Author: admin

Recently, a set of sludge solidification equipment produced by our company GN Solids Control has been assembled and debugged, and will soon be sent to the geothermal well drilling construction site in a China important city to help the construction of the new area of ​​the motherland.

This set of curing equipment is mainly used for the curing of drilling cuttings, and its processing capacity can reach 15m³/h. This system is divided into two skid-mounted parts, namely the drill cuttings storage skid and the curing mixing skid. Drill cuttings storage hopper and solidification mixer are respectively installed on two skids, and the two devices are independent into skids, which is flexible in layout and convenient for shipment.

The system workflow of the sludge curing equipment produced by GN Solids Control is:

1. First, the drill cuttings storage funnel is used to store and receive drilling mud or waste, and then the material is transported to the solidification mixer at a certain flow rate through the screw conveyor at the bottom.

2. The chemical agent in the chemical additive storage box is sent to the curing mixer through a screw conveyor. In this system, the platform of the storage box is designed with a floating platform extending to both sides, which is conducive to the construction personnel to stack chemicals here. Additives for easy construction and efficient work.

3. The materials and chemical additives are fully mixed in the curing mixer, and the materials continue to move toward the outlet of the curing mixer. When the materials are delivered to the outlet, the curing process has been completed. The system also reserves a liquid phase addition port at the inlet of the curing mixer, which can add water, acid, alkali and other chemicals required for curing.

GN Solids Control sludge curing system is to fully mix the curing agent and the material in the curing mixer to complete the curing. During the operation of this system, the adding ratio of materials and curing agent can be set in advance. After the setting is completed, the system can be operated automatically, which greatly reduces labor costs.

Recently, our company GN Solids Control. has successfully equipped a vacuum deaerator and sand pump for foreign Indonesian drilling customers for the supporting use of workover rigs and customer on-site solids control equipment for Indonesian customers.

1. GNZCQ360 vacuum deaerator

The GNZCQ360 drilling fluid vacuum degasser is generally used as a supporting oil drilling solids control equipment. It is installed after the drilling fluid shaker. It is mainly used to remove harmful gases in the drilling mud after the shaker screen, protect the mud proportion, and improve Mud performance, and can effectively protect the mud pump and sand pump, and improve the treatment effect of the solids control equipment. The GNZCQ360 vacuum deaerator adopts an autonomous slurry suction method, sucking the mud into the tank through the negative pressure in the tank, no need to use a slurry pump, and can act as a stirrer during the operation to prevent the mud from settling. The GNZCQ360 vacuum deaerator has a maximum processing capacity of 360m³/h and is matched with a 37KW explosion-proof motor, which can meet the explosion-proof requirements of oil drilling sites.

2. GN Solids Control GNSB centrifugal pump

GN Solids Control GNSB series centrifugal pumps are mainly used for supporting oil drilling solids control equipment to transport drilling fluid and mud. At the same time, it can also be used for slurry pumps for GN centrifuges, desilters, desanders and other equipment. All series of GNSB sand pumps of GN adopt mechanical seals, which effectively provide the service life of the equipment, and the performance is more stable, and the failure rate of the equipment is reduced, thereby effectively improving the production efficiency of the drilling site. The processing capacity of GNSB series sand pumps from GNSB ranges from 35m³/h to 320m³/h for customers to choose according to actual conditions to meet the actual needs of most customers. In addition, the parts of GNSB series sand pumps can be interchanged with some well-known international brand sand pumps, which greatly facilitates the convenience of customers to purchase and replace accessories. If you have requirements and questions about solids control equipment, you can contact us at any time.

The mud cleaner is a combination of desander, desilter and shale shaker. The overall structure is very compact and the design is reasonable, which greatly saves on-site space. It is mainly used for the treatment of harmful solids in drilling mud.

Customers can choose according to their actual needs. There are several models: GNZJ703F-D1S8NF, GNZJ703F-S2S12NF, GNZJ594F-S2S12NF, GNZJ703F-S3S16NF, GNZJ594F-S3S16NF. The processing capacity is 120 cubic meters per hour, 240 cubic meters per hour, and 360 cubic meters per hour.

Customers can match different numbers of cyclones according to different processing volumes. GN cyclones are selected from some special materials, polyurethane materials. This material has greatly improved wear resistance and corrosion resistance, and it extends the service life. , And the processing of materials can meet the needs of customers. The de-sanding cyclone is used to process particles between 40-60 μm, and the de-sludge cyclone is used to process particles between 20-40 μm.

