Month: June 2022

GN Solids Control is a professional manufacturer of solid-liquid separation equipment. After more than 10 years of continuous research and development and innovation, GN Solids Control has become a well-known brand in the domestic solid-liquid separation equipment industry, and has established overseas branches in the United States and Russia.

Last week, GN Solids Control delivered a prospecting and coring drilling mud handling system to a client in Chile.

The prospecting and coring drilling mud processing system mainly includes:

1. GN Shale Shaker GNZS752F

As the pre-treatment equipment of the mud treatment system, the vibrating screen is of great significance. It can separate the large solid particles in the mud, and the treated mud can enter the centrifuge for treatment. The GN GNZS752F shale shaker has a small footprint and is economical.

2. GN Decanter Centrifuge GNLW223D

The 9-inch centrifuge manufactured by GN Solids Control, also known as micro centrifuge, has a compact structure and good processing performance, and is widely used in the core drilling industry. The drum is made of dual-phase stainless steel centrifugal casting, which has better performance; the screw pusher is protected by a replaceable wear-resistant alloy sheet, which has a long service life and is easy to maintain and replace; the depth of the liquid pool can be adjusted according to needs to meet different needs. It can adjust the dry and humidity of the material under different conditions; the centrifuge has undergone three dynamic balance treatments before leaving the factory to ensure that the centrifuge runs stably under medium and high speed conditions.

3. GN mixing funnel and centrifugal pump

The drilling fluid treated by vibrating screen and centrifuge needs to ensure its specific gravity by adding chemicals such as bentonite, barite, etc. Mixing funnels and centrifugal pumps produced by GN Solids Control can be used in conjunction with customers to prepare drilling fluids. Ensure that the mud is used normally.

4. GN mud tank

The conditioned drilling fluid can be stored in a mud tank. If necessary, it can be delivered by centrifugal pump.

If you have any needs regarding mud handling systems, please call GN Solids Control.

GN Solids Control is a professional solids control and waste disposal equipment manufacturer. After more than 10 years of continuous research and development and innovation, GN Solids Control has become a well-known brand in the domestic solids control equipment industry. GN Solids Control also supplies a variety of transfer pumps in complete sets, including feed pumps, submerged slurry pumps, centrifugal pumps and sludge vacuum transfer pumps.

The solid vacuum pump is a pneumatic pump with air as the power source, which can be used to transport mine tailings, drilling waste, industrial slurry, chemical powder, construction aggregate, oil sludge, kitchen waste and other materials. GN Sludge Vacuum Pumps are available in a variety of models including GNSP-40B, GNSP-20B, GNSP-10B and GNSP-05B. The model supplied this time is GNSP-05B, also known as Mini industrial sludge vacuum pump, which can be used for oil spill recovery. Its unique structural design enables it to operate in harsh environments with low maintenance rate, and can transport solid, liquid or solid-liquid mixtures and high specific gravity materials with good fluidity at high speed. Its working principle is that the high-efficiency Venturi device generates up to 25 inches of HG vacuum to suction materials under strong airflow, pure pneumatic equipment. Meet various explosion-proof requirements.

 

We know that oil spills are inevitable during sludge disposal. It is also difficult to clean and recycle, and it takes a long time. But with the help of the Mini Industrial Sludge Vacuum Pump, cleaning up and recovering oil spills is no longer a headache. It has the characteristics of being movable, equipped with a portable suction port, connected with a hose, and equipped with a variety of suction heads, which can quickly recover the spilled oil, clean up the site, and meet the needs of customers.

If you have any needs about GN vacuum pumps, please contact us.

For more than ten years, GN Solids Control has been manufacturing decanters for handling drilling mud. In recent years, GN Solids Control decanters have been successfully used in drilling mud processing sites in many countries and regions. GN Solids Control decanters have gained a good reputation in performance. It has been successfully applied in both land drilling rigs and offshore drilling rigs. It can not only meet the tropical environment in the Middle East, but also meet the use in high-latitude and low-temperature environments.

    GN Solids Control Decanter Centrifuges range from 9″ drums to 30″ drums. The two high-speed centrifuges sold this time are GN Solids Control’s best-selling models in the oil drilling industry, 14-inch centrifuges: GNLW363.

1. High density solid phase separation centrifuge

Medium speed decanters are typically used for high density solids separation. The most commonly used high-density solid phase separation centrifuge is the GNLW452D series. For 18-inch centrifuges around 1800RPM, it is also commonly used in drilling mud barite recovery applications.

 

2. Low density solid separation centrifuge

In order to remove drilling mud China, the low density solid phase (LGS) which is harmful to drilling, GN Solids Control can provide high speed centrifuges at 3200RPM or above. In the rig solids control system for oil and gas drilling, a medium-speed centrifuge and a high-speed centrifuge are usually matched. Two frequency conversion centrifuges can also be used for more flexible speed adjustment to adapt to different drilling conditions.

