Month: January 2021

Recently, a set of Shale Shaker separation system produced by GN Solids Control was sold to a foreign environmental protection company.

As a separation equipment, shale shaker is widely used in various industrial production. It plays an important role as the primary equipment in the mud solids control system. This system adds new technology on the basis of the traditional vibrating screen, adding a clean water pipeline above the screen frame. When the shale shaker is working, the clean water pipeline can spray clean water onto the shale shaker screen. The addition of this technology improves the screening effect for some substances with higher viscosity and difficult to screen. The shale shaker separate system consists of a screen, a vibrating screen slurry pump, a clean water pipeline pump and a treatment tank. The system is completely independently developed and manufactured by GN Solids Control, which also reflects the advantages of GN Solids Control in system development and manufacturing. With more than ten years of development, the company has accumulated a lot of experience in the development and manufacturing of complete systems.

GN Solids Control is a manufacturing enterprise specializing in the production of solids control equipment. The shaker screen, the core equipment of the system, has long been the core product of GN Solids Control. The shale shaker produced by GN Solids Control has the following advantages and characteristics:

The vibration motor of GN Solids Control brand shale shaker adopts the Italian OLI or the American Martin brand, and its supporting GN brand explosion-proof electric control box, and the electrical components adopt Siemens or Schneider brand.

The vibrating screen box adopts heavy load design, and the overall heat treatment of the screen box, its vibration intensity can reach 8G.

A unique sealing design is adopted between the screen box and the screen of the shale shaker, which can not only protect the screen box, but also prevent fine materials from passing through the installation gap of the screen.

The bottom frame of the shale shaker box is designed with stainless steel, which has strong corrosion resistance.

The shale shaker box can ensure the angle adjustment without stopping the machine, and the operation is stable at the same time.

The successful delivery of this shale shaker system has set a good start for GN Solids Control‘s work in 2021. In the days to come, we will work hard to make high-quality products and serve every customer well.

Recently, a mud recovery system produced by GN Solids Control will soon be sent to a domestic engineering company. This is also a continuous order based on the customer’s long-standing trust in GN Solids Control. The sincere and tacit cooperation between the two parties will undoubtedly contribute to the booming domestic management. Net construction is the icing on the cake.

GN Solids Control has been committed to providing customers with professional mud treatment solutions and reliable solids control equipment. The project is also fully conducting technical exchanges with customers and combining the customer’s on-site use requirements to customize a mud recovery system. The system includes a 240 m3 and a 120 m3 economical mud recovery equipment, a set of mixing tanks, and two sets of storage. Mud tank, and a GNLW554E-VFD mud dewatering decanter centrifuge, this system can fully meet the requirements of mud mixing, processing and recycling of medium and large directional crossing construction.

After several years of research and development and testing, GN Solids Control has successfully developed a set of mud treatment solutions containing tailing slurry dewatering. This system first filters and shaker screens the large particles in the mud with the mud recovery equipment to reduce the solid content in the mud. For the small particles in the mud, the small particles are flocculated by adding flocculating agents, and then enter GN Solids Control’s own decanter centrifuge performs mud dewatering. After the solid-liquid separation treatment of the decanter centrifuge, the liquid phase part can be directly discharged into the sewage pipeline, and the solid phase part can be directly loaded and transported away. This greatly reduces the cost of tail slurry treatment for customers and also meets the national environmental protection requirements. After more than ten years of continuous development, GN Solids Control has been committed to the research and development and manufacturing of mud solids control equipment, and has accumulated a lot of experience in mud treatment. The company not only has a high market share in the domestic market, but also in the international market. More than 70 countries and regions in the world have established cooperation. Set up branches in the United States and Russia to better serve global customers. The long-term trust of customers is our driving force for continuous progress.

Recently, the drilling mud mixing tank manufactured by GN Solids Control has been successfully applied to the customer’s work site. The mixing tank manufactured by our company this time is a customized product according to customer requirements. Integrating two sets of mixing tanks and one set of jet mixing hopper into a skid-mounted structure, it not only meets the customer’s requirements for floor space, but also meets the road transportation requirements, and meets the frequent needs of customers for conversion work sites. According to the demand, the customer spoke highly of the mixing tank designed and manufactured by our company, which effectively solved the customer’s problem.

The jet mixing device provided by GN Solids Control for customers is mainly used to configure drilling mud and change the density, viscosity, acidity and alkalinity of drilling mud. When using, it only needs to transport drilling materials such as barite powder and related chemicals into the jet mixing funnel, and then enter the mixing tank after mixing through the jet mixing funnel. The jet mixing device provided by our company for customers By increasing the shearing force of the drilling mud in the pipeline, the dispersion effect of various materials in the drilling mud can be effectively improved, so that the various components in the mud can be fully circulated and mixed in the tank to ensure the performance of the drilling mud and improve the drilling efficiency and Safety. In addition to the high-performance jet mixing device, our company has also equipped customers with a explosion proof electric control system independently produced by GN Solids Control. The box body is made of aluminum alloy and all electrical components are made of ABB, Siemens, Schneider and other international The well-known brand effectively guarantees the safety and stability of the electronic control system. If you are interested in the jet mixing device produced by our company, please feel free to contact our company.

If you want to know more about GN Solids Control, we sincerely welcome you to inquire or visit our company.

A few days ago, the GNLW-454ET decanter centrifuge independently designed and manufactured by GN Solids Control was successfully sent to an environmental protection company in Tianjin, China, for sludge dewatering in a sewage treatment plant. GNLW-454ET centrifuge belongs to GN T series centrifuge. The half cone angle of T series centrifuge is 11°. It is suitable for removing liquid in solid phase materials, suitable for easy separation of large particles, large solid-liquid density difference, and low viscosity. , High concentration, solid-liquid separation for materials with large processing capacity and higher dryness than clarity requirements. The T series centrifuge selected by our company this time is finalized after laboratory analysis based on the characteristics of the customer’s materials and the materials provided by the customer, and we provide customers with a slurry supply pump and flocculation dosing system that match the GNLW-454ET centrifuge. , Customized a complete set of centrifugal dewatering system for customers to fully meet customers’ separation processing requirements and processing capacity, and may be highly praised by customers, fully affirming GN’s high-standard service and high-quality equipment.

The main parts of the GNLW-454ET centrifuge are made of phase stainless steel SUS2205 by centrifugal casting, which avoids the problems of intergranular corrosion and incomplete residual stress release caused by traditional welding methods, regardless of material and process The above are far superior to other competing products in the same industry. The centrifuge electric control system adopts PLC touch panel control, the sensor can be installed on the centrifuge to monitor the running status of the centrifuge and feedback to the control panel and automatically adjust the slurry supply of the slurry pump, saving labor costs and improving safety . GN Solids Control has always been adhering to win the trust of customers with high-quality products, high-standard services, and innovative technological innovations. If you have a demand or interest in the GN Solids Control centrifuge, you can call us directly.

If you want to know more about GN Solids Control, we sincerely welcome you to inquire or visit our company.