• 

The whole cleaner can be disassembled and assembled into vibrating screen, de-sander and desilter according to working conditions. Our vibrating screen can adjust the angle under non-stop working conditions, and the whole screen box can be raised and lowered synchronously.

The screen box has good sealing performance and has been patented. Moreover, it is easy to replace, which greatly saves customers’ economic costs. The whole screen box is welded with stainless steel material, which is corrosion-resistant and high-temperature resistant, especially in the harsh working condition site, it is firm and not easy to be damaged. The vibrating screen box has been heat-treated as a whole, which can meet the requirements of continuous work under high excitation intensity.

Compared with traditional screens, our matched composite frame screens have better dialysis rate, more accurate screening data, greatly increased service life, and greatly increased screening area, which is easy to replace.

The matching motor adopts internationally well-known brands, such as Martin or OLI motors, which are used in conjunction with our products, and the quality is guaranteed. GN Solids Control wholeheartedly provides the best quality products and services to new and old customers.

GN Solids Control has been committed to a complete set of solid-liquid separation equipment systems and services for many years. After the Chinese New Year, GN Solids Control completed the manufacture of an engineering mud treatment system for an international engineering company.

The main processing equipment of this mud processing system includes:

1. Primary shale shaker

The GN Solids Control coarse Shaker is mainly used to remove boulders and aggregates. There is a conveying tank under the coarse vibrating screen to store the mud after the coarse screen. The mud is injected into the secondary fine screen vibrating screen by the submerged slurry pump.

2. Secondary shaker screen

The fine screen shaker of GN Solids Control is a double-deck vibrating screen used to remove most of the fine solid phase.

3. Three-stage screening mud cleaner

The mud after the secondary screening needs to be further screened with a mud cleaner to reach the centrifuge separation processing conditions. The mud cleaner produced by GN Solids Control uses a polyurethane material cyclone to extend its service life. The detachable cyclone bracket is convenient for customers to modify into a single vibrating screen, desander or desilter. The machinist’s screen box synchronous lifting device can meet the needs of screen box angle adjustment under non-stop working conditions.

4. Four-stage separation decanter centrifuge

The GN Solids Control decanter centrifuge is a finer solid-liquid separation device that can separate solid particles larger than 2-5 microns. In addition, it can be used in conjunction with chemical dosing devices to separate solid particles smaller than 2 microns. The flocculant and the slurry are transported to the decanter centrifuge for treatment by the screw pump.

GN Solids Control can also provide other auxiliary equipment, including mud agitators, walkways, ladders, guardrails, etc.

Recently, the GNLW-363ET-VFD sludge dewatering centrifuge independently developed and manufactured by GN Solids Control has been successfully sold to the sewage treatment plant in Southeast Asia for sludge dewatering at the back end of sewage treatment. GN customized this set of GNLW-363ET-VFD sludge dewatering centrifuge for customers based on years of experience in the research and development and manufacturing of centrifuge industry, and after in-depth communication with customers to understand the actual needs of customers’ sewage treatment plants. Southeast Asian customers are very interested in GN Solids Control. The sludge dewatering centrifuge solution provided is affirmed and we look forward to the next cooperation.

GNLW-363ET-VFD sludge dewatering centrifuge is a T series dewatering and concentrating decanter centrifuge independently developed by GN Solids Control. The half cone angle is 8.5 degrees. It is mainly used to separate liquid in solid particles and is suitable for comparing dryness Materials with high clarification requirements are separated and dehydrated. If centrifugal dehydration of fine-particle sludge wastewater is required, our company can also match the flocculation dosing system used with the sludge dewatering centrifuge for the customer to achieve the ultimate goal of the customer Separate processing requirements.

The diameter of the rotating drum of the GNLW-363ET-VFD sludge dewatering centrifuge is 360mm, the length of the rotating drum reaches 1512mm, the maximum speed of the centrifuge is 3900RTM, and the maximum separation factor can reach 3063G. The GN Solids Control sludge dewatering centrifuge electric control system is equipped with a stainless steel frequency conversion control cabinet, and the control system is integrated into the PLC. The frequency conversion control cabinet controls and displays the speed and differential speed, and can also monitor the operating status of the equipment, and can also Customers need to equip customers with automatic flushing and automatic dosing systems. If you have sludge dewatering needs or are interested in solid-liquid separation, please feel free to contact us.