3. Drilling waste treatment centrifuge

GN Solids Control can also provide complete drilling waste treatment systems, including decanter centrifuges and Vertical Cutting Dryer, Screw Conveyor, etc. Modular drilling waste treatment equipment or integrated skid-mounted systems can be provided according to customer needs. For drilling waste treatment applications, decanter centrifuges usually use variable frequency centrifuges to meet the application of different material conditions.

In addition to oil and gas drilling mud centrifuges, GN Solids Control also provides drilling fluid shale shakers, complete solids control systems, oily sludge treatment systems and other popular products.

GN Solids Control is a solids control equipment manufacturer offering complete systems for solids control and drilling waste treatment equipment. Last month, GN Solids Control completed the fabrication of 5 sets of vacuum degasser for a Chinese drilling company. GN Solids Control can manufacture three main different types of deaerators including vacuum deaerators, centrifugal deaerators and liquid gas separators.

     For this drilling company, GN Solids Control supplies a vacuum degasser, model GNZCQ360B, with a maximum capacity of 360 m3/h of drilling mud, and GN Solids Control also produces a small vacuum degasser, model GNZCQ270A, with a capacity of 270 m3 /h.

 

Both vacuum degasser and centrifugal degasser are used to remove fine air bubbles, while liquid gas separators are mainly used to remove larger air bubbles. The vacuum deaerator is mainly placed in front of the desander or desilter, and is installed behind the drilling fluid shaker. The mud treated by the vacuum deaerator is pumped into the mud cleaner for treatment. The drilling fluid treated by vacuum degassing can prevent gas intrusion and control the density of drilling mud. It is of great benefit to the follow-up centrifugal pump and mud pump work. For users with small installation space, GN centrifugal deaerator can also be selected to meet the same function and reduce the floor space.

In addition to vacuum deaerators, GN Solids Control also manufactures liquid gas separators. Liquid-gas separators manufactured by GN Solids Control, also known as mud-gas separators, are installed with a large distribution plate that evenly strikes the drilling mud in the high-level pipeline, allowing the liquid to flow down with gravity and the gas to separate from the liquid and gas. The top of the device is drained to a non-hazardous area. Usually, according to the customer’s working conditions, dangerous gases such as H2S can be burned with the help of electronic ignition devices.

The 5 sets of vacuum degasser will soon be shipped to the customer’s well site. Previously, GN Solids Control also provided this customer with some other solids control equipment, such as drilling fluid shale shakers, decanters. With the most satisfactory work performance, and professional and timely after-sales service. Our customers give high praise to our company.

GN Solids Control is a professional manufacturer of solid-liquid separation equipment. After more than 10 years of continuous research and development and innovation, GN Solids Control has become a well-known brand in the solid-liquid separation equipment industry at home and abroad, and has established branches overseas.

The sewage treatment decanters produced by GN Solids Control are widely used in mud purification systems, river dredging, municipal sewage treatment, industrial wastewater treatment and other industries.

 

With the innovation of technology, GN fifth-generation decanter centrifuges have been put into use in large numbers. The centrifuge used in the overseas sewage treatment project this time is GN’s fifth-generation centrifuge, its model is GNLW454ET-VFD, and the supply quantity is 2 units. The material to be treated is municipal sewage with a solid content of 2-3%, and the processing capacity of the centrifuge is 30-40m³/h.

GN Solids Control’s fifth-generation centrifuges are available in 9-inch, 14-inch, 18-inch, 22-inch, 30-inch and other models. According to material conditions and processing capacity requirements, this project is matched with 18-inch 450 series centrifuges to meet customers’ on-site use. Require.

This type of centrifuge uses 45KW main motor and 15KW auxiliary motor, the drum and screw of the centrifuge are made of SS2205, the collection box is made of stainless steel 304, the material distribution port of the screw pusher is provided with a carbide protective cover, and the slag discharge port is inlaid with hard alloys. Solid alloy protective cover, welding ribs on the inner wall of the drum, protection of the slag discharge port of the drum with carbide scraper protection, and protection of the spiral blade carbide sheet, the wear resistance is greatly enhanced, and the service life is linearly increased. At the same time, there are 2 temperature sensors and 1 vibration sensor to ensure the operation of the equipment. If there is an abnormality, it can be known in advance and prevent unnecessary equipment damage. Connecting the slag discharge port of the centrifuge collection box and the inlet of the screw conveyor is a closed rectangular tube slag discharge groove to ensure the environment on site. also it can work with vertical cutting dryer.

If you have any technical inquiries about centrifuge needs or solutions for complete equipment, you are welcome to call GN Solids Control.