Month: July 2020

Recently, five GNLW454EY decanter centrifuges with large length-to-diameter ratio produced by GN Solids Control have been commissioned and accepted in a large domestic power plant. The centrifuge for this project adopts intelligent, automated, and efficient customized design at the request of customers. GN Solids Control centrifuge is very satisfactory.and GN unit is widly use in oil&gas drilling mud treatment system,drilling waste treatment,and other solids liquid separate solution

This customer is a subsidiary of a well-known domestic energy group in China. Because the GN Solids Control brand equipment has the characteristics of stable operation, good processing effect and preferential prices, it has gradually gained the trust of customers and gradually expanded its application within the group company. In addition, our company has also reached strategic partnerships with Shenhua Group, Beiken Energy and Jinmei Group. As a fixed and high-quality supplier, our company has cooperated with Russia’s largest mud service company AKROS and Gazprom (Gazprom for short) for more than ten years, supplying mud solids control and dewatering equipment all year round.

The GN Solids Control GNLW454EY-VFD series decanter centrifuge for this project is designed to treat sludge with a single processing capacity of 40m3/h, a drum diameter of 450mm, and a drum length of 1890mm, with a maximum design speed of 3800RPM. Using frequency conversion control, the normal speed is adjustable between 0-3500RPM. The maximum separation factor is 3084G, and the separation particle diameter is 2-5μm. The main motor power is 45KW, and the auxiliary motor power is 11KW. The dewatering cone end of the Y series decanter centrifuge has a half cone angle of 15 degrees, which belongs to the GN Solids Control drying and clarification integrated machine. EY series centrifuges are usually used to separate materials with high viscosity that require clarification and drying.

The following are the characteristics of the GN Solids Control 454EY series centrifuge:

1. The drum is made of duplex stainless steel SS2305 by centrifugal casting, and its performance is better than the counterparts SS304 and SS316.

2. The centrifugal casting process makes the drum more uniform and has a good dynamic balance performance.

3. The slag outlet of the centrifuge and the pulp outlet of the screw pusher are all inlaid with tungsten carbide hard alloy sleeves, which are extremely resistant to wear and are not easily broken.

4. The screw pusher is inlaid with wear-resistant alloy sheets, which has a longer life and reduces the number of maintenance.

5. PLC control panel control, the sensor can be placed on the centrifuge to monitor the status of the machine.

GN Solids Control EY series decanter centrifuges are mainly suitable for solid-liquid separation of mineral oil, chemical viscous materials, fruit juice, coffee, tea, wine, soy milk, biodiesel, starch, etc. If you want to know more information about Hebei Guanneng Company, we sincerely welcome you to inquire or visit our company.

Recently, 4 sets of fully hydraulic driven centrifuges produced by GN Solids Control for a customer in MENA area have been delivered. As we all know, GN Solids Control, as a well-known domestic and international manufacturer of Wollo centrifuges, has been committed to the development and manufacture of centrifuges of various specifications and models for many years.

At present, GN Solids Control is one of the few domestic manufacturers that can provide customers with both motor-driven centrifuges and hydraulic-driven decanter centrifuges. In GN Solids Control’s centrifuge product sequence, decanter centrifuges with drum diameters of 14 inches and 18 inches are mainly powered by hydraulic drives or VFD power.

Due to the double impact of falling oil prices and the COVID-19 epidemic, the development of the global oil and gas industry has been extremely slow this year. However, when the customer tried to find the best cost-effective separation equipment, GN Solids Control successfully provided solid control equipment and drilling waste management system. So far, GN Solids Control has provided solid control systems and drilling waste management systems to more than 70 countries and regions around the world.

Good brand reputation brings more and more orders to GN Solids Control. Currently, GN Solids Control has provided hundreds of orders for MENA area customers. Usually, orders from MENA area are large-amount orders with high technical requirements. With the rapid development in recent years, the separation equipment we provide, whether it is the stability of the equipment or cost-effectiveness, has far exceeded the expectations of customers.

