Month: September 2020

As a leading domestic manufacturer of drill cuttings processing systems, GN Solids Control can provide customers with drill cuttings processing equipment and drill cuttings conveying equipment such as high specific gravity mud purification centrifuges, drill cuttings dryers, and screw conveyors. The drill cuttings dryer produced by GN Solids Control is particularly good at processing oil-based drill cuttings and composite-based drill cuttings.

As one of the most important markets of GN Solids Control, Russian customers have been loyal customers of GN Solids Control’s drilling cuttings processing system for many years. Last week, GN Solids Control completed another container drilling cuttings processing system for the customer.

1. Drill cuttings dryer
GN Solids Control drill cuttings dryer, also known as vertical cuttings dryer, can treat the oil content in cuttings to less than 5%. GNCD930E drill cuttings dryer, 930 means that the maximum diameter of the sieve basket is 930mm, and E is the version number of the dryer. According to different working conditions and on-site feedback, GN Solids Control has been committed to continuously upgrading all solids control equipment and drilling waste treatment systems. The processing capacity of the GN Solids Control GNCD930E drill cuttings dryer is 30-50 tons/hour, and the screen basket can be equipped with three optional specifications of 0.25mm, 0.35mm and 0.5mm. In order to facilitate the maintenance of equipment, GN Solids Control has also innovatively equipped customers with lifting devices.

2. Chemical dosing system
In order to remove the finer solid particles, the drilling cuttings are processed by the GN Solids Control drill cuttings dryer, and the liquid will enter the decanter decanter centrifuge for further processing. After chemical dosing, it can help the decanter centrifuge to separate fine particles smaller than 5 microns. The GN Solids Control chemical dosing system is automatic dosing control, which can automatically control the dispensing and the adjustment of dosing amount according to actual requirements.

3. Container part
Integrating the operating parts inside the container and equipped with explosion-proof air conditioners can not only provide a comfortable operating environment for operators, but also reduce the constraints of weather and environmental factors on operations, and greatly improve production efficiency. Received unanimous praise from on-site personnel.

Welcome contact us if you need learn more about our project

GN Solids Control is an industry-leading manufacturer of solids control separation equipment and an overall solution provider for drilling waste management systems. GN Solids Control provides hundreds of separation system solutions to customers in many countries around the world every year. At present, GN Solids Control’s product line includes a full range of shale shakers, desanders, desilters, degassers, vertical cuttings dryers, decanter centrifuges, vacuum pumps, screw pumps, and sand pumps.

GN Solids Control can also produce different types of chemical dosing systems customized for customers. Recently, the chemical dosing system we ordered for a customer in Africa is a standard container dosing system. This set of dosing system includes PAC dosing device, dosing tank, explosion-proof air conditioner and container. All components are highly integrated to facilitate rapid movement and operation between different work sites. The main components include the following parts:

1. Dosing system

According to the needs of centrifuge processing capacity, GN Solids Control can customize different types of automatic dosing systems for customers. The agitator in the mixing system includes a motor, a reduction box, a shaft and an impeller, which can be used to fully mix the powder medicament.

2. Pharmaceutical mixing system

The medicament mixing system is used to provide mixed medicaments for the centrifuge. In this system, the medicine can not only be thoroughly mixed and stirred, but also the PH value in the mixture can be adjusted.

3. Container part

Integrating the operating parts inside the container and equipped with explosion-proof air-conditioning can not only provide a comfortable operating environment for the operators, but also reduce the constraints of weather and environmental factors on the operation, and greatly improve the production efficiency. Received unanimous praise from on-site personnel. More question, welcome contact GN Solids Control

Recently, an engineering company signed a purchase order for four sets of mud systems with GN Solids Control. Now GN Solids Control is in full swing to ensure that the order is delivered on schedule.

The customer of this project is an order signed after full technical exchanges and factory inspections in the early stage. The customer fully understands the technology and production strength of GN Solids Control, and has a better understanding and trust in our company. So, nowadays the mud treatment equipment market is mixed, with uneven capabilities. How should customers choose a mud purification system? Below I summarize the following tips:

1. Look: Looking at the product appearance and processing details, a company’s manufacturing capabilities and business philosophy can be directly reflected from the product appearance, and the control of details reflects a company’s rigorous attitude.

