Month: December 2022

Last week, GN Solids Control provided four 9 -inch snail centrifugal machines for a well -known European drilling company. This batch of centrifugal machines was preserved and delivered to customers on time. For decades, GN Solids Control has focused on the research and development and production of solid -liquid separation equipment. We have professional engineers and rich on -site experience. The combination of theory and practice has ensured that the technical advanced technology and high degree of fit on the spot. GN SOLIDS Control produces hundreds of centrifugal machines each year, of which 9 -inch horizontal snail centrifugal machines are one of the best -selling models. Most of these centrifuge machines are used for mining core drilling industries, and some are used for small laboratories for testing and testing.

GN Solids Control 9 -inch horizontal decanter centrifuge can also be called miniature centrifuge, because it is the smallest centrifugal machine we produce. Its drum is made of double -phase stainless steel centrifugal, and the performance is better; the spiral pusher is protected by a replaceable wear -resistant alloy tablet, with a long service life and easy to repair and replaced. In the case of adjustment of the dry and humidity of the material; three dynamic balance treatment before the centrifugal machine is out of the factory to ensure that the centrifuge operates stably under medium -speed and high -speed operating conditions.

 

According to the needs of customers, the centrifugal machines provided by the GN Solids Control have a base and bracket, so that the centrifuge can have a certain height from the ground, and the liquid can be easily stored in the mud can at the bottom.

These four focus are fixed -driven centrifugal machines, and drilling companies provide diesel generators for power supply. All systems are designed and manufactured in a compact way, reducing the area of the equipment itself, while facilitating customers to move.

In addition to the production of 9 -inch centrifugal machines, GN solid control also produces 14 -inch, 18 -inch, 22 -inch, and 30 -inch single -rolled snail centrifuge. These different drum diameter centrifugal machines will be used with shale shaker, vertical cutting dryer, centrifugal pumps and other equipment for different industries.

If you have the needs of solid -liquid separation equipment such as centrifuge, you are welcome to call the crown can be solid control.

This week, GN Solids Control provided a batch of horizontal snail centrifugal machines and mud stirrers for well -known domestic marine drilling companies. These horizontal decanter centrifugal machines and mixers are designed to meet the marine drilling environment, with special lifting devices and marine explosion -proof and marine protection levels.

1. GN Decanter Centrifuge

Through the solid granules that can be separated from 2-5 microns through the horizontal decanter centrifuge, as this size solids is hardly be separated by shale shaker, compared to other solid fluid separation equipment, the horizontal snail centrifuge can be separated from small solid particles, thereby reducing the proportion of mud and restoring mud performance. At the same time, GN Solids Control can also provide other centrifugal populations, including 9 -inch, 14 -inch, 18 -inch, 22 -inch, and 30 inches to meet different operating conditions and processing requirements. The horizontal snail centrifugal machine that provides the marine drilling platform is 18 inches, and the processing volume is 60m³/h. Dual variable frequency control is controlled to meet the use of maritime drilling platforms. The turning drum of the GN reclining snail centrifuge is made of double -phase stainless steel centrifugal. The solid emissions port is protected by carbonized hard alloy suits. Film protection, long service life, and easy maintenance. For the drilling site, the continuous operation capabilities of the equipment will bring continuous benefits to customers and reduce losses caused by on -site stop work due to equipment failure.

2. GN mud agitator

The GN mud agitator is one of the important equipment for drilling liquid tank -type solid control systems. It is mainly used for mixing the drilling fluid to prevent the solid granules deposited in the tank circulation system, so that the performance of the circulating drilling solution is stable and mixed evenly. The GN mud mixer uses a diagonal gear reducer, the structure is compact, the meshing performance is good, and the work is reliable. The oblique gear decelerator runs smoothly and the noise is small; the tooth surface of the oblique gear decelerator is large, which reduces the load of each pair of gears and improves the carrying capacity of the gear; Instead of using the belt, the speed of stirring the impeller is constant; the stirring intensity is large, the range is wide, and the phenomenon of the current overloaded by the motor is avoided from the structural design. The motor is very convenient to place, install, adjust or replace.

GN Solids Control can not only provide a snail -snail centrifuge and mud mixer, but also provide drilling liquid vibration sieves, mud cleaners, vacuum gas device, centrifugal pump, mud jar and other solid control equipment. GN Solids Control can provide professional solutions and complete sets of drilling mud processing equipment.

GN Solids Control is a drilling solid control equipment manufacturer. After more than 10 years of continuous research and development and innovation, GN Solids Control has become a well -known brand in the domestic solid control equipment industry and overseas branches established in the United States and Russia.

If you have any needs for drilling mud treatment equipment, you are welcome to call to contact us.

     Last week, GN Solids Control provided three well -known drilling companies with three anti -splash drilling liquid shale shakers and a mud cleaner. Meet the requirements for environmental protection treatment of mud.

1. GN drilling liquid shale shaker

     GN shale shaker use OLI or Martin motor in Italy, and Electric components use Siemens Schneid. The negative load design, the overall heat treatment of the sieve box, the maximum vibration strength can reach 8.0g, which meets the use of various operating conditions. Shale shaker is mainly used for first -class separation, separated solid particles with more than 100um, and at the same time, the number of sieved particles can be adjusted by regulating the number of mesons of the shale shaker. The assignor allocates the mud to the two shale shakers at the same time to increase the processing amount. The shale shaker of this supply has an anti -splash design to effectively prevent the material splashing, reduce the waste of mud, and protect the on -site operating environment and meet the needs of the owner.

 

2. GN mud cleaners

     The GN mud cleaners is a tight processing device. It is equipped with a sand removal and mud device on the shale shaker to form a compact integrated module. Compared with the use of shale shakers, sand removal and mud device, it saves a lot Use space and facilitate transportation. The mud cleaning device provided to customers is equipped with a 10-inch sand removal and a 4-inch mud removal flow. The sand removal can be separated from 40-60um solid particles. The above solid particles provide guarantee for subsequent mud recovery or the use of centrifuge.

      GN Solids Control is a professional solid liquid separation processing equipment supplier. The main parts of its production such as shale shaker, mud cleaners, centrifugal pumps, and snail centrifugal machines are widely used in drilling solution treatment. GN Solids Control also provides other solid -liquid separation devices in addition to providing shale shakers and mud cleaners. If you have this need, you are welcome to contact GN Solids Control.