Month: September 2023

Recently, GN Solids Control solid vacuum pump and vacuum degasser passed the factory’s strict inspection and were sold to Chinese drilling companies. The specific models of these equipment are vacuum pump GNSP-40B and degasser GNZS270B. The solid vacuum pump is used as a mud transfer equipment. The vacuum degasser is used as the secondary stage of mud control to remove hydrogen sulfide from the mud. The following is mainly about the advantages of GN Solids Control vacuum degasser.

GNZCQ series drilling fluid vacuum degasser is usually installed after the shaker, which can effectively separate harmful gases existing in the drilling mud, maintain the mud specific gravity, and protect the sand pump and mud pump to improve the processing effect of subsequent equipment. The GNZCQ series vacuum Degasser adopts self-priming mud suction method without additional mud feed pump. The GNZCQ series vacuum Degasser can also play the role of a large mixer to prevent the drilling mud from sedimentation.

 

GN Solids Control vacuum degasser also has the following characteristics:

1. The vacuum pump sucks the mud into the vacuum tank and uses it to suck the gas out of the vacuum tank. The vacuum pump plays two different roles here. 2. The water ring vacuum pump always operates in isothermal state, suitable for flammable and explosive gas suction, with reliable safety performance. 3. The mud is injected through the rotor window at high speed to break the bubbles in the mud completely, resulting in good degassing effect. 4. The main motor is offset, the machine center of gravity is reduced. 5. Belt drive is adopted to avoid the complication of the gearbox. 6. The application of air-water separator does not cause water and gas to be discharged simultaneously, keeping the exhaust pipe unobstructed. In addition, water can be recycled to the vacuum pump to save water. 7. The suction pipe is inserted into the mud tank, and when the mud is free of gas invasion, it can be used as a high-power mixer.

GN Solids Control‘s vacuum degasser also has the following characteristics:

1. The vacuum pump sucks the mud into the vacuum tank and uses it to suck the gas out of the vacuum tank. The vacuum pump plays two different roles here. 2. The vacuum pump always operates in isothermal state, suitable for flammable and explosive gas suction, with reliable safety performance. 3. The mud is injected through the rotor window at high speed to break the bubbles in the mud completely, resulting in good degassing effect. 4. The main motor is offset, the machine center of gravity is reduced. 5. Belt drive is adopted to avoid the complication of the gearbox. 6. The application of air-water separator does not cause water and gas to be discharged simultaneously, keeping the exhaust pipe unobstructed. In addition, water can be recycled to the vacuum pump to save water. 7. The suction pipe is inserted into the mud tank, and when the mud is free of gas invasion, it can be used as a high-power mixer.

In addition to the equipment described above, GN Solids Control also produces a complete set of oil drilling mud control systems, trenchless and coal bed methane drilling mud recovery systems, pile driving and shield tunneling mud purification systems, drilling waste treatment systems, industrial environmental mining and other solid-liquid separation systems.

GN Solids Control is a professional mud processing equipment manufacturer. It has been committed to providing customers with high-quality mud purification solutions for many years. Recently, our company has successfully customized a set of GNMS-1000D mud mud treatment equipment for the top pipe customers in Singapore. And customized a set of GNMS-500D mud purification device for South Africa’s level orientation.

1. GNMS-1000D mud system

The GNMS-1000D mud system belongs to the GN Solids Control independently developed and produced mud treatment system. It is mainly used in mud purification and recycling in non-excavation industries. It is not equipped with slurry and mixed mud. The demand for mixed mud needs to be equipped with mud jars and shooting slurry devices alone. The GNMS-1000D mud processing system has a processing amount of 240m³/h. This system is equipped with a GNZY705E-Y2S mud purification all-in-one. The sand removal uses 2 10-inch desander, which can effectively extend the service life. The system paste pump uses a 45kW GN Solids Control Centrifugal Pump GNSB6X5C-13J.

 

2. GNMS-500D mud purification system

The GNMS-500D mud purification system also belongs to the GN D series economy mud treatment system. It does not have the function of mixed mud and storage mud, and the relatively small processing volume is 120m³/h. The machine uses a 10-inch polyurethane rotor, and the slurry pump uses a 30kW GNSB5X4C-13J Centrifugal Pump.

In addition to the D series economy mud treatment system, GN Solids Control can also provide customers with B series high -style mud purification systems. The B series high -profile mud purification system integrates mud purification and recycling, storage and mud mixing functions, and mud mixing functions. It can increase multi -level purification treatment equipment to meet the needs of high -end and medium and large rigs. If you have relevant needs, please contact us.

Last week, GN Solids Control provided a complete mud purification equipment for a New Zealand customer for vacuum excavation mud purification treatment.

The equipment mainly includes mine screen separation device, high-frequency fine vibration screen, desilter , decanter centrifuge, among which:

1. Mining vibration screen

This device is a vibration screen, which mainly separates the large diameter solid particles and has a large processing amount. Because the large diameter solid particles are more wear out of the sieve network, the flexible polyurethane sieve net is used. The sieve of this material has high wear resistance, which improves the continuous operation capacity and work efficiency of the equipment, thereby increasing economic benefits Essence

 

2. Shale shaker

This device is a fine separation unit, which mainly separates solid particles above 100um. The processing volume is less than the mine equipment, but the screening effect is more. The imported vibration motor is used like a mine sieve to ensure the service life. After the overall heat treatment of the sieve box, the torment strength can reach 8.0g. The bottom frame is made of stainless steel, which is strongly corrosive. It can meet the angle of non -stop operation to adjust the angle of the sieve box, and the operation is more stable.

3. Desilter device

The liquid phase after high-frequency fine screen treatment enters the desilter again, and the solid particles larger than 20-40um can be removed by the desilter. The cyclone of the desilter is made of polyurethane material, which has higher wear resistance.

4. Decanter centrifuge

GN Solids Control centrifuge can separate solid particles larger than 2-5 µm. The centrifugal separators are necessary because the slurry after desliming treatment does not meet the criteria for recycling. Centrifugal separators reduce the specific gravity of the slurry to allow for reuse. The decanter centrifugal are fabricated with bi-directional stainless steel centrifugal casting, which is superior to 304 and 316 materials. The wear-resistant head of the waste discharge port uses a special tungsten carbide hard alloy bushing, which provides excellent wear resistance. The separators are dynamically balanced three times – at medium speed, high speed, and overall – to ensure stable operation under high-speed conditions. Producing products of inferior quality is equivalent to creating waste. GN Solids Control has always adhered to the principles of safety first and top quality, which has allowed it to develop rapidly within the industry.

If you have any solid-liquid separation equipment needs, please contact GN Solids Control.