Month: March 2023

GN Solids Control is a professional drilling mud treatment equipment manufacturer. The crown can have two series of mud processing systems. The D series is a economy mud treatment system. The B series is a high -profile mud treatment system. The D series products are mainly used for the purification and recycling of mud. It does not have the function of storing mud and mixed mud. It requires additional configuration of slurry tanks and mixture equipment. B series products integrate mud purification and recycling, mud storage, and mud mixing functions, and are divided into multi -level purification treatment, which can meet the needs of high -end and large and medium -sized rigs. This article mainly introduces high -profile mud treatment systems. The main characteristics are as follows:

 

The standardized and styling design of many years of experience is comprehensive. The product has strong applicability, reasonable structure, and stable operation. Multifunctional integrated design can meet the functions of mud cleaning, mixed mud, storage, etc. Self -cleaning design, reducing the tank cleaning work, compact structure and strong separation ability. All the electrical control systems use explosion -proof, dustproof, and waterproof crown energy control boxes, and use Siemens or Schneid Electric Electric Components. The guardrail adopts a foldable design to facilitate disassembly transportation.

With a straight line shale shaker, the shale shaker can reach 7.5g, which can be adjusted. The bottom frame of the stainless steel sieve box, combined with a compressed sieve box seal protection, has a long service life. The vibration motor uses an international brand OLI or Martin, USA. The vibration spring is a rubber -wrapped type, extending the service life and reducing noise. Wedding sieve network installation to meet the requirements of fast disassembly.

The all -in -one machine uses a stuck polyurethane rotor, which has a long service life and easy to repair. 10-inch sandwiches, separation particle size 40-60um, 4 inches to remove mud rotor, separate particle size 20-40um, to meet the requirements of duplicate mud.

The centrifugal pumps in the remaining supporting devices are all mechanically sealed and have a long service life. The mixer adopts a direct Flat -connected formula, the FAG brand deceleration machine bearing, the structure is compact and runs stable. The mud gun nozzle and the firing dragon nozzle are made of wear -resistant polyurethane material. The paint adopts the Japanese brand epoxy zinc -rich ocean heavy anticorrosive paint.

The GN high -profile mud recovery system can be designed to be designed as a pilomy type, hydraulic lifting type, and a fast movement requirements for car to meet different operating conditions. GN Solids Control is the first domestic solid control equipment manufacturing company to launch a hydraulic lifting mud recovery system, which is exported to Australia, the Middle East, Russia and other regions.

If you have the needs or problems of mud purification system, you need to consult, welcome to contact GN solids Control

This week, Gn Solids Control has completed the production and manufacturing of two sets of solid vacuum pumps. The GN SOLIDS Control vacuum pump is a purely aerodynamic conveyor pump. The two sets of vacuum pump models provided for African customers this time are GNSP-10B and GNSP-40B.

As we all know, the waste at the oil drilling site is usually high and has a certain viscosity. For example, the drilling cuttings discharged from  shale shaker are difficult to transport the general transport pump, but the solid particles only need to be less than 75 mm and have a certain liquidity. GN The Solids Control vacuum pump can complete the transportation task, and the transport distance can reach up to 1,000 meters.

 

Among the two vacuum pumps provided by African customers, the vacuum pump of the model GNSP-40B is used for the conveying of on-site drilling waste, which avoids the drop of waste caused by using other devices such as excavators and other wastes to protect the on-site environment. At the same time, hazardous disclosure may occur at the time of drilling. It needs to be cleaned in time. The routine manual cleanup speed is slow, and the on -site operation is delayed. However, using the model GNSP-10B vacuum pump with GN unique pulp, it can be used as an industrial vacuum cleaner to quickly clean up the scene. This vacuum pump is equipped with wheels underneath.

The GN SOLIDS Control vacuum pump can also be used for the cleaning of mud tanks. During the drilling process, the type of mud is needed to clean the mud can. The waste mud after washing the tank can use the vacuum pump for suction and clean up to improve efficiency. When the sludge pit is processed, the conventional transportation equipment is difficult to transport the sludge. It can be transported by the crown can be used to solve the incurable diseases.

The conventional vacuum pump is made of carbon steel. If you encounter special materials, GN Solids Control can also provide a vacuum pump for stainless steel.

GN Solids Control has delivered multiple sets of solid vacuum pumps for domestic and foreign customers for many years, and has obtained high -quality feedback from customers. If you are about equipment requirements or plan consultation on this area, you are welcome to call GN solid control.

Last week, GN Solids Control provided three large oil drill solid control equipment for South American customers, mainly including:

1. Drilling liquid shale shaker

GN Solids Control Drilling liquid vibration screening uses Italian OLI or Martin Motor, and electrical components use Siemens Schneider brand. The negative load design, the overall heat treatment of the sieve box, the vibration strength can reach 8.0g, which can meet the use of various working conditions. It is mainly used for solid particles with a first -level screening and is separated from 100um. The vibration screen model is GNZS594J.

