Month: November 2020

Recently, the separate skid-mounted cuttings dryer and drilling mud jet mixing device produced by GN Solids Control have been assembled and debugged and will be sent to a domestic drilling company.

The project mainly includes 5 GNCD930-GP vertical cuttings dryers and 4 300m³/h drilling mud jet mixing devices. Vertical cuttings dryers are used on offshore platforms, mobile workboats, land oil fields, etc. This equipment is designed to be used in a class of equipment for oil drilling waste treatment operations, which can realize oil-bearing drilling cuttings de-oiling treatment and water-based drilling cuttings It uses high-power broadband dual motors as the power source for functions such as reduction and emission compliance. The processing capacity of the cuttings dryer is 30-50 tons/hour. The upper part of the equipment is conical and the lower part is cylindrical. This equipment is suitable for marine, desert and land oil field operating environments.

The jet mixing hopper device, as its name implies, refers to the mixing of water, clay (mostly bentonite) and other chemicals through the jet effect produced by the venturi funnel to achieve the effect of mixing drilling mud. Usually in the process of oil drilling and natural gas well drilling, drilling fluid can help cement the hole wall to prevent collapse during drilling rig drilling. Drilling fluid is also called drilling mud, usually divided into three categories: water-based Mud (abbreviated as WBM), oil-based mud (abbreviated as OBM) and synthetic-based mud (SBM).

GN Solids Control now has multiple sets of cuttings drying systems serving multiple oil fields in China, and processing water-based cuttings and oil-based cuttings separately. In addition, GN Solids Control also reached a strategic cooperation agreement with AKROS, a major Russian mud service company, and became a supplier of Gazprom (Gazprom for short), supplying solids control equipment all year round.

If you want to know more about GN Solids Control, we sincerely welcome you to inquire or visit our company.

Recently, employees of GN Solids Control are busy with the commissioning of the mud station project. This order is an integral part of the end customer’s 30000BBL mud station project. The order will be shipped to end customers in South America in the near future.

GN Solids Control is unanimously committed to providing customers around the world with a variety of mud service equipment, which can deal with OBM oil-based mud, WBM water-based mud and SBM composite-based mud. In order to meet the diverse needs of customers, GN Solids Control can also implement customized design and production for customers.

The mud station orders that have been shipped this time mainly include the following equipment:

1. 500BBL mixing tank

The mixing tank contains 2 sets of non-interference mud mixing hopper, which are powered by 2 independent submersible pumps. When one pump fails, the other submersible pump can be easily switched to avoid downtime.

The mixing tank adopts 2 sets of two-impeller mud agitators to prevent the drilling mud from sedimentation. In addition, it is also equipped with 2 mud guns for fixed-point flushing of the corners of the tank.

The top of the mud tank is made of mesh board. This 500BBL mixing tank adopts a skid-mounted structure, with a small rectangular size, and can be moved by a flatbed truck.

2. 7000BBL storage tank system

After the drilling mud is mixed and stirred, a centrifugal pump with quick couplings transports the drilling mud to the storage tank. The storage tank system has 14 vertical storage tanks of 500 barrels, with a total storage capacity of 7000 barrels.

These 14 vertical storage tanks are all designed with magnetic flap level gauges to display the liquid level. On the other side of the storage tank, a horizontal base is designed. When the storage tank needs to be placed horizontally, the horizontal base can ensure the stability of the storage tank. Another centrifugal pump can be used to suck and discharge the mud from the storage tank, or to suck the mud from the mixing tank.

As a leading supplier of solids control equipment and drilling waste management systems, GN Solids Control is committed to providing cost-effective solutions to global customers. If you are interested in this, welcome to contact us! If you want to know more about GN Solids Control, we sincerely welcome you to inquire or visit our company.

Recently, the small solid-liquid separation complete system equipment produced by GN Solids Control has undergone rigorous testing in the factory and is ready to be loaded and shipped to the European customer project site.

Big quantity orders of GN Solids Control come from repeat orders from old customers. It is believed that the stable quality and performance of GN’s products can give customers confidence in GN Solids Control’s products.

So what are the characteristics of GN Solids Control equipment that can stand out among many domestic solid control counterparts? The following introduces the advantages and characteristics of the core products of this system, GNLW223D-VFD decanter centrifuge and GNZS752F-MDZF vibrating screen;

GNLW223D-VFD decanter centrifuge parameters:

Centrifuge model GNLW223D has a critical capacity of 130 l/min;

Conventional throughput 100 l/min, drum diameter 9inch (220mm);

Drum length 26. .4inch (670mm) critical drum speed 4500RPM;

Conventional drum speed 3800RPM separation factor (critical) 2492G;

Separation factor (conventional) 1777G main motor power 15HP (11KW)

GNZS752F-MDZF shale shaker parameters

Model GN ZS 752F-M D ZF Vibration track straight line;

Processing capacity (m:/h) 45 Vibration motor power (kw) 2×1.0;

Number of screens (pieces) 2 Screen size (mm) 750x 900;

Screening area (m2) | 1.35 Excitation strength ≤7.5G;

Double amplitude (mm) 4.14-5.96 Screen box adjustment angle +2°;

Mud tank type overhead cofferdam height (mm) 714;

Weight (dry grams) 929 length x width x height (mm) | 1816 x 1657 X 1083

In addition to the small solid-liquid separation system introduced above, GN Solids Control also produces a complete set of oil&gas drilling solids control systems, trenchless and CBM drilling mud recovery systems, piling and shield mud purification systems, drilling waste treatment systems, industrial environmental protection Solid-liquid separation system such as mining. If you want to know more about GN Solids Control, we sincerely welcome you to inquire or visit our company.

Recently, two small snail sludge dewatering machines produced by GN Solids Control supporting flocculation dosing systems are sold to Southeast Asia and used for waste treatment in food factories.

The GN Solids Control screw sludge dewatering machine is an economical and environmentally friendly sludge dewatering equipment. It uses the principle of screw extrusion to generate strong extrusion force through changes in screw diameter and pitch, as well as the small size between the moving ring and the fixed ring. The gap is a new type of solid-liquid separation equipment for squeezing and dewatering sludge.

The GN Solids Control snail sludge dewatering machine is composed of a fully automatic control cabinet, a flocculation modulation box, a sludge thickening and dewatering host, and a sump. The GN Solids Control sludge dewatering machine is equipped with GN Solids Control automatic control technology, which can realize flocculation under the condition of fully automatic operation, and continuously complete the sludge thickening and squeezing dewatering work, and return or discharge the collected filtrate.

GN Solids Control screw stacking machine is widely used in municipal sewage treatment projects and sewage sludge treatment in aquaculture, food, starch, grease, pharmaceutical, chemical, paper, leather and other industries.

Advantages of snail sludge dewatering machine:

1. It is suitable for a wide range of sludge dewatering and can be used for oily sludge treatment.

2. The equipment runs continuously and automatically, and it is not easy to be blocked.

3. Low investment and operating costs, and no secondary pollution.

4. Energy saving and environmental protection, and the equipment covers a small area.

5. The sludge can be dehydrated under aerobic conditions to avoid the release of phosphorus from anaerobic sludge dehydration

If you want to know more about GN Solids Control, we sincerely welcome you to inquire or visit our company.