Month: October 2022

Last week, GN Solids Control provided a sludge pit to clean the vacuum pump and the residential snail centrifuge for a certain Asian customer for sludge dehydration treatment.

GN Solids Control Solid Vacuum Pump can transport materials with high transportation content and high density, such as pot mud, drilling rock crumbs, refinery waste, oil sludge treatment, etc. The valves, control boxes and other components of the GN mini solid vacuum pump are driven by pneumatic driving, which is safe and reliable in a non -explosion -proof environment. The vacuum pump provided to customers this time is used for the transportation of sludge in the sludge pit and replaced the excavators for conventional use. This can maintain the operating environment of the scene, reduce pollution, and improve efficiency.

 

The sludge drawn out by the GN vacuum pump is added with water and entered the rescuer of the Decanter Centrifuge for dehydration. It can get clean water and relatively dry sludge. This sludge can be directly treated in the next step. The horizontal screw pusher of the horizontal snail uses double -phase stainless steel 2205, which improves wear resistance and service life. The outlets are protected by carbonized wear -resistant alloy sets, and the continuous operation and use capabilities are stronger. GN Solids Control cooperates closely with world -renowned suppliers. For example, we use SKF brands in the main bearing, and we use Electric components to use Siemens, Schneider, ABB and other brands. Ensure the experience of the customer and meet the needs of customers.

If you are in the need for solid -liquid separation equipment or transportation equipment, please contact the GN Solids Control.

In the oil industry, soil pollution is mainly derived from three parts of the landing crude oil and oil -containing sludge, drilling waste mud, and waste residue generated by oil -containing sludge in oil and gas production and processing. A large amount of pollution soil is generated. The GN Solids Control Environmental R & D team adopts the treatment of soil thermal leaching+ centrifugal separation for different types of oil -containing soil. It has the characteristics of large processing volume and significant effects. While ensuring the treatment of the standard Treatment has greatly reduced the total amount of oil -containing and reduced the cost of completely harmless treatment.

Last week, GN Solids Control provided a set of oil -free soil -free scrubbing equipment for Middle East customers. The main configuration is as follows:

Mine shale shaker module

Because the materials that need to be processed may contain large sundries such as large rocks and plastic breaking plastic, first use the crown energy mining shale shaker for rough sieve, eliminating these foreign objects that may affect the crushing effect or cause the crusher failure.

 Soil leaching module

The materials after the mining shaker were transmitted to the crusher through the spiral conveyor, and the feed port or the outlet is equipped with a strong magnet in the spiral conveyor to remove the iron impurities and protect the crusher. The crusher crushes and screens the large particles in the oil -containing soil, so that the solid particles in the material are not greater than 70mm.

 

After the material is crushed, the material is provided to the premature jar through the vacuum pump.

The material of the vibration sieve is transmitted to the two -phase horizontal decanter centrifuge to separate the solid fluid through the screw pump. Separate, so as to obtain pure oil and water and store them in the oil compartment and waterfront, respectively.

Chemical medicine module

During the work of the entire system, in order to achieve a better separation effect, special chemical agents need to be added to premature tanks, vibration sieve tanks or centrifuge imports to improve the separation effect of the equipment.

If you are related to the technology or related equipment in soil -cleaning, please contact GN Solids Control.

The oil -containing sludge treatment system produced by GN SOLIDS Control is mainly used to handle the mud from the drilling platform, refinery and oil tank at the bottom of the oil. It is designed for processing high viscosity and high -quality solid amounts of mud. After the GN oil -content sludge treatment system is treated, it can be obtained from three products: oil, water and solid.

Last week, GN Solids Control provided overseas project customers with a complete set of oil -containing processing equipment. The main configuration included:

1. Material pumping vacuum pump module

This module mainly includes air compressors, gas tanks and vacuum pumps. The GN vacuum pump is a pump with air as the power source. The air compressor in the module generates the power to provide power to the vacuum pump through the air tank. The vacuum pump can be used to transport drilling waste, industrial slurry, chemical powder, building aggregate, sludge, kitchen waste and other materials. Its powerful transportation capabilities make it perform well in terms of mud transportation and can complete the transportation task well. Provide a guarantee for the following premixing hot washing module.

2. Premier hot cleaning module

Due to the high solid content, large viscosity, and poor liquidity that customers need to deal with, GN Solids Control has set up premium hot washing modules, mixed with tanks with mixers to prevent the sludge from precipitation. At the same time, the mixed tank has heating function. By stirring heating and dilution, the material has better liquidity, so that the vibration screening module can be transported through the submersible pump.

 

3. Shale Shaker screening module

The Shale Shaker produced by GN SOLIDS Control can separate a larger solid particles from the diluted clay, creating more suitable conditions for the separation of the snail centrifugal. GN SOLIDS Control can also produce Shaker Screen at the same time, and the screen network meets the API RP 13C standard.

4. The separation module of the solid liquid solid liquid in the reclining snail

After the shacking of the Shale Shaker, the sludge pump was split into the Decanter Centrifuge for two phases. The solid oil content after isolated is ≤5%, and the liquid phase is mainly oil and water. The solid phase can be treated in the next step, and the liquid phase is transported to the disc separator through the screw pump.

The oil -containing sludge treatment system designed by GN SOLIDS Control is of great significance for waste treatment. It can be used to reduce quantitative treatment and recycle a large amount of oil. Energy -saving and emission reduction, waste use, and efficient recycling, in line with the global trend of the global environmental protection industry.

If you have any need for oil -containing sludge treatment equipment and schemes, please contact GN Solids Control.