2. Mud Cleaners

GN Solids Control Mud cleaners are a tight processing device. It is equipped with a sand removal and mud device on the vibration screen to form a compact integrated module, saving a lot of space for transportation. The mud cleaning device provided to customers is equipped with a 10-inch sand removal and a 4-inch mud removal flow. The sand removal can be separated from 40-60um solid particles. The above solid particles. The supply model is GNZJ594J-3S16N.

 

3, centrifugal pump

GN Solids Control Sand Pump is mainly used to transport drilling mud, which can be used as a slurry pump for sand removal, mud device, and centrifuge. Pump is used. This sand pump is used as a solution pump for mud device and sand removal.

4. Decanter centrifuge

Drilling solution is widely used in the proportion control of drilling fluids and heavy crystal recycling. The price of drilling fluid is very expensive. Because it usually needs to add chemicals, it can be re -used after it has a certain proportion and viscosity. Therefore, it is important to recover more drilling fluids. GN Solids Control Drilling solution The centrifuge of the drilling solution is processed under high speed and high gravity, and the drilling solution is separated to recover more drilling fluids.

5. Screw paste pump

GN Solids Control In the selection of the slurry pump of the horizontal snail centrifuge, the screw pump is generally selected. Because the screw pump can control the flow of liquid supply and can record the amount of liquid supply. The supply screw pump model is GNG30-075C and the processing capacity is 0-30m³/h. It can be adjusted according to customer needs. At the same time, Guan can also provide other models of screw pumps for customers to choose.

GN Solids Control has been committed to providing customers with cost -effective solutions. If you have any needs, you can contact us at any time.

GN Solids Control is a professional solid control equipment manufacturer. After more than 10 years of continuous research and development and innovation, GN Solids Control has established overseas branches in the United States and Russia. The GN Solids Control device has now been exported to many countries and regions around the world, and has been accepted and recognized by hundreds of companies around the world.

This week, GN Solids Control provided a batch of mud device, sand removal and vacuum air device for a well -known Chinese entering company. Its main model and parameters are as follows:

1. GNZJ752J-1S

 

The GN Solids Control GNZJ752J-1S sand removal has a small structure and affordable characteristics. It uses GNZJ752J mini-type bottom flow sieve with a screen area of 1.4 square meters and 1 “sand removal device. It can separate solid particles with more than 60um. It is mainly used in small oil drilling machines, coalbed methane drilling, horizontal directional rig and wells.

2. Muddy removal GNZJ752J-8N

Like the GN Solids Control sand removal, the GNZJ752J mini-type bottom flow is also used, but it is equipped with hydro cyclone, which can separate solid particles above 20-40um. The field is basically the same. As a purification equipment at the back end of the sand removal, the purification effect of mud is guaranteed.

3. Vaccum Degasser Gnzs270B

GN Solids Control Vacuum Vacuum removal is usually installed after the vibration sieve, which can effectively separate the harmful gases in drilling mud, maintain the proportion of mud, and protect the sand pump and mud pump to improve the effect of the subsequent equipment. The GN Solids Control Vacuum removal is used by autonomous pulp, and there is no need to be equipped with a paste pump. At the same time, GN Solids Control can also provide centrifugal gasifiers, which is small compared to vacuum aircraft and occupy small space.

GN Solids Control can be equipped with a complete set of solid control equipment, including shale shaker, sand removal, mud device, centrifugal pump, vacuum removal, centrifugal machine, mud jar, etc. If you have solid control requirements or solution design, You are welcome to call GN Solids Control.

GN solid control company is a professional solid -liquid separation equipment manufacturer. In the oil solid control industry, it can be equipped with a complete set of solid control treatment equipment according to customer needs. In the HDD industry, GN solid control can provide standard mud purification equipment, such as GNMS-200D, GNMS-500D, GNMS-1000D, can also customize exclusive mud purification devices according to the different needs of customers. Last week, GN Control provided four sets of mud purification devices for a Australian customers, mainly as follows:

 

GNMS-200D mud purification device

The shale shaker processing volume is 200GPM, and the separation particle size is 25um. Select 4 4 -inch cyclone, use 100%high -quality polyurethane, and long service life. The bottom flow screen is GNZS753 double -layer shale shaker, with an upper screen area of 0.875㎡, and the underlying screen area is 1.35㎡. the vibration motor uses an international brand Italian OLI or Martin. The bottom frame of the sieve box is made of stainless steel, and the vibration strength is ≤7.1g, which can be adjusted. In addition to the mud supply centrifugal pump model GNSB4X3C-11J, it uses mechanical sealing and has a long service life for easy maintenance. It can swap accessories with the international standard pump. There is a mud recovery tank at the bottom. The overall design is small, covering a small area, the transportation size is 3135mm*1920mm*2521mm, and the total weight of the system is 3012kg, which is convenient for transportation. The electrical control cabinet uses the GN brand to prevent explosion -proof rain and dust. Electric components use Siemens or Schneid components. Safety standards for the aisle guardrails and electrical equipment meet Australian requirements.

If you have problems or needs for mud purification devices, welcome contact GN solids control.