Recently, GN Solids Control successfully customized a mud cleaner and a GN drilling fluid centrifuge for a foreign drilling company according to the customer’s on-site operation requirements, and successfully applied it to the customer’s drilling site, which was recognized by the customer. GN Solids Control is a solids control equipment manufacturer with rich experience in solid-liquid separation in petroleum drilling.

1. Mud cleaner

The GN Solids Control mud cleaner integrates three solids control equipment desander, desilter and vibrating screen into one processing module. The structure is compact, which can effectively reduce the equipment footprint, and the processing capacity can meet from 120-360 Cubic meters per hour. The desilter and desander are matched with 4-inch and 10-inch polyurethane cyclones respectively, which can effectively extend the operating life. In order to ensure the stability of the vibrating screen, the vibrating motors of GN Solids Control shale shaker all adopt international brands Martin or Oli. In addition, this set of mud cleaning is also equipped with a special jet mixing device and a slurry tank for customers according to customer requirements to meet the actual needs of customers on site operations.

1. Drilling fluid centrifuge

The drilling fluid centrifuge is mainly used to process the small solid phase in the oil drilling fluid. According to different customer needs, GN Solids Control can also provide customers with a medium-speed centrifuge to remove the solid phase of 5-7μm. If you need to remove the fine solid phase of 2-5μm in the drilling fluid, you can choose the GN high-speed centrifuge, and our company also It can provide customers with a flocculation dosing system for supporting centrifuges, and can integrate all operating systems into the PLC, improve equipment automation and reduce human intervention, improve production efficiency and reduce labor costs. GN Solids Control focuses on the manufacture of solid-liquid separation equipment. If you have any requirements for solid-liquid separation equipment, you can contact us at any time.

Recently, a set of Shale Shaker separation system produced by GN Solids Control was sold to a foreign environmental protection company.

As a separation equipment, shale shaker is widely used in various industrial production. It plays an important role as the primary equipment in the mud solids control system. This system adds new technology on the basis of the traditional vibrating screen, adding a clean water pipeline above the screen frame. When the shale shaker is working, the clean water pipeline can spray clean water onto the shale shaker screen. The addition of this technology improves the screening effect for some substances with higher viscosity and difficult to screen. The shale shaker separate system consists of a screen, a vibrating screen slurry pump, a clean water pipeline pump and a treatment tank. The system is completely independently developed and manufactured by GN Solids Control, which also reflects the advantages of GN Solids Control in system development and manufacturing. With more than ten years of development, the company has accumulated a lot of experience in the development and manufacturing of complete systems.

GN Solids Control is a manufacturing enterprise specializing in the production of solids control equipment. The shaker screen, the core equipment of the system, has long been the core product of GN Solids Control. The shale shaker produced by GN Solids Control has the following advantages and characteristics:

The vibration motor of GN Solids Control brand shale shaker adopts the Italian OLI or the American Martin brand, and its supporting GN brand explosion-proof electric control box, and the electrical components adopt Siemens or Schneider brand.

The vibrating screen box adopts heavy load design, and the overall heat treatment of the screen box, its vibration intensity can reach 8G.

A unique sealing design is adopted between the screen box and the screen of the shale shaker, which can not only protect the screen box, but also prevent fine materials from passing through the installation gap of the screen.

The bottom frame of the shale shaker box is designed with stainless steel, which has strong corrosion resistance.

The shale shaker box can ensure the angle adjustment without stopping the machine, and the operation is stable at the same time.

The successful delivery of this shale shaker system has set a good start for GN Solids Control‘s work in 2021. In the days to come, we will work hard to make high-quality products and serve every customer well.

Recently, a mud recovery system produced by GN Solids Control will soon be sent to a domestic engineering company. This is also a continuous order based on the customer’s long-standing trust in GN Solids Control. The sincere and tacit cooperation between the two parties will undoubtedly contribute to the booming domestic management. Net construction is the icing on the cake.

GN Solids Control has been committed to providing customers with professional mud treatment solutions and reliable solids control equipment. The project is also fully conducting technical exchanges with customers and combining the customer’s on-site use requirements to customize a mud recovery system. The system includes a 240 m3 and a 120 m3 economical mud recovery equipment, a set of mixing tanks, and two sets of storage. Mud tank, and a GNLW554E-VFD mud dewatering decanter centrifuge, this system can fully meet the requirements of mud mixing, processing and recycling of medium and large directional crossing construction.

