Month: May 2023

With the improvement of environmental protection, most petroleum companies also require further treatment of mud to obtain clean oil, water and solid wastes, thereby improving the protection of the environment.

Recently, GN Solids Control provides US environmental protection companies with a 1 m3/h processing of mud processing system, providing the 15 m3/h sludge processing system for the Qatar service company, and providing a 5 m3/h oil mud treatment system for the Kuwait drilling service company.

 

In the oil -containing sludge treatment scheme provided by GN Solids Control for foreign customers, the main equipment is the snail centrifugal machine and spiral conveyor.

Decanter centrifuge

The GN decanter centrifuge is mainly used to separate solid particles with more than 2-5um. GN SOLIDS Control has a decanter centrifugal design with different bowl diameter, including 14-inch, 18-inch, 22-inch, and 30 inches. machine.

Screw conveyor

Screw conveyors are widely used in the transportation of solid -phase waste in drilling waste. The screw conveyors that provide customers this time are mainly used to transport solid -phase waste separated from centrifuge. The spiral blades of the GN Solids Control spiral conveyor are used for wear -resistant materials, which improves the service life of the product. The upper cover is protected by removable seals or steel grid plates to improve the safety of use.

GN Solids Control not only provides core devices, but also has better set processing system design and production capabilities, such as mud circulation system, mud without landing solutions. If you have this need, welcome contact GN Solids Control.

Last week, the oil -based mud diamond dumpling machine produced by GN Solids Control was sold to a mud company abroad. The following specifically introduced:

1. GN solids Control Drilling cutting drying machine

Drilling cutting dryer by GN Solids Control is mainly used to treat oil -based rock chips and synthetic base rock chips. After the drilling rock scrap dried machine is treated, the oil content on the rock chips can be controlled below 5%. The model of this supply is GNCD930G, which is designed for integrated module, including containers, screw conveyors, centrifugal pumps, hanging ups and hanging devices.

Core equipment drilling vertical cutting dryer machines mainly include sieve baskets and rotors. These two main components run in the same part at different speeds. Solid particles that are more than 250 microns can be separated from rock chips. The rock crumbs produced by GN Solids Control have different sized sieve baskets of 3, including 250 microns, 350 microns and 500 microns. There is a difference between the speed between the rotor scraper and the sieve basket. The remaining solids that remain on the inside of the screen basket are continuously scraped off by the scraper and transported to the bottom of the sieve basket. The scum discharge port is collected and the discharge machine is extended to achieve the drying of drilling.

 

GN Solids Control has provided hundreds of drill chip drilling machines for global companies such as Baker and Shell.

GN Decanter Centrifuge

Decanter centrifugal machine is one of the key equipment for drilling mud solid -phase control and drilling waste treatment. There are many rotating sizes produced by GN Solids Control to choose from, including 9 -inch, 14 -inch, 18 -inch, 22 -inch, and 30 inches. The drum material is made of two -way stainless steel SS2205 or SS32304. It has better performance. The abrasion -resistant cover of the residue port is a tungsten carbide hard alloy cover, which is extremely abrasion -resistant and is not easy. At the same time, the feeding device is protected by replaceable wear -resistant alloy tablets, with long service life and easy maintenance.

GN Solids Control is a 14-inch horizontal centrifugal machine, model GNLW363D-VFD, the same integrated design, including containers, liquid pumps, and spiral conveyors.

The integrated design of the two modules can meet fast installation and transportation, and can also meet the use of low -temperature areas in winter.

If you have equipment requirements or solution consultation in this area, welcome to call GN Solids Control