This time, GN Solids Control supplied 4 hydraulic centrifuges to customers, and the driving devices were Swedish Viscotherm and Rotidiff. All these centrifuge drums are 14 inches in diameter and are cast from SS2205 or SS2304 high-performance stainless steel. The screw feeder of the centrifuge is protected by wear-resistant tungsten carbide tile. In addition to 4 hydraulically driven centrifuges, we also provide this customer with 4 manually adjustable screw pumps. The main components of the screw pump are manufactured by NETZSCH.

If you have requirements for hydraulically driven centrifuges, you are welcome to call us to communicate with us.

Since its establishment, GN Solids Control has been committed to providing world-class drilling customers with first-class shale shaker. After years of hard work in the domestic and foreign markets, the shale shaker manufactured by GN Solids Control have been seen everywhere on drilling sites around the world. As an important market for GN Solids Control, there are hundreds of GN Solids Control shale shaker, mud cleaners, decanter centrifuges and debris spinners on the Indian market to help customers carry out drilling mud purification and drilling waste management operations .

As we all know, if you provide equipment to Indian customers, especially large Indian oil and gas drilling companies, DGMS mandatory certification is essential. This batch of shale shaker provided to customers by GN Solids Control has passed DGMS explosion-proof certification. GN Solids Control also provides IECEX or ATEX explosion-proof control systems for different markets.

GN Solids Control currently has three production plants: two close to Beijing International Airport and one close to Tangshan City. At present, GN Solids Control is implementing automatic welding robots to weld the shale shaker to ensure the consistency of the weld quality. The sealing device on the bottom frame of the vibrating screen adopts the unique patent structure of GN Solids Control. The working angle of the shale shaker can be easily adjusted from one side by using a screw.

The screens on the order shale shaker are also independently produced by GN Solids Control. The screens produced by GN Solids Control have passed API RP13C certification to ensure that the screening effect and screening accuracy of the screens meet the requirements of this standard.

One of the biggest advantages of this batch of shale shaker is that each shale shaker can achieve linear motion and elliptical motion:

Linear motion is suitable for drilling mud with large flow rate, low viscosity, high solids content, large particles, especially hard solids; while elliptical motion is mainly used to handle fragile drilling mud, high viscosity solids.

GN Solids Control only uses top brand vibration motors such as American Martin or Italian European power. The electrical components in the control box are mainly Schneider brand.

If you need to use the shale shaker, please contact us as soon as possible.

Recently, the separate skid-mounted cutting dryer and decanter centrifuge produced by our company have been assembled and commissioned, and will be sent to an internationally renowned oilfield service company. use for drilling cutting waste management.After the user of the project visited our company to carry out the heavy-duty test machine acceptance of this equipment, we gave a high evaluation to the processing volume and dryness of our company’s vertical cutting dryer and other equipment in oil-based mud treatment.

The project mainly includes 4 sets of GNLW363C-VFD decanter variable high-speed centrifuge and 2 sets of GNCD930E-GP vertical cutting dryer. The GN Solids Control GNLW363C-VFD type decanter high-speed centrifuge for this project is specially designed for the characteristics of high density and high solid content of waste slurry. By optimizing the structure of the centrifuge drum, the processing capacity of the centrifuge is greatly improved And improve the dryness of the discharged solid phase. The GNCD930E-GP vertical cutting dryer for this project reduces the probability of internal blockage by optimizing the internal rotor structure and support structure, reducing the labor intensity of maintenance personnel and reducing maintenance costs. The designed processing capacity of the equipment is 30 tons per hour, and the oil content of the cuttings after drying is below 5%.

Our company now has multiple sets of drill cuttings drying systems serving multiple oil fields at home and abroad, and treats water-based drill cuttings and oil-based drill cuttings separately. In addition, our company has also reached a strategic cooperation agreement with Russia’s largest mud service company, and became a supplier of Gazprom (abbreviated as Gazprom), supplying solid control equipment all year round.

If you are interested about this news, welcome contact GN Solids Control to get more detail