Month: February 2021

GN Solids Control has been committed to a complete set of solid-liquid separation equipment systems and services for many years. After the Chinese New Year, GN Solids Control completed the manufacture of an engineering mud treatment system for an international engineering company.

The main processing equipment of this mud processing system includes:

1. Primary shale shaker

The GN Solids Control coarse Shaker is mainly used to remove boulders and aggregates. There is a conveying tank under the coarse vibrating screen to store the mud after the coarse screen. The mud is injected into the secondary fine screen vibrating screen by the submerged slurry pump.

2. Secondary shaker screen

The fine screen shaker of GN Solids Control is a double-deck vibrating screen used to remove most of the fine solid phase.

3. Three-stage screening mud cleaner

The mud after the secondary screening needs to be further screened with a mud cleaner to reach the centrifuge separation processing conditions. The mud cleaner produced by GN Solids Control uses a polyurethane material cyclone to extend its service life. The detachable cyclone bracket is convenient for customers to modify into a single vibrating screen, desander or desilter. The machinist’s screen box synchronous lifting device can meet the needs of screen box angle adjustment under non-stop working conditions.

4. Four-stage separation decanter centrifuge

The GN Solids Control decanter centrifuge is a finer solid-liquid separation device that can separate solid particles larger than 2-5 microns. In addition, it can be used in conjunction with chemical dosing devices to separate solid particles smaller than 2 microns. The flocculant and the slurry are transported to the decanter centrifuge for treatment by the screw pump.

GN Solids Control can also provide other auxiliary equipment, including mud agitators, walkways, ladders, guardrails, etc.

Recently, the GNLW-363ET-VFD sludge dewatering centrifuge independently developed and manufactured by GN Solids Control has been successfully sold to the sewage treatment plant in Southeast Asia for sludge dewatering at the back end of sewage treatment. GN customized this set of GNLW-363ET-VFD sludge dewatering centrifuge for customers based on years of experience in the research and development and manufacturing of centrifuge industry, and after in-depth communication with customers to understand the actual needs of customers’ sewage treatment plants. Southeast Asian customers are very interested in GN Solids Control. The sludge dewatering centrifuge solution provided is affirmed and we look forward to the next cooperation.

GNLW-363ET-VFD sludge dewatering centrifuge is a T series dewatering and concentrating decanter centrifuge independently developed by GN Solids Control. The half cone angle is 8.5 degrees. It is mainly used to separate liquid in solid particles and is suitable for comparing dryness Materials with high clarification requirements are separated and dehydrated. If centrifugal dehydration of fine-particle sludge wastewater is required, our company can also match the flocculation dosing system used with the sludge dewatering centrifuge for the customer to achieve the ultimate goal of the customer Separate processing requirements.

The diameter of the rotating drum of the GNLW-363ET-VFD sludge dewatering centrifuge is 360mm, the length of the rotating drum reaches 1512mm, the maximum speed of the centrifuge is 3900RTM, and the maximum separation factor can reach 3063G. The GN Solids Control sludge dewatering centrifuge electric control system is equipped with a stainless steel frequency conversion control cabinet, and the control system is integrated into the PLC. The frequency conversion control cabinet controls and displays the speed and differential speed, and can also monitor the operating status of the equipment, and can also Customers need to equip customers with automatic flushing and automatic dosing systems. If you have sludge dewatering needs or are interested in solid-liquid separation, please feel free to contact us.

Recently, GN Solids Control successfully customized a mud cleaner and a GN drilling fluid centrifuge for a foreign drilling company according to the customer’s on-site operation requirements, and successfully applied it to the customer’s drilling site, which was recognized by the customer. GN Solids Control is a solids control equipment manufacturer with rich experience in solid-liquid separation in petroleum drilling.

1. Mud cleaner

The GN Solids Control mud cleaner integrates three solids control equipment desander, desilter and vibrating screen into one processing module. The structure is compact, which can effectively reduce the equipment footprint, and the processing capacity can meet from 120-360 Cubic meters per hour. The desilter and desander are matched with 4-inch and 10-inch polyurethane cyclones respectively, which can effectively extend the operating life. In order to ensure the stability of the vibrating screen, the vibrating motors of GN Solids Control shale shaker all adopt international brands Martin or Oli. In addition, this set of mud cleaning is also equipped with a special jet mixing device and a slurry tank for customers according to customer requirements to meet the actual needs of customers on site operations.

1. Drilling fluid centrifuge

The drilling fluid centrifuge is mainly used to process the small solid phase in the oil drilling fluid. According to different customer needs, GN Solids Control can also provide customers with a medium-speed centrifuge to remove the solid phase of 5-7μm. If you need to remove the fine solid phase of 2-5μm in the drilling fluid, you can choose the GN high-speed centrifuge, and our company also It can provide customers with a flocculation dosing system for supporting centrifuges, and can integrate all operating systems into the PLC, improve equipment automation and reduce human intervention, improve production efficiency and reduce labor costs. GN Solids Control focuses on the manufacture of solid-liquid separation equipment. If you have any requirements for solid-liquid separation equipment, you can contact us at any time.