2. Comparison: compare operating costs, no matter which processing equipment is, there are corresponding wearing parts, such as shaker screens, springs, cyclones, centrifugal pump impellers,centrifugal pump casings, etc., the materials used for wearing parts , Structure and processing technology can directly affect the service life, that is to say, choosing a reliable brand can directly save operating costs.

3. Test: Test the treatment effect of the equipment. The sand content of the mud after treatment is the most important indicator to reflect the treatment effect. The current minimum indicator is 5%, that is, the sand content in the mud after treatment cannot exceed 5%, otherwise It will adversely affect the mud pump and mud performance.

How to judge: Buy a special mud testing instrument and put it on the construction site. Party A will praise you for your professionalism! (If you touch the pulp with your hand and feel the sensation of sticking your hands, it will basically exceed 5%)

4. Measurement: The actual treatment capacity of the equipment is measured. The mud equipment nameplate has the treatment capacity content. If the treatment capacity of 50m³/h is filled on the nameplate, the actual treatment capacity should be 50m³/h. The treatment capacity varies with the mud condition. There will be slight changes, but the work efficiency is generally not less than 80%.

More question, welcome contact GN Solids Control

Analyzing the current status of my country’s existing decanter centrifuge manufacturing industry, it is understandable that my country’s centrifuge manufacturing process technology and foreign centrifuge manufacturing, new technology research and development, especially the reliability, stability, service life, assembly accuracy, and flexibility of operation There is still a certain technological gap in aspects such as sex, humanity, and the application of certain new technologies. However, these technological gaps are also gradually shrinking with my country’s independent R&D and manufacturing capabilities, product innovation capabilities, and R&D capital investment. At present, this gap is gradually narrowing.

Obviously, GN Solids Control’s centrifuge manufacturing process and technological innovation are in The domestic GN Solids Control decanter centrifuge has begun to stand at the forefront of the domestic decanter centrifuge manufacturing industry, and has become a leader in the technological innovation and manufacturing process of domestic centrifuges. GN Solids Control has a variety of decanter centrifuge types, each of which has different functions for separating materials. For example, GN Solids Control GNLW series centrifuges are used to separate oil and gas drilling fluid produced during drilling. The centrifugal high-speed operation can realize the separation of drilling fluid, and it has the characteristics of high speed, long life and obvious separation effect. GN Solids Control Decanter Centrifuge has undergone many years of technical updates and changes in structure and technology. Especially it uses high-quality wear-resistant alloy materials to protect the screw pusher. The working conditions are often timed and easy to maintain and replace. , The advantages are more obvious.

Decanter centrifuges my country has gone through more than 50 years of technological development from the introduction of decanter centrifuges internationally to the present independent research and development and manufacturing. However, there are not many manufacturers dedicated to the research, development and manufacturing of decanter centrifuge technology. Most companies in my country are based on the replication of foreign products, often lacking independent R&D and technological innovation capabilities. GN Solids Control P series decanter centrifuges are usually used to remove liquid from solid materials. It is suitable for the separation of materials that are easy to separate, large particles, large solid-liquid density difference, low viscosity, high concentration, large processing capacity, and higher dryness than clarity requirements. It is used in petrochemical, agriculture, food, environmental protection waste treatment, and biology In the fields of medicine, health, etc., the sedimentation speed of different materials under the action of the centrifugal force field will have different centrifugal force differences, so as to realize the solid phase separation, liquid-liquid separation of materials. Since the centrifuge has been used, among the separation factors, the rotation speed has undergone a transition from low speed to high speed. From the perspective of rotation speed, the rotation speed of the decanter centrifuge can be divided into low speed, medium speed, and high speed centrifuge adjustment ranges. The equipment has low speed, medium speed and high speed centrifuges. The speed characteristics of the machine, the equipment system is composed of several parts such as a motor drive system, a circulating cooling system, a mechanical system, a rotating drum and a PLC control. Compared with a floor-standing centrifuge, the size and capacity are different.

More question, welcome contact GN Solids Control