Month: April 2019

The complete oil-based sludge treatment system recently produced by GN Solids Control is ready for delivery. GN Solids Control has injected more essence into the quality assurance and technology of the oil sludge treatment system. The complete oil sludge treatment system is now available. Successful operation in many countries at home and abroad, oily sludge treatment system is widely used in waste sludge oil sands generated by crude oil tank cleaning, waste sludge oil sands in refineries, drilling waste oil sands and other fields, bringing many customers Good economic and social benefits have won the favor and praise of our customers.

The oil-containing sludge treatment system mainly includes: the heating pre-mixing tank system is mainly pre-mixed by heating and chemical demulsifier, and then pumped into the vibrating screen for large particle sieving treatment. The oil slick system mainly extracts the oil from the upper part according to the principle of gravity settlement. The solid-control separation system is mainly the sieve separation of the shale shaker and the two-phase separation of the centrifuge. Based on the state of the sludge on the part of the site, it may be necessary to add a chemical before entering the centrifuge. The secondary cleaning tank and the secondary separation centrifuge are mainly The material is further washed and further separated by two phases. The three-phase disc separation centrifuge mainly separates oil, water and mud. The oil-water separator mainly separates the oil and water. The oil and water will overflow to the corresponding buffer tank respectively. The oil pump and the pump will clean the oil and water. Delivered to tanks and tanks. The water purification equipment is to further purify the water again.

The complete oil-containing sludge treatment system produced by GN Solids Control is specially designed for the treatment of sludge oil sands. Customers are welcome to come and consult. More question,welcome contact GN solids control

The shale shaker and solid-controlled decanter centrifuge produced by GN SOLIDS CONTROL are sold to Russia, and the shale shaker and solid-controlled decanter centrifuge will be sent to the Russian oil field for drilling mud treatment. This time, Russian customers learned about the shale shaker and solid-controlled decanter centrifuge products, and chose to cooperate with GN SOLIDS CONTROL to sign a procurement contract. It took only a short time. Russian customers learned about equipment and compared with domestic counterparts. After that, I believe GN SOLIDS CONTROL has advantages in the domestic oil drilling industry and solid-liquid separation.

The shale shaker and solid-control decanter centrifuge produced by GN SOLIDS CONTROL can provide different processing capabilities and customized products according to the needs of customers. shale shaker and solid-controlled decanter centrifuge are the first-level solidification of oil drilling mud solid control system. Phase control equipment and four-stage solid-phase control equipment, GN SOLIDS CONTROL produces a wide range of shale shaker, which can be applied to mud processing of trenchless HDD, water wells and mining core drilling to meet the compact separation of small throughput. The requirements of the purification system can also be applied to oil and gas drilling, large-scale non-excavation drilling rigs, and screening treatment in industrial separation, which can meet the requirements of large-capacity mud system. The double-layer sieve produced by the company can also be applied to the screening treatment of piling shield construction mud treatment and industrial multi-stage separation. The solid-controlled decanter centrifuge produced by GN SOLIDS CONTROL separates the drilling suspension according to the principle of centrifugal sedimentation. The suspension enters the drum from the feeding tube through the liquid outlet hole of the auger, and the solid phase particles are under the action of centrifugal force. It is pushed to the inner wall of the drum, and is pushed out to the small end of the drum by the blades on the auger, and the liquid phase overflows through the overflow hole at the big end of the drum. This continuous cycle, in order to achieve the purpose of continuous separation, can be very good to meet customer site requirements.

GN SOLIDS CONTROL wholeheartedly welcomes friends who are interested in our products to visit our factory and negotiate cooperation intentions. We will serve you wholeheartedly.

More question,welcome contact GN solids control

Recently, GN Solids Control completed the manufacturing orders for a batch of solid control equipment from customers in Uzbekistan. These devices are now undergoing final factory inspection and test operations, and these devices will then be sent to Uzbekistan. Today we take a look at what GN Solids Control has for customers that are designed for use in solid-state equipment operating at low temperatures and cold temperatures.

Shale Shaker and mud cleaners are the first and second stage separation devices in the solids control system. It is understood that the drilling fluid used is back from a large number of drilling debris in the well. A vibrating screen is used to remove coarse chips from the drilling fluid. The mud cleaner of the subsequent equipment is to separate finer-sized cuttings.

A vibrating screen is a solid particle separation device that separates the liquid phase from the liquid phase based on the diameter of the cuttings and the pores on the screen. The mud cleaner uses a centrifugal principle to separate solids and liquids.

GN-type cuttings vibrating screen and mud purifiers are the leading solid-state control equipments in China and have the following advantages.

1. The structure of the vibrating screen is simple, but it is heat-treated in the production process to achieve the purpose of structural strengthening.

2. There are additional horizontal beams on both sides of the vibrating screen deck to withstand higher G forces.

3. The vibrating screen mesh adopts composite material frame, which has long service life and large screening area.

4. The bottom frame of the vibrating screen frame is made of stainless steel.

5. The composite damping spring is covered by rubber to prevent rust and protect the operator’s operation.

The centrifuge is a GNLW363 model with a drum diameter of 14 inches and a maximum working speed of 3200 RPM. This model is a very popular model in the drilling fluid recycling and waste cuttings market in the petroleum industry. The drum material is duplex stainless steel 2305, which has better processing performance than SS316L. The spiral is protected by a tungsten alloy, and the solid discharge port is made of a hard alloy material, which prolongs the service life of the equipment, reduces maintenance, and brings greater benefits to the user.

More question,welcome contact GN solids control