The three-phase decanter centrifuge for tank bottom sludge treatment is sold to African client

Recently, a three-phase decanter centrifuge from GN Solids Control was sold to African customers for the treatment of oily sludge. This three-phase decanter centrifuge is a solid, liquid, and liquid type three-phase decanter centrifuge. Its separation principle is based on the difference in the density of the mixture. The material port is discharged.

As a manufacturer specializing in the production of solids control equipment, GN Solids Control has been committed to the development and manufacturing of separation equipment for many years. GN Solids Control shale shaker, centrifuge, vertical cuttings dryer, disc centrifuge, stacked screw sludge dehydrator and other solid-liquid separation equipment. At present, GN Solids Control equipment has been used in many countries and regions around the world, designed in many industries and fields, and has been recognized by many customers around the world.

 2021.09.17 Tricanter Centrifuge

The centrifuge is the main equipment of GN Solids Control. The company has invested a lot of research and development funds. After years of continuous improvement, the GN Solids Control centrifuge has now become a very mature product. There are multiple types of classifications for different situations. Ensure the professionalism of the product. As a kind of precision fluid mechanics mechanical equipment, the centrifuge has very high requirements on the processing ability of the manufacturer. At the same time, the later maintenance of the equipment also requires a lot of attention. The supplement of grease for lubricating parts such as bearings should be used after the centrifuge is used. , Cleaning the inside of the equipment, these can greatly ensure the long-term stability of the equipment.

GN Solids Control is an enterprising and innovative R&D and manufacturing enterprise. Professionals from all walks of life are welcome to visit and guide.

Screw conveyors and screw pumps are sold to Africa Drilling Waste Treatment Service Company

GN Solids Control is a professional manufacturer of drilling solids control and drilling waste treatment equipment. After more than ten years of development, it has successfully established a deep foundation with many domestic drilling companies, oilfield companies and similar companies in many countries around the world. The cooperative relationship has been recognized by many customers. Recently, a batch of screw conveyors, screw pumps and other equipment independently produced by GN Solids Control were sent to a drilling waste disposal company in Africa.

Screw Conveyor

The GNSC series screw conveyor uses a rotating screw to push the conveyed material along the fixed casing to work, which can meet the conveying requirements of different working conditions and different materials. The length can be customized according to the customer’s on-site working conditions. GN Solids Control screw conveyor blades are made of wear-resistant thick manganese steel, which can be sprayed with wear-resistant coating to extend the service life. The bearing adopts the international famous brand NSK, which has stable operation and long life.

 2020.09.23-Decanter-Centrifuge-Skid

Screw feeding pump

The matching GNG30B-075V screw pump has a flow rate of 30m³/h, and the GNG10B-040V screw pump has a flow rate of 10m³/h. The GN Solids Control screw pump is an ideal equipment for supplying slurry to a decanter centrifuge, without shearing and stirring the slurry. GN Solids Control G series screw pump has fewer accessories, compatible structure, small size and easy maintenance. The rotor and stator are the vulnerable parts of the pump and are easy to replace. The stator is made of artificial rubber material, which is more conducive to conveying high-viscosity and hard suspended solid waste slurry.

Control cabinet

GN Solids Control designs and manufactures Exd series explosion-proof electrical control boxes, which can be filled with EU ATEX explosion-proof certification and international IEC Ex explosion-proof certification. GN Solids Control provides shells of different sizes and a variety of certified flameproof and positive pressure control cabinets to meet customer needs.

GN Solids Control can provide overall equipment technical solutions and solutions based on customer needs. Customers are welcome to inquire. please contact us in time if you need it.

GN sludge dewatering centrifuge runs well in customer factories in the Middle East

Recently, a set of sludge dewatering equipment produced by GN SOLIDS CONTROL has been put into operation in a customer factory in the Middle East. The equipment is operating in good condition and the customer is very satisfied. The system consists of a two-phase decanter centrifuge and a dosing device independently produced by GN SOLIDS CONTROL. The dosing device is used to mature the reaction agent and flocculate the material in order to enhance the separation effect of the centrifuge on the solid phase.

GN SOLIDS CONTROL is a professional solids control equipment manufacturing company. Its products are exported to many countries around the world. The decanter centrifuge is one of our core products. The centrifuge is independently developed and manufactured by GN. The centrifuge is coordinated with other equipment. , Such as Vertical Cutting Dryers/Shale Shaker/Screw Feeding Pump, have been applied in petroleum, chemical, food, sewage treatment and other fields, and have obtained quite good feedback. GN Decanter Centrifuge, classified according to the treatment effect, has three models. For clarification, drying and clarification and drying, GN can select suitable centrifuges for customers according to the different processing requirements of customers.

 2020.12.24-Mud-Decanter-Centrifuge

At the same time, no matter how good the mechanical equipment is, the professional maintenance of the equipment is inseparable from the customer. When the centrifuge is in use, there are some places that we need to pay attention to. Phase appears. Check whether the lubricating oil of the bearing or hydraulic oil station needs to be in good condition. After the centrifuge is used up, if it needs to be shut down for a long time, it is necessary to pump clean water and run the centrifuge before shutting down to remove the dirt in the centrifuge drum to avoid the drying and solidification of mud in the centrifuge drum to jam the equipment. Therefore, only in daily use, strictly follow the operating instructions to operate and maintain the centrifuge. In order to make it run more smoothly.

Please contact us in time if you need it.