN Solids Control sludge dewatering machine is equipped with GN Solids Control automatic control technology, which can realize flocculation under the condition of fully automatic operation, and continuously complete the sludge thickening and squeezing dewatering work, and return or discharge the collected filtrate.

GN Solids Control screw stacking machine is widely used in municipal sewage treatment projects and sewage sludge treatment in aquaculture, food, starch, grease, pharmaceutical, chemical, paper, leather and other industries.

Advantages of snail sludge dewatering machine:

1. It is suitable for a wide range of sludge dewatering and can be used for oily sludge treatment.

2. The equipment runs continuously and automatically, and it is not easy to be blocked.

3. Low investment and operating costs, and no secondary pollution.

4. Energy saving and environmental protection, and the equipment covers a small area.

5. The sludge can be dehydrated under aerobic conditions to avoid the release of phosphorus from anaerobic sludge dehydration

If you want to know more about GN Solids Control, we sincerely welcome you to inquire or visit our company.

Recently, the GN Solids Control decanter centrifuge and screw conveyor equipment have undergone rigorous testing in the factory and are ready to be loaded and shipped to the wastewater treatment company.

Many orders of GN Solids Control come from repeat orders from regular customers. I believe that the stable quality and outstanding performance of GN Solids Control products can give customers strong confidence in GN Solids Control ‘s products.

So what are the characteristics of GN Solids Control equipment that can stand out among many domestic solid control counterparts? The following introduces the advantages and characteristics of GN Solids Control decanter centrifuge;

Advantages and characteristics of GN Solids Control decanter centrifuge:

1. Drum material: duplex stainless steel 2304; screw pusher: duplex stainless steel 2205;

2. The main bearing is lubricated with dilute oil, the bearing runs better, can reach higher speeds, and is equipped with a lubrication protection system, which can still provide lubrication for 5-10 minutes after a sudden power failure;

3. Larger aspect ratio (4.2:1 aspect ratio) and deeper liquid pool depth mean better treatment effect and larger treatment capacity;

4. According to the nature and concentration of the material, use motors and differentials of different powers. (554EP uses large differential speed, high-power motors ensure processing capacity; 554EC and EY use large speed ratios and small differential speeds, and low-power motors are more energy-efficient. );

5. A shock absorber is installed under the motor to avoid the impact of vibration between the motor and the centrifuge host;

6. The upper cover of the collection box adopts a double-layer structure and is lined with soundproof cotton, which reduces the noise of the centrifuge;

7. The collection box is equipped with a flushing pipe, so customers can flush the collection box even more;

8. Equipped with scraper and end scraper to prevent wear from turning solid, and equipped with slag stop ring to prevent material blocking on the solid side of the collection box;

9. Three kinds of centrifuges, three different angles, three different pitches, and BD plates with corresponding diameters can be designed according to the different material concentrations to achieve better processing effects;

10. For the materials with high solid content and easy to cause wear, EP centrifuges have added slag discharge wear resistant wear sleeves, slurry outlet wear resistant sleeves, and wear-resistant alloy sheets are inlaid on the screw pusher, while EC The CY centrifuge mainly handles materials with low solid content and not easy to cause abrasion, and wear-resistant alloys are spray-welded on the liquid outlet and spiral blades;

In addition to the decanter centrifuge introduced above, GN Solids Control also produces a complete set of oil drilling solids control systems, trenchless and coalbed methane drilling rig mud recovery systems, piling and shield mud purification systems, drilling waste treatment systems, industrial environmental protection mining And other solid-liquid separation system.

If you are interested about our product, welcome contact us