After several years of research and development and testing, GN Solids Control has successfully developed a set of mud treatment solutions containing tailing slurry dewatering. This system first filters and shaker screens the large particles in the mud with the mud recovery equipment to reduce the solid content in the mud. For the small particles in the mud, the small particles are flocculated by adding flocculating agents, and then enter GN Solids Control’s own decanter centrifuge performs mud dewatering. After the solid-liquid separation treatment of the decanter centrifuge, the liquid phase part can be directly discharged into the sewage pipeline, and the solid phase part can be directly loaded and transported away. This greatly reduces the cost of tail slurry treatment for customers and also meets the national environmental protection requirements. After more than ten years of continuous development, GN Solids Control has been committed to the research and development and manufacturing of mud solids control equipment, and has accumulated a lot of experience in mud treatment. The company not only has a high market share in the domestic market, but also in the international market. More than 70 countries and regions in the world have established cooperation. Set up branches in the United States and Russia to better serve global customers. The long-term trust of customers is our driving force for continuous progress.

Recently, the drilling mud mixing tank manufactured by GN Solids Control has been successfully applied to the customer’s work site. The mixing tank manufactured by our company this time is a customized product according to customer requirements. Integrating two sets of mixing tanks and one set of jet mixing hopper into a skid-mounted structure, it not only meets the customer’s requirements for floor space, but also meets the road transportation requirements, and meets the frequent needs of customers for conversion work sites. According to the demand, the customer spoke highly of the mixing tank designed and manufactured by our company, which effectively solved the customer’s problem.

The jet mixing device provided by GN Solids Control for customers is mainly used to configure drilling mud and change the density, viscosity, acidity and alkalinity of drilling mud. When using, it only needs to transport drilling materials such as barite powder and related chemicals into the jet mixing funnel, and then enter the mixing tank after mixing through the jet mixing funnel. The jet mixing device provided by our company for customers By increasing the shearing force of the drilling mud in the pipeline, the dispersion effect of various materials in the drilling mud can be effectively improved, so that the various components in the mud can be fully circulated and mixed in the tank to ensure the performance of the drilling mud and improve the drilling efficiency and Safety. In addition to the high-performance jet mixing device, our company has also equipped customers with a explosion proof electric control system independently produced by GN Solids Control. The box body is made of aluminum alloy and all electrical components are made of ABB, Siemens, Schneider and other international The well-known brand effectively guarantees the safety and stability of the electronic control system. If you are interested in the jet mixing device produced by our company, please feel free to contact our company.

If you want to know more about GN Solids Control, we sincerely welcome you to inquire or visit our company.

A few days ago, the GNLW-454ET decanter centrifuge independently designed and manufactured by GN Solids Control was successfully sent to an environmental protection company in Tianjin, China, for sludge dewatering in a sewage treatment plant. GNLW-454ET centrifuge belongs to GN T series centrifuge. The half cone angle of T series centrifuge is 11°. It is suitable for removing liquid in solid phase materials, suitable for easy separation of large particles, large solid-liquid density difference, and low viscosity. , High concentration, solid-liquid separation for materials with large processing capacity and higher dryness than clarity requirements. The T series centrifuge selected by our company this time is finalized after laboratory analysis based on the characteristics of the customer’s materials and the materials provided by the customer, and we provide customers with a slurry supply pump and flocculation dosing system that match the GNLW-454ET centrifuge. , Customized a complete set of centrifugal dewatering system for customers to fully meet customers’ separation processing requirements and processing capacity, and may be highly praised by customers, fully affirming GN’s high-standard service and high-quality equipment.

The main parts of the GNLW-454ET centrifuge are made of phase stainless steel SUS2205 by centrifugal casting, which avoids the problems of intergranular corrosion and incomplete residual stress release caused by traditional welding methods, regardless of material and process The above are far superior to other competing products in the same industry. The centrifuge electric control system adopts PLC touch panel control, the sensor can be installed on the centrifuge to monitor the running status of the centrifuge and feedback to the control panel and automatically adjust the slurry supply of the slurry pump, saving labor costs and improving safety . GN Solids Control has always been adhering to win the trust of customers with high-quality products, high-standard services, and innovative technological innovations. If you have a demand or interest in the GN Solids Control centrifuge, you can call us directly.

If you want to know more about GN Solids Control, we sincerely welcome you to inquire or visit our company.