Month: March 2022

As a well-known domestic solids control equipment manufacturer, GN Solids Control not only has excellent production and processing capabilities in solid-liquid separation equipment, but also performs well in conveying equipment.

Last week, GN Solids Control delivered 2 fully hydraulic driven centrifuges and 2 solids vacuum pumps to the customer.

1. Full hydraulic drive centrifuge

GN Solids Control and the well-known Swiss centrifuge hydraulic drive system brands Viscotherm and ROTODIFF jointly developed a fully hydraulic drive centrifuge to meet the high standard needs of domestic and foreign customers. The rotary drum and the pusher are driven by the hydraulic drive system through two oil circuits to drive the ROTODIFF motor and the rotary drum. The advantages of a fully hydraulically driven centrifuge make it useful for the separation of heavy slurries in high temperature environments. During the operation of the centrifuge, the drum speed and the screw differential speed can be independently and continuously adjusted manually and steplessly. The compact single skid structure makes it easier to install in the field.

2. Solid vacuum pump

The unique structural design of the vacuum pump enables it to operate in a difficult environment with low maintenance rate, and can transport solid, liquid or solid-liquid mixture and high specific gravity materials with good fluidity at high speed. Its working principle is that the high-efficiency Venturi device generates up to 25 inches of HG vacuum to suction the material under strong airflow, which is a pure pneumatic device. The pump body has a compact structure and is suitable for conveying high-density materials. Mainly used for ship bottom cleaning, tank bottom cleaning, cuttings transportation, mud and tail slurry transportation and animal manure, etc. The supply models are GNSP20B and GNSP40B each. The treatment capacity is 20m³/h and 40m³/h respectively, and the suction and discharge distances are 50m and 500m respectively (take clean water as the standard for reference).

GN Solids Control has delivered various solids control equipment and conveying equipment to domestic and foreign customers for many years, and has won many high-quality praise from customers. If you have any inquiries about equipment needs or solutions in this regard, please contact us.

GN Solids Control is a professional manufacturer of solids control equipment. After more than ten years of continuous development and innovation, GN Solids Control has accumulated rich experience in solids control equipment design and manufacturing. In the past few weeks, GN Solids Control has completed 4 sets of mud-water separation system for pipe jacking with 1000 GPM capacity, 1 set of 240 m3/h three-stage purification mud-water separation system and 3 sets of mud-water separation system for pipe jacking with 1500 GPM capacity for a customer in Southeast Asia .

1. 4 sets of GNMS-1000D pipe jacking mud-water separation systems include a double-layer shale shaker and 2 sets of 10-inch sand removal cyclones. The clean slurry treated by the bottom vibrating screen is equipped with a collection tank under the shale shaker. The slurry is sucked by a centrifugal pump and pumped into a desilting cyclone for secondary separation.

 

2. GNTBM-240 three-stage purification mud-water separation system, it is mainly composed of shale shaker, desander, desilter and 2 mud pumps. The three-stage purification mud-water separation system can handle large-particle mud. Most of the solids are first removed in the bottom coarse screen. In order to meet the requirements of high wear resistance, GN Solids Control engineers have made many special designs, such as the vibrating screen receiving bins are covered with wear-resistant PU, and the connection ports are also effectively protected.

3. In addition to the above separation systems, this project also includes 3 sets of GNMS-1500D pipe jacking mud-water separation systems. Similar to the 1000 GPM pipe jacking mud-water separation system, the GNMS-1500D also includes a double-layer shale shaker, 2 large 14-inch cyclones and a 75kw centrifugal pump.

4.GN Solids Control can provide standard mud treatment equipment as well as customized mud treatment system, welcome to consult.

GN Solids Control is a professional supplier of solid-liquid separation processing equipment. Most of the equipment it produces, such as vibrating screens, mud cleaners, decanters, and cuttings dryers, are widely used in the drilling industry.

Today we mainly introduce primary purification equipment shale shaker and secondary purification equipment mud cleaner

1. Shale shaker

GN shale shaker uses Italian OLI or American Martin motor, and Siemens Schneider is used for electrical components. Heavy-duty design, the overall heat treatment of the screen box, the vibration strength can reach 8.0G, which can meet the use of various working conditions. The shale shaker is mainly used for primary screening to separate solid particles above 100um. At the same time, the size of the screened particles can be adjusted by adjusting the mesh number of the shale shaker. The distributor distributes the mud to two shale shaker for simultaneous processing, increasing the processing capacity

 

2. Mud cleaner

The GN Slurry Cleaner is a compact treatment unit with a desander and desilter on the shaker to form a compact all-in-one module, which saves a lot of money compared to using the shaker, desander and desilter alone Use space and facilitate transportation. The mud cleaner provided to customers is equipped with a 10-inch desilting cyclone and a 4-inch desilting cyclone. The desilting cyclone can separate solid particles above 40-60um, and the desilting cyclone can separate 20-40um. The above solid particles provide guarantee for subsequent mud recovery or use of centrifuges.

In addition to shale shaker and mud cleaners, GN Solids Control can also provide various other solids control equipment, including centrifuges, cuttings dryers, mud transfer pumps and other equipment.

Feel free to contact the GN team.

GN Solids Control’s shale shaker is mainly used in projects such as the mud circulation system in the mud solids control system. Shale shaker with different numbers of screens can be used in different working conditions. With other equipment such as centrifuge and Mud Cleaner, it can fully meet the requirements of drilling. The high-performance drilling fluid shaker can directly or indirectly generate more economic benefits for our customers. The customers of this offshore platform drilling project ordered It is the mud vibrating screen and mud tank produced by our company.

Features and Benefits of GN Solids Control Drilling Fluid Shakers

1 Steel screen box bottom frame.

2 brand motor OLI, durable

3 The patented product of mechanical and electric synchronous lifting is both stable and reliable, and easy to operate, and can be operated without stopping

4 High excitation intensity up to 7.5G and adjustable

5 Quickly disassembled pre-tensioned design shaker screen, the screen is made of composite material, with longer life and better effect

6 The electronic control adopts Siemens Schneider electric components

7 Overall heat treatment of the screen box, high-quality anti-corrosion paint spraying

8 Unique screen box sealing design, can be used for high mesh screening

 

Features of GN Solids Control Screens

The screens used by GN Solids Control shale shaker are produced in strict accordance with API standards, and the replacement screens for shale shaker on sale can be ordered from our company. GN Solids Control provides different types of mud shale shaker including but not limited to the following content:

Composite plastic frame vibrating screen is made of composite plastic material cast frame and stainless steel wire mesh bonding, because the composite plastic material itself has high toughness and strong plasticity, so this product has a longer service life and a more beautiful appearance.

The screen is made up of the bottom frame and 2 layers and 3 layers of 304 or 316 stainless steel mesh cloth. Due to the different mesh numbers and punching holes, the screening effect of the screen is more fine. The lower layer of high-strength frame and support ribs and the upper layer of moderately tensioned screen cloth are closely combined, which greatly enhances the strength and durability of the screen, and achieves better screen filtering effect. The range of screen mesh is generally 20 Head to 325 head.

If you are interested in such products, please contact GN Solids Control